Extends the HA soak harness with a new --array-soak mode: small (N=2)
and large (N=10000) array submission sub-rounds, each with one clean
kill/failover, asserting one WAL record per submission regardless of
array size, per-element addressability (status/cancel/completion)
spread across low/mid/high indices post-failover, and a real
millisecond-resolution replay-time bound comparing large-array vs
small-array kill-to-addressable latency.
waldump.c gains a WAL_JOB_ARRAY_SUBMIT case in wal_type_name() so the
scenario can grep an exact type name for its live WAL-record-count
delta check.
Went through one remediation round: the replay-time measurement
initially used whole-second resolution (collapsed to 0s/n-a on a real
run) and never asserted on the comparison, giving zero actual evidence
for the O(1)-replay-time requirement. Fixed with $EPOCHREALTIME
(millisecond resolution -- this sandbox's BusyBox date silently
mangles the more common `date +%s%3N` idiom) and a real bound
assertion that hard-fails the run on a genuine O(N) regression,
independently verified to have real teeth.
Live-verified 3 times with genuinely discriminating numbers each time;
final run: small=210ms, large=163ms -- large-array replay was not
slower, live evidence of the feature's O(1) claim.
Task 6.1 of job-array-single-wal-record (Requirements 4.3, 5.2, 5.3,
8.2, 8.3). Depends on and reuses task 6.0a's own soak verification.
run-ha-soak.sh: scope every pgrep/pkill to this run's --workdir, not just
binary name + --myname. An unscoped pkill -9 -x xce_controller (old
cleanup()) killed every xce_controller on the machine, including a
different concurrently-running soak's live primary — root cause of the
first bug-1436 misdiagnosis (a killed-out-from-under-it primary produced
a genuine, correctly-reported ECONNRESET that looked like a libxce bug).
.wolf/*: anatomy/cerebrum/buglog updated for bug-1435/1436, session and
token-ledger trail.
bug-1433: raft_cb_become_leader runs synchronously off peer_ctrl_dispatch_to_pool,
which hardcodes VTASK_LIVENESS for every inbound peer-control packet including
vote replies. The bug-1431 round-2 fix (flusher_flush_once force-flush in
persist_promotion_advance_committed) was reachable from that never-blocks task
class -- same bug family as bug-1198. Removed the force-flush; round-3
(durable-capped only) plus the already-shipped bug-1432 immediate-first-heartbeat
fix close the visibility-latency gap non-blockingly. TRACKED RESIDUAL:
persist_apply_pump_run_sync is still reachable on the same VTASK_LIVENESS path
and does bounded pread() -- lower risk (page-cache-hot) but strictly still
blocking I/O; not safe to remove outright (reopens bug-1043-family job loss),
needs its own follow-up (reclassify peer_ctrl_classify's winning-vote-reply case
or dispatch promotion tail onto a fresh VTASK_LIVE_BLOCK vtask).
bug-1434: persist_promotion_advance_committed and ha_standby_advance_committed_and_apply
raced on persist_t.committed_lsn via an unlocked load-then-conditional-store during
the promotion window (before ha->role flips to CTRL_PRIMARY) -- a losing racer could
regress committed_lsn. Added persist_committed_lsn_advance_atomic (CAS retry loop,
lock-free) and routed both call sites through it.
Validated: 19/19 unit test suites, 6-round chaotic soak (0 loss/divergence) + 6-round
sequential+leadership-coverage soak, both PASS. Also folds in raft-apply-decoupling
and raft-ha-core-safety validate-impl phase bumps to "implemented" and clears
config-upgrade-snapshot's now-satisfied entity-bearing-snapshots block.
- xce-build.sh: `controller` component now always builds `controller/xce_test`
alongside `xce_controller`, in every profile — xce-test-ha needs both
binaries and previously had to build xce_test as a separate step.
- xce-build/SKILL.md: removed `context: fork` — reproducibly broken for this
skill (confirmed twice): whenever ARGUMENTS is non-empty, the forked
subagent never receives a usable task and silently does nothing. Documented
that this skill should instead always be dispatched via the plain Agent
tool with a fully-resolved, self-contained prompt (not `context: fork`,
which failed) — proven to work end-to-end.
- xce-test-ha/SKILL.md, xce-deploy-ha/SKILL.md: replaced the blanket "never
invoke via subagent" warning with the precise finding — `context: fork`
(Skill-tool isolation) is the confirmed-broken mechanism (its own teardown
SIGHUPs the whole controller process group mid-soak/mid-deploy), but
Agent-tool subagent dispatch is a different mechanism and is safe
(empirically verified: a `setsid nohup ... & disown` process launched from
inside an Agent subagent survives that subagent returning, reparented to
init). Documented both the foreground-blocking and fire-and-forget
subagent patterns for each skill; xce-deploy-ha additionally flagged that
its `start.sh &` should gain `setsid` to match the soak driver's stronger
detach pattern before relying on unattended subagent dispatch.
40-round sequential HA soak FAIL at round 36: verify_no_loss reported
"0/111 jobs confirmed present" right after a fresh election, even though the
new primary's own log confirmed it stayed CTRL_PRIMARY throughout and
successfully committed the new jobs. Not a real data-safety bug.
Root cause: the client's failover retry loop (client_failover.c) can exhaust
its 20-attempt budget during a rapid post-election retry storm without ever
reaching the new primary, and the budget-exhaustion path only overrides the
surfaced error for RETRY_BACKOFF exhaustion (-E_XCE_NOT_READY) — not for
RETRY_NOW exhaustion, so a stray E_XCE_STANDBY from a standby the retry loop
happened to land on gets surfaced as if it were a hard, permanent rejection.
verify_no_loss() did a single one-shot check with no retry at the driver
level, unlike the job-submit loop in the same file which already retries on
this exact "primary likely just promoted" condition.
Adds a bounded retry (3 attempts, 2s settle sleep) around the whole
verify_no_loss check, mirroring the existing submit-retry rationale. Left
client_failover.c untouched (battle-tested library, many other consumers) —
fixing at the test-driver level is safer and fully local.
Validated: 40-round sequential (123 jobs, zero loss, all 3 nodes led) and
40-round chaotic (123 jobs, zero committed divergence, zero committed job
loss) soaks both PASS.
Found via extended chaotic /xce-test-ha soaking on top of the bug-1419 fix
(same session). Both bugs independently caused the 10-round chaotic soak to
fail; sequential and chaotic now pass cleanly and repeatably.
1. Term-desync liveness deadlock (new): a standby that loses a near-
simultaneous election race to a peer can legitimately end up at a HIGHER
term than the peer that actually won and became primary. The primary's
now-stale-term AppendEntries/heartbeats are correctly rejected by the raft
library, but every one of those rejected messages was ALSO resetting the
standby's own liveness deadline (ha_on_heartbeat_received), so its
liveness timeout never fired and it could never start a fresh,
higher-term election to let the cluster self-heal — a permanent stall.
Fix: ha_msg_term_is_stale() gates the liveness reset (and
ha_discover_primary step-down) on the incoming message's own term stamp,
skipping it for provably-stale messages, in cluster.c's wal_catchup_entry
and nop/heartbeat handlers.
2. bug-847 (root-caused 2026-06-30, never fixed): a per-sub-entry `payload`
Data blob in a multi-entry WAL catch-up batch loses its capnp pointer once
the message crosses a segment boundary — the receiver decodes
raw_payload_len=0 for entries at/after the boundary and silently persists
empty WAL entries (structurally intact: correct LSN/term/CRC chain, empty
content). Only surfaces when a node rejoins and catches up a real batch,
which is why it needed a live chaotic soak (not the 2-entry unit test) to
reproduce. Fix: carry every sub-entry's payload concatenated in ONE
top-level batchPayloads blob instead of one Data blob per entry — a
single top-level blob does not exhibit the cross-segment loss. Sliced
back apart on decode using each sub-entry's own wirePayloadLen, a plain
scalar that (like lsn/entryType/term) decodes via the generic generated
decode path and was never subject to the bug. Confirmed via targeted
diagnostic logging that the corrupted entry arrives already-empty over
the wire (not a receive-side race), and via a faithful reproduction at
live JOB_SUBMIT payload size (5×3560B) after the original 2-entry/
14×872B tests turned out not to cross a segment boundary in this
environment.
Incidental fixes found and fixed along the way:
- A real self-deadlock (persist_entry_term() re-acquiring p->lock from
inside a caller that already held it) introduced by an initial, ultimately
unnecessary WAL-read locking fix attempted before bug-847 was pinned down;
fixed via a new persist_entry_term_locked() lock-free counterpart. Left in
place as a genuine (if incidental) hardening of ha_stream_wal_to_standby's
read consistency.
- .claude/skills/xce-test-ha/SKILL.md's `context: fork` frontmatter caused
the skill's own forked sub-session teardown to SIGHUP the whole
xce_controller process group mid-soak, killing all 3 nodes silently with
no error logged, whenever the soak was launched via the Skill tool itself
(setsid/nohup inside run-ha-soak.sh only protects against a controlling
terminal's own SIGHUP, not a parent forked-session's teardown). Removed;
added explicit guidance to launch long soaks via direct Bash from the main
session instead.
Verified: full 78-group unit regression sweep clean (0 failures) after each
change; two consecutive clean 10-round chaotic soaks and one clean 10-round
sequential soak on the final binary (zero committed divergence, zero job
loss, all 3 nodes led in both modes).
jobid_range_exists() (c->jobmgr) and the in-flight registry (job.c,
per-process, only populated by this node's own handle_jobsubmit calls)
both miss a real cross-node case: a client's XCECLI_FAILOVER_CALL retry
resends the same client-generated jobid after a connection drop, and the
resend lands on a newly elected primary that never processed the original
request. If the original was already committed before the old primary
died, the new primary's own local WAL already holds it (Raft Leader
Completeness) but jobmgr hasn't applied it yet — both existing guards see
nothing, so the resend appends a second, genuinely committed WAL_JOB_SUBMIT
entry for the same jobid. A live chaotic soak reproduced this exactly
(waldump: two committed entries, same term, matching apiserverId/timestamp/
sequence, one second apart) — apply's own idempotent dedup keeps jobmgr
correct, but replay's raw WAL_JOB_SUBMIT count no longer matches jobmgr's
growth, firing a false APPLY_DIVERGENT fence and deadlocking promotion.
Fix: apply_committed_entry()'s WAL_JOB_SUBMIT case now claims the jobid in
job.c's in-flight registry (new job_wal_commit_claim/release, wrapping the
existing inflight_range_try_add/remove) for the duration of dispatch,
regardless of whether this node originated the submission or is applying a
replicated/replayed entry. A resend landing mid-dispatch on any node now
sees the same -EEXIST rejection self-originated in-flight submits already
get. Release only fires when the claim call added the entry, so a
self-originated submission's own claim/release lifecycle (unchanged) is
never double-released or stolen.
Also fixes 4 pre-existing tests that broke under the earlier checkpoint_lsn
fix (0eb1054) and were missed in that commit's regression sweep: cluster-
less fixtures where last_applied_lsn never advances now correctly get
checkpoint_lsn=0 unless the test simulates apply catch-up, matching the
new (correct) semantics. One assertion in
test_checkpoint_tail_with_no_snapshot_is_apply_clean compared Phase 1's
checkpoint_lsn against Phase 2's independently-reconstructed physical WAL
tip — that equality only held under the pre-fix current_lsn-tracking
behavior and is removed, not patched around.
Also hardens run-ha-soak.sh's start_node() with setsid+nohup: a forked/
background test-harness invocation whose session tears down mid-run was
silently killing every controller process via SIGHUP forwarding (observed
twice — deploy completes, ~1s of activity, then all 3 nodes die together
with no error logged).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VgT3n4vTv4ZjCuCTmzed1F
Chaotic mode's run_chaotic_rounds restarts "the previously-downed node"
every round unconditionally via start_node(\$DOWN), but a round that skips
(no primary to kill) never updates \$DOWN -- so a stale node name reaches
start_node again while its own earlier restart is still alive, stacking a
second xce_controller on the same --myname/port without ever killing the
first. Six stacked ctrl-2 processes were observed by the end of a 10-round
run.
Fixed inside start_node itself with a pgrep guard, rather than reworking
run_chaotic_rounds's DOWN bookkeeping, so every call site is covered:
refuse to launch a duplicate if "xce_controller --myname \$1" is already
running.
Verified: re-ran the identical 10-round --chaotic soak that surfaced this.
The guard fired on every skip-round; exactly 3 xce_controller processes
alive throughout the entire run.
Note: the same soak run still hits a genuine, separate election-liveness
stall (a surviving node fenced non-promotable by a real apply-correctness
divergence, traced to non-identical duplicate WAL submits for the same
jobid) -- filed as bug-1419, not fixed here.
Adds --factstream HA soak mode driving real jstart/jfinish/jfail worker-fact
traffic against a live 3-node cluster, killing the primary mid-stream and
asserting zero committed-state divergence and zero phantom fact reactions.
Building this scenario surfaced bug-1416: persist_recover()'s boot-time
apply-correctness verification can race the live apply pump and the standby
live-replication apply path, both of which mutate the same last_applied_lsn/
job-table state the verification re-reads live -- producing a false
APPLY_DIVERGENT that permanently fences an otherwise-healthy node. Fixed with
a new persist_t.recovery_complete gate that defers only the in-memory apply
(never the durability write or replication ACK) while a recovery pass is in
flight, closed from the earliest safe point in myapp_run() so an election-
retry candidate can't apply live traffic before persist_recover() ever runs.
Round-2 adversarial review independently verified the ACK/durability paths
stay ungated, reproduced the myapp.c fix as load-bearing via revert-and-
reproduce, and confirmed real-divergence detection still fires. Live 3-node
factstream soak: 2/2 rounds PASS, zero APPLY_DIVERGENT across 5 recover
calls. controller_unit_test: zero new failures across 23 groups.
Root cause: peer_ctrl_msg_handler held ep->dispatch_inflight incremented
across the entire peer_ctrl_dispatch_to_pool call, including its inline
fallback (the common cold-start shape when ha->pool isn't wired yet). That
inline body can reach raft_cb_become_follower, which -- now that
cluster_init_phase2 ran synchronously earlier in the same call chain and
wired the pool -- tears down its own loser vote-ep (the very ep whose reply
triggered this call) via the deferred path (vote_ep_teardown_async), whose
endpoint_mark_tearing_down spins waiting for dispatch_inflight==0 on that
SAME ep. That count is held only by this exact call, on this exact thread,
and can't reach 0 until the spin itself returns -- a permanent self-deadlock.
Confirmed live via a gdb thread backtrace: added a GDB_WRAP debug seam to
run-ha-soak.sh (launches a named node directly under `gdb --batch` so it
becomes ptrace-legal as gdb's own direct child under yama scope 1, bypassing
a live-attach restriction), then SIGINT to gdb once the log went stale for a
bounded interrupt + full backtrace. The frame dump showed pool=0x0 at
peer_ctrl_dispatch_to_pool, and the same ep pointer in the nested
vote_ep_teardown_async -> endpoint_mark_tearing_down frame, spinning on
sched_yield().
Fix: moved the dispatch_inflight release into peer_ctrl_dispatch_to_pool
itself, at the exact right point per exit path -- released BEFORE calling
the inline body on every fallback path (pool==NULL, OOM, enqueue failure),
since io_worker is single-threaded and the inline path never enqueues
anything (no pool-worker race left to protect against once inline execution
is committed to); released only AFTER the non-blocking enqueue completes on
the success path, preserving the original protection for the genuinely
concurrent pool-worker case.
New unit test test_vep_self_teardown_does_not_deadlock uses a bounded
pthread_timedjoin_np so a regression fails loud instead of hanging the
suite. RED confirmed via a temporary manual revert (ETIMEDOUT) before
restoring the fix.
Live-verified with both flags ON: --force-snapshot soak (the exact repro
shape) completes without hanging across repeated runs, confirms real
snapshot installs, zero divergence, zero job loss; a 6-round --chaotic soak
also passed clean; full controller suite green throughout.
g_drive_async_snapshot_offload and g_drive_async_peerctrl_dispatch_enabled
now default ON in production, closing raft-drive-async tasks 3.1 and 3.2.
g_drive_async_configpush_offload stays OFF -- a distinct, still-open hazard
in push_config_transport_only's endpoint handling (task 3.3, unrelated to
this bug).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014dZVSx3CdBjys9BB6hqpxP
Chain of fixes needed to get --force-snapshot soak to a real live PASS
(raft-ha-core-safety task 5.10a / ha-entity-snapshots task 7.1):
1. WAL segment rotation was gated on a hardcoded 64MB compile-time
constant; trim_wal_segments() never deletes the active (currently-open)
segment. At soak job counts a segment never rotated, so nothing was
ever physically trimmable and ha_evaluate_repl_action always chose
STREAM_WAL over SEND_SNAPSHOT for an empty-rejoining node. Fixed by
threading a wal_segment_bytes override through persist_config_t
(mirrors the --max-wal-records pattern: config.h default, persist.h
setter, persist.c 3 usage sites + minimum-floor enforcement, 6-point
CLI wiring through main.c/myconf.h/myapp.c/cluster.c) plus a new
--wal-segment-bytes CLI flag. run-ha-soak.sh's --force-snapshot mode
now sets WAL_SEGMENT_BYTES=4096 to force real rotation at soak scale.
2. This unmasked a genuine heap-use-after-free in INVOKE_MSG_HANDLER
(include/netio.h): the macro calls ep->msg_handler(ep) synchronously
(not via the vtask dispatcher, so the bug-1298 vtask ref/unref pairing
doesn't cover it) then writes ep->fsm_in.pkt = NULL. A stale vote-reply
handler chain (raft_on_vote_reply -> raft_cb_become_follower ->
endpoint_unref) could drop the endpoint's last ref and free it inside
the handler call, so the trailing write hit freed memory. This is the
first-ever live exercise of a node receiving a snapshot transfer while
mid-election. Fixed by holding a ref across the synchronous call, same
pattern task 5.8 established for the async path.
With both fixes: --force-snapshot soak now PASSES live (committed
divergence=0, job_loss=0, confirmed real "HA: snapshot" install on the
restarted node) — first genuine live proof of this scenario. 3-round
--chaotic regression clean. Full 217-test controller suite green
before/after every fix in the chain.
Builds on the delaymgr starvation fix (b9ad018) and walcompare
checkpoint-floor fix (f3c86a6) from earlier in this investigation.
Adds --max-wal-records (mirrors the existing --wal-sync-ms pattern:
main.c argp option -> myconf_t -> persist_config_set_max_wal_records())
so a deployment can force the WAL-record-count checkpoint trigger to
fire on a job count a soak can actually reach, instead of the
production default of 10000.
Adds a new `--force-snapshot` soak mode (run-ha-soak.sh): submits
enough jobs to cross the configured threshold, kills a non-primary
node, wipes its data dir (a genuine empty rejoin), restarts it, and
asserts the cluster reconverges with zero walcompare divergence and
zero job loss. Fails loud (not a false PASS) if the restarted node's
log shows no actual snapshot install, so the round can't silently
report success without exercising the real scenario.
INVESTIGATION FINDING (not yet resolved, this commit does not close
5.10a or ha-entity-snapshots 7.1): live-tested with temporary
diagnostic logging (since reverted). schedule_checkpoint() correctly
fires once wal_record_count reaches the configured threshold
(confirmed: "wal_record_count=100 max=100" logged), but the delaymgr-
scheduled checkpoint_task_fn never executes afterward -- no checkpoint
ever completes, no snapshot file is ever written, in a live multi-node
deployment. This is a separate, deeper issue in the delaymgr scheduling
path (or its wiring for this specific call shape), not a bug in this
commit's CLI plumbing or soak scaffolding -- both are built, tested,
and confirmed working up to the point where the async checkpoint
should run. Needs its own dedicated investigation (likely src/lib
delaymgr, not persist.c) before --force-snapshot can produce a PASS.
This also has production implications beyond the test scenario: if
confirmed, WAL checkpoints may never fire automatically today, meaning
WAL segments are never trimmed via this path in a live deployment.
controller_unit_test: test_ha_startup 34/0, test_ha_core_safety 28/0,
test_persist_checkpoint 5/0, test_walcompare 17/0 (no regression).
Soak --selftest 17/17.
The chaotic soak's walcheck()/walcheck_count() previously forced a
static `1 + 2*njobs` boundary onto walcompare, which doesn't account
for per-election NOOP WAL entries and overshoots the real tip --
producing spurious committed_divergence counts on an otherwise-clean
cluster (verified via waldump: byte-identical, gap-free WALs across
all 3 nodes despite a reported divergence=7).
Replaces the static estimate with the LIVE, authoritative committedLsn
(via the existing probe_primary client probe), applied as an explicit
--committed boundary only when the cluster is genuinely converged
(cluster_committed_converged) -- falling back to walcompare's own
auto-derive (min CRC-intact tip) when not, so a legitimately-lagging
just-restarted standby never gets a false "MISSING" verdict mid-chaos.
Pure auto-derive alone can't catch a member that permanently lost a
committed entry (its own low tip just becomes the shared boundary),
so this restores exact-boundary detection at every genuinely-settled
instant while keeping the auto-derive fallback for in-flight kills.
Also fixes a live-caught edge case in the same mechanism: a transient
ctrlstatus race can report committedLsn=0 for the primary right after
reconvergence; live_committed_boundary() now rejects a bare "0" as
untrustworthy and falls back to auto-derive, instead of handing
walcompare a vacuous --committed 0 boundary that would check nothing.
Selftest 17/17. Three independent fresh 6-round chaotic soaks (own
run + reviewer's reproduction + post-guard-fix re-run) all PASS:
committed_divergence=0, committed_job_loss=0, 6/6 elections, 21/21
jobs present throughout. No production C code touched.
/xce-build now takes a build PROFILE: asan (default, debug+ASAN -> xce.build,
backward-compatible), debug (non-ASAN -O0 -g3 -fno-inline -fno-omit-frame-pointer
-> build.dbg, for gdb/cores), release (-O3 -> build.release). Each profile uses
its own default build dir so variants don't clobber each other; arg2 may still be
a legacy build_dir. asan runs the unit suites; debug/release are build-only (the
suites are ASAN-oriented and the meson test harness is overlay-fs fragile, bug-924)
and print how to run a suite directly.
Why: bug-1282/bug-1286 are heisenbugs ASAN perturbs away (no SIGSEGV) and that
gdb-on-release turns into a hang/timeout. The non-ASAN -O0 -g3 build reproduces
them AND yields a symbolized backtrace under gdb.
It immediately paid off: the debug profile ROOT-CAUSED bug-1286 (the round-4
segfault) — myreq_handler (cluster.c:251) does `c = ep->owner` then
`ha_dispatch_gate(&c->ha,…)`; on chaotic restart a walCatchupEntry (op 37) vtask
runs with ep->owner==NULL, so &c->ha = 0x3ff0 -> deref crash at ha.c:3194. Fix is
a NULL-guard in myreq_handler (+ owner-lifecycle). 7.2 now has one remaining
blocker (bug-1286, root-caused); bug-1282 deadlock is fixed.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019dbTHR9CsEYK9RsqmQpQpC
run-ha-soak.sh start_node previously sent each controller's stdout+stderr to
/dev/null, hiding all crash output. Capture it per-node (logs/<node>.stderr).
That immediately revealed the true 7.2 6-round blocker.
Findings (research.md §"Task 7.2 on ~/tmp"):
- On the user's non-overlay ~/tmp, a 2-round chaotic soak COMPLETES and 6-round
rounds 1-3 each elect a higher-term primary — 5.2 + 5.3 hold live, job safety
holds (zero committed-job loss; committed prefix byte-identical across members).
- The 6-round stall is a RELEASE-BUILD SEGFAULT: a controller segfaults seconds
after being restarted into the churning cluster (recovery->failover/PreVote),
dropping the cluster to 1-of-3 so the survivor can't reach quorum. Captured
stderr: "<pid> Segmentation fault (core dumped) ... --myname ctrl-3".
- NOT consensus, NOT the in_catch_up deadlock (5.3 fixes that, unit-proven), NOT
bug-924 (a separate fdatasync wedge hit one earlier run only). ASAN-invisible
heisenbug; no gdb / no usable core in the sandbox, so the backtrace needs a
debug+core+gdb env.
Adds task 5.4 (root-cause+fix the chaotic-restart segfault) and bug-1281;
re-attributes the 7.2 block from bug-924 to the segfault. Also notes the soak's
divergence over-count (boundary 1+2*njobs vs primary committedLsn) as a separate
Phase-1 accuracy fix. Consensus work (Phase-2/5.2/5.3) is unit-complete and live-
confirmed for every round that completes.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019dbTHR9CsEYK9RsqmQpQpC
Release build block-buffers --logfile (flush on signal only), so log-grep
primary/convergence detection false-aborted. Replace all log-grep detection
with client probes (xce_test ctrlstatus): probe_primary/node_probe/
cluster_committed_converged. Both modes use shared helpers; 1.2 verdict
self-test 17/17 intact; bug-854 isolation preserved. Live release-binary
runs reach the verdict (chaotic re-confirms committed_divergence=3 / job
loss 0; sequential PASS). No production code touched. Phase 1 complete.
Verdict: raft-drive-async introduces NO new regression.
- Unit: controller_unit_test EXIT=0, xcelib_test 282/0 (all HA suites green;
dispatch/snapshot/configpush flags default OFF, inert).
- Live kill-based failover soak on a real fs (~/tmp), release + ASAN builds:
zero committed-JOB loss every completed round (jobs 3->12 monotonic).
- The 6-round CHAOTIC soak does not run clean to round 6 (fails ~round 4), but a
baseline comparison against pre-Phase-3 binaries (commit 21e26a1) fails round 4
IDENTICALLY (election stall / reconverge). The round-4 committed-prefix
divergence at LSN 9 is the documented pre-existing bug-851/795 family
(chaotic-failover silent divergence), present before Phase 3 and out of scope
for this spec. Logged as bug-1225 (baseline-confirmed).
Also: make the xce-test-ha soak driver's controller/xce_test paths
env-overridable (XCE_HA_BIN / XCE_HA_XT, backward-compatible defaults) — used to
run the baseline binaries through the same driver for the regression comparison.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01S6fDCtXkkEgupu7rUah1y2
Add an optional [dir] argument to the /xce-test-ha skill so the 3-node
soak cluster can be deployed to a caller-chosen path.
- run-ha-soak.sh: deploy dir resolves positional $1 > $XCE_HA_TOP > default;
relative paths absolutized in pure bash (this host's busybox realpath
lacks -m and would mangle nonexistent/relative paths).
- Fail-loud rm -rf guard: writes a .xce-ha-deploy sentinel at deploy time and
refuses to wipe a non-empty dir lacking it (protects a typo'd home/source
path); empty/nonexistent dirs stay safe to (re)deploy into.
- SKILL.md: document /xce-test-ha [rounds] [dir] and the safety semantics.
Verified: guard refuses an unmarked non-empty dir (dir survives, exit 1);
full 5-round soak into a custom dir PASS (18 jobs, zero job loss), cluster
landed in the named dir while the default dir was untouched.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MSxwb2Xt5F84ATgiAZnH8V
cleanup.sh is generated by deploy-ha.sh and already does the right thing:
keeps ctrl-1/conf/* and all certs, wipes ctrl-{2..N}/conf, all data/, and logs.
Update skill and CLAUDE.md to use it as the primary clean-restart command
instead of manual rm loops.
- .claude/skills/xce-deploy-ha/SKILL.md: new skill for deploying a
local 3-node XCE HA controller cluster. Covers build prerequisites,
deploy via src/tools/deploy-ha.sh, node startup with -vvv raft trace,
health verification checks, clean restart procedure, and a
troubleshooting table for common failure modes.
- src/controller/CLAUDE.md: add HA Cluster Deployment section with
quick-deploy commands, health check one-liners, and reference to the
xce-deploy-ha skill. Add src/tools/deploy-ha.sh to key files.
- create_lost_and_found(): provide hostattrs_t so makeWorker succeeds
- collect_queues/collect_workers (dataex.c): skip lost_and_found sentinel
so it is never pushed to apiserver or scheduler
- mark_worker_unavail(): reset hosttype/hostmodel to "unknown" and zero
all numeric attrs, then update resvals and slots — prevents stale
capacity from being visible while the host is down
- restore_worker(): apply the same attr reset on WAL recovery so
restored-but-unavailable workers advertise no capacity until reconnect;
also remove dead calloc() that was immediately overwritten by makeWorker
- Extract reset_hostattrs_unknown() helper to eliminate copy-paste
- Define XCE_LOST_AND_FOUND_NAME constant in config_repl.h; replace all
six raw "lost_and_found" string literals across config_repl.c and dataex.c
