One logger.Debug("resource-location stored", ...) call in
OnResourceLocationUpdated, immediately after store.ResourceLocations.Put,
logging resource/host/value as zap fields. Debug-level only, matches this
package's existing logging convention (reuses convert.go's field names).
Live-confirmed against a real deployment with logging.level: debug.
Also surfaced (but did not fix, out of boundary - pure Go change, no
possible causal link) a pre-existing xce_test segfault on string-typed
resupdate (type/model) - uninitialized stack memory, non-deterministic,
invisible to ASan. Logged as bug-1574; flagged in tasks.md as a risk for
task 7.1's default resource set and task 8.1's live e2e run.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bundles the fixes validated this session across ha.c/persist.c/worker.c:
- raft-apply-decoupling Task 7.4: apply-pump O(N^2) throughput regression
fixed via a segment-read cache.
- bug-1416: boot-time TOCTOU race in persist_verify_apply_correctness()
closed with a recovery-complete gate that closes at process-lifecycle
start, not function entry.
- bug-451: HOOK_DETAIL_JOB_RUSAGE_UPDATE now has its own persist hook arm
instead of silently falling through the default job-state case.
- bug-1426: trim_wal_segments() also caps its trim floor at the local
apply pump's own progress, not just remote standby-acked positions.
- bug-1427: persist_verify_apply_correctness() extended with a worker-count
check mirroring the existing job-count check (count_jobmgr_entries and
count_workermgr_entries now share one count_manager_entries(var) helper).
- bug-1428: persist_register_pending_apply's critical section widened to
close the actual race instead of patching a symptom.
- bug-1472 (remainder): WORKER_DEAD replay in worker_from_capnp() now
applies mark_worker_unavail()'s mutations via a shared
apply_worker_dead_mutation() helper instead of duplicating them.
- bug-1474 (angle-a): on_standby_connected's stale-duplicate detection
fixed for promoted vote endpoints via a shared votes_idx_for_peer()
index-scale converter.
Each fix independently verified via TDD (RED before fix, GREEN after).
Full ASAN rebuild + controller_unit_test: 1101 tests, 0 failures. Live
single-node HA deployment validated Task 7.4 and bug-1416 across 5
restart/recovery cycles (45/45 job submissions, zero APPLY_DIVERGENT
fences).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
XCECLI_FF_CALL (backing xcecli_heartbeat) can silently rotate+reconnect
the transport entirely inside a single call and still return success, so
heartbeat.go's failure-to-success transition detector could never observe
a reconnect that completes within one heartbeat tick -- the common case,
since elections finish in single-digit seconds against a default 30s
interval. apiserver's application-level rejoin never fired on a real
idle-period failover, and job pushes silently stopped reaching it.
Adds a monotonic reconnect_gen counter to endpoint_t (netio.h), bumped by
xce_ctx_reconnect() (xcectx.c) on every successful reconnect regardless of
trigger path. heartbeat.go now compares this generation every tick instead
of tracking success/failure transitions. Re-validated live against task
5.2's exact scenario (apiserver alone, zero write traffic): rejoin fired
22s after a primary kill, 12s after election.
Reopens and closes out component-failover-adoption's own NO-GO -> GO
validation cycle from 2026-08-15.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Audit of apiserver's three task-4.6 coverage areas (degraded-to-healthy
transitions, concurrent-request safety, candidate-list parity):
degraded-to-healthy and candidate-list parity were already fully
satisfied by tasks 4.1/4.5's own tests. Found one genuine gap: reconnect.go's
needsRejoin/checkAndPerformRejoin (task 4.3) had zero concurrent-access
test coverage despite being reached from 5 real concurrent HTTP-wrapper
call sites plus the heartbeat goroutine -- health.go's existing
50-goroutine stress test only covered the separate degraded-until
timestamp. One new test closes it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NNB4zGPCsHyDUCDJyMbiQN
Adds an atomic degraded-until state (health.go: IsDegraded/MarkDegraded/
MarkHealthy) that lets request handlers fail fast with a clear
unavailable error instead of blocking on xcecli's own ~100s retry
budget when the backend is known-degraded.
Consolidates what tasks 4.3/4.4 left as duplicated inline
"call xcecli_*; checkAndPerformRejoin()" pairs across five wrapper
functions into one shared callBackend() helper: checks IsDegraded()
before every call (fail fast, skip the C call and the rejoin check
entirely on the degraded path -- checking rejoin there would itself
block up to ~100s, defeating the fail-fast purpose), marks degraded on
-E_XCE_NOT_READY, marks healthy at checkAndPerformRejoin()'s existing
success point (the single call site both the write path and the
idle-period heartbeat path already funnel through).
The circuit breaker's own TTL-based state is deliberately never read
by the rejoin-retry mechanism -- checkAndPerformRejoin() has no
IsDegraded() dependency, so a fast-fail window never suppresses
retry-until-actually-joined; heartbeat.go's unconditional per-tick
call keeps that cadence alive regardless of degraded state, and a
10s TTL (well under the ~100s retry budget) lets write traffic resume
contributing once it clears.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NNB4zGPCsHyDUCDJyMbiQN
xcecli_heartbeat() is XCECLI_FF_CALL-wrapped -- a deliberately
non-retrying fire-and-forget path that does its own best-effort
one-shot reconnect but never calls xcecli_invoke_rejoin() (that only
fires from the write-call retry path). Left as-is, a controller
failover with no in-flight write request would silently repair the
transport connection without ever re-joining, permanently starving
push notifications.
runHeartbeat() gains two callback hooks fired at the right points --
onFailureToSuccess on a genuine transition, onSuccessTick on every
successful tick thereafter -- wired directly to task 4.3's existing
setNeedsRejoin()/checkAndPerformRejoin() from StartHeartbeat(). No
second rejoin mechanism: checkAndPerformRejoin() is a cheap no-op when
nothing is pending, so calling it unconditionally on every successful
tick is safe and matches the requirement that retry isn't gated on the
transition edge alone.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NNB4zGPCsHyDUCDJyMbiQN
Registers a rejoin flag-setter (go_backend_rejoin_handler) as the
client library's reconnect callback: zero I/O, sets an atomic flag,
returns immediately -- avoiding self-deadlock on the library's
per-ctx failover lock the same way worker's and scheduler's rejoin
callbacks already do. The C shim, its extern declaration, and the
xcecli_set_reconnect_handler() registration call all live together in
clib.go's xce_backend_init(), placed after xcecli_start()'s success
check (xcecli_start() wipes any earlier-registered handler as part of
its own init -- the same ordering bug found and fixed in worker's/
scheduler's task 2.3/3.1 work).
A shared checkAndPerformRejoin() helper wraps every gCtx.ctx-based
backend call (SubmitJob, ControlJob, ControlQueue, ControlHost,
FetchFile): after the call returns, if a rejoin is pending, issue
xcecli_join() as a separate step and clear the flag only on success --
on failure it stays set so the next backend call's return retries it,
no separate retry loop.
needsRejoin is a proper sync/atomic flag rather than a plain bool,
since apiserver (unlike the single-threaded C daemons) serves
concurrent HTTP requests that can all reach the shared helper at once.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NNB4zGPCsHyDUCDJyMbiQN
Replaces apiserver's two connect mechanisms -- a per-peer Go loop that
hardcoded nmasters=1 per attempt, and a separate direct-construction
path for the legacy single-host config -- with one pipeline:
buildClusterConfig() parses (via task 4.1's C parser) or synthesizes a
single-candidate config, validates it, then ConfigConverter
(xce_cluster_config_to_client_config) produces the client config for
one xce_backend_init() call. A 3-candidate config now actually
exercises the C library's own failover/standby-redirect handling on
initial connect, matching worker's and scheduler's task 2.1/3.1 work,
instead of a Go-level per-candidate retry loop that never built a real
multi-master config.
Along the way: found and fixed a genuine use-after-free. The deleted
tryConnect() freed its C.CString-allocated host address immediately
after its single connect call returned, but xcecli_ctx_init() stores a
raw pointer to the config forever (client.c:38) and every later
failover rotation re-dereferences it (client_failover.c) -- so any
reconnect after the first would read freed memory. Fixed by giving the
cluster/client config structs package-level, process-lifetime storage
(gClusterCfg/gClientCfg), mirroring worker's and scheduler's file-scope
static pattern, with host/from/key written into fixed-size C arrays
instead of freed heap pointers.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NNB4zGPCsHyDUCDJyMbiQN
Replaces apiserver's hand-written Go parsePeer() with a CGO wrapper
around the shared C parser+validator pair (xce_parse_peers then
xce_cluster_config_validate, both src/lib/cluster.c) that worker and
scheduler already use from their own main.c's. Gives apiserver the same
[name=]host:port[,...] syntax (including the name= prefix the old Go
parser could not express) and identical malformed-candidate rejection
(empty host, port <= 0, non-numeric port) -- round-1 review caught the
first pass skipping the validate() half, silently accepting inputs
worker/scheduler both reject.
A malformed entry now rejects the whole candidate list rather than
being skipped with a warning (matches xce_parse_peers()'s own
all-or-nothing construction and worker/scheduler's precedent) --
surfaced loudly via RegisterToBackend's error, not silently.
Parsing only -- RegisterToBackend()'s connect loop and tryConnect()
are unchanged; collapsing them into a single connect call is task
4.2's job.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NNB4zGPCsHyDUCDJyMbiQN
rshen/Letmein was a live, checked-in cluster_admin credential in
auth.yaml. Renamed to a non-identifying username with a clearly-marked
placeholder password.
docs: add full ops deployment guide (src/docs/deployment.md)
Covers building and running all four daemons plus xceadmin, based on
direct source verification (CLI flags, config file shapes, TLS posture)
and a live single-node deploy. Documents real production gaps (no
process supervision, plaintext non-controller traffic, exposed dev
creds) rather than treating the repo as a finished runbook.
bug-1463: commit 94f50ce6 (bug-1453 CA-cert-plumbing removal) missed
GetJobOutput's dead tls.Config/loadRootCAs block in request.go, plus
peek.go's SetRootCAs call and serverInfo.CACert field access (the
field no longer exists on APIServerInfo) -- broke the xcecli build.
Removed all three dangling references. Also enabled NewAPIClient's
previously-commented-out InsecureSkipVerify TLS config, since no
xcecli method set any TLS config at all -- any https:// apiserver URL
would have failed cert verification, not just GetJobOutput. Matches
bug-1453's documented design (server-side TLS only, no peer
verification, mTLS deferred as P3 hardening).
Documented both the api-server (http+https) and controller
(server-side-cert-only, no client certs) TLS postures in
.kiro/steering/security.md, replacing a stale line claiming TLS is
handled at the network layer, plus a follow-up note for the planned
HAProxy TLS-termination reverse proxy once its cert type and
apiserver's own listener fate are decided.
controller.capnp declared `struct Data $C.mapname("xce_data_t")` (an
OPCode_get query-result tagged union) at file scope, which shadows
Cap'n Proto's builtin Data blob type for every later `: Data` field in
the same file. This silently miscompiled 7 fields across 6 structs as
a struct-pointer type instead of a raw byte blob: UpgradeConfigRequest
.sha256/.bytes, ReplConfigReply.sha256/.bytes, ReplConfigPushRequest
.sha256/.bytes, ReplEnvelope.payload, SnapshotTransfer's chunk
payload, WalCatchupEntry.payload/.batchPayloads, and CtrlHelloRequest
.key. Production C code had already routed around it for years via
hand-rolled raw capn_ptr manipulation (see request.c's own comments);
nothing before now needed the generated codec/accessors to actually
work for these fields.
Renamed the local struct to XceData (capnp-level name only; the
$C.mapname("xce_data_t") C typedef is unchanged) and explicitly
repointed getdata/pushmsg at XceData by name, since those two fields
correctly want the local tagged union. Updated every derived
generated-identifier reference across 19 hand-written files spanning
controller, lib, scheduler, and the Go apiserver/xcecli CGo bindings.
Fixed 5 call sites in lib/request.c that had been typed against the
old workaround alias but now legitimately receive the correct
capn_data type (a pure type-name swap -- Data_ptr/XceData_ptr and
capn_data share the identical {capn_ptr p} layout).
Verified via full rebuild+test: lib (1/1), controller (3/3, incl. the
job-array push regression tests), scheduler (15/15), Go apiserver +
xcecli (all packages green), and a direct pycapnp round-trip proving
UpgradeConfigRequest.sha256/.bytes now encode/decode correctly.
Bug: bug-1461 (.wolf/buglog.json). Unblocks admin-config-tool task 3.3.
bug-1453: remove unused client-side CA-certificate plumbing. C-side:
drop ca_cert_path from xce_cluster_config_t, do_connect()'s ca_cert
param, --ca-cert flags on worker/scheduler, and controller's cert
population (TLS is server-side only, SSL_VERIFY_NONE everywhere on
the client side already, verified zero SSL_CTX_load_verify_locations
calls in the C tree). Go-side: delete xcecli's self-signed cert
TOFU-pinning flow (cmd/auth/cert/*), CACert field, SetRootCAs/
loadRootCAs, and every call site.
bug-1454: fix xcecli_ctx_t leak in scheduler.c sched_init() — the
unconditional initial ctx_init was never freed before the HA
candidate loop re-initialized it on the first iteration.
bug-1455: sched_init()'s memset(sched, 0, ...) was silently wiping
sched->cluster_cfg that main.c had populated from --peers just before
calling sched_init(), so --peers was always ignored and the scheduler
fell back to the hardcoded localhost:9990 single-host default.
Restructured sched_init() to take cluster_cfg as an explicit parameter
(assigned after the memset) instead of relying on caller-side
ordering with a separate sched_set_cluster_cfg() setter, which is now
removed.
bug-1456: revert an unsafe stack-local xce_client_config_t introduced
while fixing bug-1455 — xcecli_ctx_init() stores that pointer as
ctx->conf and client_failover.c dereferences it for the ctx's entire
life (runtime reconnect), so a per-loop-iteration stack copy would
dangle the moment sched_init() returned. Back to mutating the
caller-owned, process-lifetime config in place.
Verified: full ASAN build (all components), meson test suite 9/9 OK,
manual scheduler testsuite 15/15, Go build/vet/test all pass.
Cross-daemon integration test, test-only, spanning the scheduler (C)
and API-server (Go/CGO) receive paths built in tasks 5.1-5.4/5.3b.
Drives real xce_encode()/xce_decode() wire bytes through the actual
production dispatch chain on both daemons -- extract_data() ->
scheduler_req_handler() -> sched_handle_dataset() ->
sched_on_job_array() and go_push_handler() -> handleDataset() ->
cJobArrayToModels()/dispatchJobArray() -- skipping only vtask_entry()'s
~10 lines of static glue, mirrored verbatim in test code (the
if (callnext) treats-any-nonzero-as-proceed behavior that caused
5.3b's bug is reproduced exactly).
Redelivery is tested via genuinely independent fresh decodes of
separately-encoded bytes, not a decode-once-call-twice shortcut.
Bug-catching capability proven by temporarily reverting task 5.3b's
fix and confirming both the C and Go tests fail meaningfully, then
restoring to green -- confirmed independently by both the implementer
and reviewer.
Task 5.5 of job-array-single-wal-record (Requirements 6.1-6.5, 8.4).
This completes Phase 5 (Compact Scheduler/API-Server Push).
Adds the Go/CGO receive path for Data.jobArray, mirroring task 5.3's
scheduler-side C implementation: rawJobArrayToModels() (pure-Go
base_jobid + i expansion), cJobArrayToModels() (CGO adapter sibling to
cJobToModel), dispatchJobArray() (dedup via the same store.Jobs.Has()
the ordinary Data_data_jobs path already writes through, single
confirmation log only when at least one element was newly
dispatched), and a new case C.Data_data_jobArray in handleDataset.
Elements route through OnJobUpdated, matching the ordinary single-job
push's own routing. The CGO boundary needed no changes -- both
C.xce_job_submit_t and C.Data_data_jobArray were already exposed from
prior tasks, including task 5.3b's extract_data() fix which this
receive path depends on identically to the scheduler's.
store.ArrayJobs (the array-level rollup aggregate) is deliberately
left unpopulated -- confirmed out of this spec's scope, deferred to a
future spec per requirements.md's Boundary Context.
Task 5.4 of job-array-single-wal-record (Requirements 6.2, 6.4, 6.5, 8.4).
When a worker re-joins and already exists in workermgr, makeWorker_()
now overrides the existing slot instead of returning EEXIST. Admin-set
flags (LOCKEDU, CLOSED, HIDDEN, CLOSED_BY_ADMIN) survive the override.
Add XCE_WORKER_CLOSED_BY_ADMIN flag to distinguish admin-closed hosts
from workload-closed ones. worker_ctrl sets/clears it alongside CLOSED.
Refactor worker_init/worker_destroy into copy_worker/kill_worker helpers
shared by both fresh creation and override paths.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Three fixes:
1. ExecHosts.UnmarshalJSON: JSON null (sent when no allocation exists)
was treated as a non-"-" string because json.Unmarshal(null, &str)
returns nil with str="". This created a phantom HostSlot{NumSlots:1,
HostName:""} producing "<1*>" for every PEND job. Now null and ""
are both treated as empty hosts.
2. page_print_jobs.go: added !startTime.IsZero() guard so a zero
timestamp ("0001-01-01T00:00:00Z") never produces a start line
even if the status check is bypassed.
3. Added PENDING_REASON field to JobFieldsMap so it is requested from
the API when -l is passed, and rendered in printJobsVerboseOutput
for PEND/PSUSP jobs before the start-time section.
- parsePeer: use net.SplitHostPort (handles IPv6, stdlib convention)
- tryConnect: take Go strings, own CGO allocation internally
- RegisterToBackend: remove unreachable 'no HA candidates' error path
- Sync Peers field comment between utils and backend config structs
- COR-001: drain runHeartbeat goroutine via done channel before test returns,
eliminating race against concurrent SetHeartbeatInterval tests
- COR-002: replace time.After with time.NewTimer + defer t.Stop() + t.Reset()
to prevent timer goroutine leaks on context cancellation
- COR-005: guard HeartbeatInterval store write with > 0 check in OnClusterUpdated,
keeping store consistent with SetHeartbeatInterval's zero-ignore semantics
- add heartbeat.go with heartbeatIntervalSecs var, SetHeartbeatInterval, runHeartbeat (no build tag, CGO-free)
- add heartbeat_test.go with 5 tests covering interval validation and goroutine lifecycle
- add StartHeartbeat to clib.go (CGO impl calling xcecli_heartbeat)
- remove SetHeartbeatInterval stub from stub.go (now real code in heartbeat.go)
- remove TestSetHeartbeatInterval_StubNoOp from stub_funcs_test.go
- call SetHeartbeatInterval in OnClusterUpdated to track backend-pushed interval
- call backend.StartHeartbeat in cmd/main.go after backend registration
Add OPCode_notify handler in go_push_handler top-level switch
(not inside handlePush) to receive resource value updates from
the controller via xce_notify_data_t/schedUpdateResvals.
- Add 8 CGO union accessors for xce_val_t (which, i32, i64,
u32, u64, fval, str, bool) since CGO cannot access union fields
- Add handleNotifyData() dispatching NotifyData_data_schedUpdateResvals
events, iterating xce_resval_list_t and calling cResvalToDistribution
- Add cResvalToDistribution in convert.go with 7 separate switch
cases for Value_u_* union discriminants (no combining i32/i64)
- Add rawResvalData + rawResvalToDistribution pure-Go version
in convert_pure.go for testability without CGO
- Add 10 TDD tests covering all 7 value types, nil val guard,
unknown discriminant, and boolean false
- All 42 backend tests passing
Add four function stubs to backend/stub.go for the !cgo build path:
- StartHeartbeat(ctx context.Context) — no-op (heartbeat not available)
- SetHeartbeatInterval(secs int) — no-op (interval update not available)
- EvalSelectForHost(hostname, selectExpr string) error — returns errNoCGO
- Cleanup() — no-op (no C resources to release without CGO)
TDD: four tests in stub_funcs_test.go verify stubs behave correctly
(no-op functions don't panic, error stubs return errNoCGO). All backend
tests passing.
Routes and RBAC entries already existed from prior P0-2a/2b work. This
adds three TDD tests that lock down the RBAC invariants:
- TestRBAC_HostControl_ClusterAdminOnly: cluster_admin has host:control
with domain=all; basic_user must NOT have host:control
- TestRBAC_HostView_BasicUserHasAccess: basic_user has host:view with
domain=all; queue_admin must NOT have host:view
- TestRBAC_HostControl_DomainTypeIsAll: cluster_admin host:control
domain type must be "all" (not hostgroup)
All apiserver tests passing.
1. Add //go:build !cgo to control_host_test.go so the stub-testing
tests only run in non-CGO builds, matching the stub.go build
constraint. Clean up dead nil check in SignatureCompiles test.
2. Replace two independent if-statements for actionType mapping in
ControlHost with a map lookup + explicit guard, consistent with
ControlQueue's ActionMap pattern. Prevents silent zero-value
actionType if SupportedHostActions expands later.
- backend/clib.go: Replace ControlHost stub with real implementation
using xcecli_hostctrl, following the same pattern as ControlQueue
- controllers/hosts.go: Remove package-level allFlag variable;
preCheckHostControlRequest now returns (bool, error) so the allFlag
is a local value in the caller, eliminating the data race
- controllers/queues.go: Same fix for preCheckQueueControlRequest
- Add unit tests for both preCheck functions verifying return values,
error cases, and concurrent safety
- Add compile-time verification test for ControlHost stub signature
Start from existing entry and apply this-source's fields, rather than
starting from incoming and restoring the other-source's fields. The new
pattern makes it immediately clear which fields each push type WRITES,
without having to reason about which fields are being "restored".
OnHostUpdated keeps the merged := *incoming + if ok guard because the
worker push also populates HostModel/HostType from attrs; config-sourced
values must only win when a prior config push has already set them.
All 37 backend unit tests pass.
Wires the remaining cluster_config_t data into the notification pipeline:
- dispatchConfigPush() extracted as a pure-Go helper (CGO-free, testable)
that drives OnQueueUpdated, OnResourceUpdated, OnHostConfigUpdated, and
OnClusterUpdated from a single config push event
- handleConfigPush() delegates to dispatchConfigPush via the new helper,
eliminating the previous inline loops
- OnHostConfigUpdated and OnClusterUpdated added to NotificationHandler
interface and implemented with partial-merge semantics in DefaultHandler
- rawHostConfigData/rawHostConfigToModel and rawClusterData/rawClusterToModel
added to convert_pure.go with their CGO extraction counterparts in convert.go
Safety fixes from code review:
- OnHostUpdated, OnHostConfigUpdated, OnClusterUpdated now copy *incoming to
a local merged value before mutation, closing the TOCTOU window between
store.Get and store.Put under concurrent pushes
- cClusterConfQueues and cClusterConfResources gain nil-pointer guards
matching the existing guard in cClusterConfHostConfigs
- handleConfigPush gains an explicit gHandler nil check
- cClusterConfToClusterInfo returns nil on empty clustername (prevents phantom
empty-key write to store.Clusters); handleConfigPush logs a warning when nil
- 36 unit tests passing (CGO_ENABLED=0)
