Adds DIRTY_FINGERPRINT = "" to _build_info.py's committed fallback stub
and cli.py's separate ImportError fallback class. New
_compose_version_display() applies the strip-and-append rule via a
genuine anchored removesuffix("-dirty"), mirroring the C/Go
implementations (tasks 3.1/4.4/4.5).
Updates one pre-existing test whose hard-coded literal-GIT_COMMIT
assertion no longer holds once a fingerprint is present, to compute its
expected value via the production function instead -- independently
assessed by review as a legitimate strengthening, not a weakened check.
4 new dedicated unit tests independently guard the transform itself with
hard-coded literal assertions, including an anchored-suffix-not-blind-
substring regression case.
Verified independently by review (including a second, differently-
constructed mutation test) across both install paths via a full real
/xce-build xceadmin cycle: editable install shows "unknown, unknown" with
no import error; wheel built from the dirty tree shows <hash>-<fingerprint>,
never <hash>-dirty-<fingerprint>. 267 passed/3 skipped.
This completes all xceadmin work (tasks 5.1-5.2) for this spec.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Threads dirty_fingerprint through as an 8th positional arg from
xceadmin/meson.build's custom_target into meson-build.sh, which adds
DIRTY_FINGERPRINT to the generated _build_info.py with an independent
empty-string fallback (not "unknown", matching this feature's convention
everywhere else). GIT_COMMIT/BUILD_TIME's existing generation and
"unknown" fallback are completely untouched.
Verified independently by review across three full real build+test+wheel
cycles: dirty tree produces a real, non-empty fingerprint present
identically in the mirrored tree, build/lib copy, an installed venv, and
the packaged wheel, cross-checked byte-for-byte against that same build's
compile_commands.json; explicit-empty fingerprint with real commit/time
resolves DIRTY_FINGERPRINT to genuinely empty; all-empty scenario confirms
the two fallback conventions ("unknown" vs empty) coexist without
interference. 261 passed/3 skipped throughout.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Commits a fallback src/xceadmin/src/xceadmin/_build_info.py (GIT_COMMIT/
BUILD_TIME both "unknown") for install paths that never run meson-build.sh
(e.g. `pip install -e .`), and wires click.version_option() on cli.py's
top-level group. cli.py imports _build_info defensively (try/except
ImportError with an inline fallback) and composes the version string from
importlib.metadata.version("xceadmin") plus both build-info fields.
Verified independently by review: editable install shows "unknown" for
both fields with no import error; the meson-built wheel shows real,
matching commit id + build time; full xceadmin suite 261 passed/3 skipped
(258 baseline + 3 new tests); ruff clean.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
xceadmin/meson.build passes the resolved commit_id/build_time meson
options as two new positional args (matching this custom_target's
existing all-positional style) to meson-build.sh, which writes a small
_build_info.py (GIT_COMMIT/BUILD_TIME, independent per-field "unknown"
fallback) into the mirrored source tree's xceadmin package directory,
before the pip install step -- same before-install ordering as the
existing schema-sync step. A file-existence guard checks the exact path
just written and fails loudly rather than silently proceeding with a
missing/wrong module.
Live-verified via a full real build+test+wheel cycle (run independently
twice, once by implementation and once by review): the mirrored tree's
_build_info.py and the packaged wheel both contain real, matching,
non-"unknown" values (commit id matching git rev-parse --short HEAD plus
dirty suffix, real UTC timestamp); full pytest suite passes (258 passed,
3 skipped -- documented live-HA e2e tests, skip-by-design).
Task 5.1/13 of build-time-versioning.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Three related enhancements to make /xce-deploy-ha's output a
self-contained, directly-usable cluster for manual testing:
- xceadmin now builds an installable wheel (meson-build.sh) with
correct dependencies (click/pycapnp/PyYAML/jsonschema, verified
against actual imports -- pyproject.toml was missing several).
- deploy-ha.sh resolves the deploy environment's own bash
($BASH_BIN, baked into every generated script's shebang -- this
environment's deploy-ha.sh had drifted to #!/bin/sh while still
using bash-only syntax) and generates scripts/start-worker.sh /
scripts/start-scheduler.sh sharing the controllers' --peers, plus
a standalone xceadmin install (wheel extracted directly, resolved
$PYTHONPATH baked into a wrapper script -- nix devShell packages
are $PYTHONPATH entries, not merged into python3's own
site-packages, so a --system-site-packages venv can't see them).
- bug-1566: xceadmin's --controller option had no relationship to a
deployment's actual peers (hardcoded localhost:9991 default) --
every command required an explicit --controller or silently tried
the wrong port. Fixed via a $XCEADMIN_CONTROLLER envvar fallback
(click precedence: explicit flag > envvar > bare default),
exported by deploy-ha.sh's generated scripts/xceadmin wrapper.
Fixed/validated via TDD + live reproduction against a real deployed
cluster in a fully stripped environment.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds `xceadmin config dump CLUSTER_BIN_PATH`, the reverse of `config
build` -- decodes a serialized ClusterConfig back to human-readable text
so a built config can be inspected without a throwaway pycapnp script.
Motivated directly by how bug-1556 (hosts.yaml's max_slot: -1 auto-detect
sentinel silently becoming mxj=0) was actually found: by hand-decoding a
live cluster.bin. The dump renders the same sentinel as
"max_slot=-1 (auto-detect from CPU count)", not the raw uint32.
Also adds parse_size_or_number() to xcecommon.mapping so a queue/host's
sched_stop threshold on a byte-valued resource (maxmem/mem/tmp/maxswap/
maxtmp) can be written as a human-friendly size string ("500MB", "2GB")
instead of a raw byte count; a plain number still passes through
unchanged for non-byte resources like load averages. hosts.schema.json
and queues.schema.json's sched_stop schema gains a matching SizeOrNumber
type. dump_cluster_config() humanizes the same byte-valued thresholds
back on the way out (_format_bytes_human).
New ClusterBinFileError covers every local cluster.bin read/decode
failure mode without letting a raw OSError/capnp.KjException escape the
CLI. RESOURCE_VALTYPE/RESOURCE_ORDTYPE/RESOURCE_FLAG_* made public in
mapping.py so dump_cluster_config can reuse the same int<->name tables
build_cluster_config already uses, keeping both directions in sync by
construction.
256 xceadmin tests pass (incl. new test_config_dump.py and the
parse_size_or_number/SizeOrNumber cases in test_mapping.py/test_cli.py),
verified via `xce-build.sh xceadmin`'s full pinned out-of-tree install
+ pytest run before this commit.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Simplification per review feedback on e3b3ffa: a generic schema-driven
unit field touched the capnp wire schema (2 structs), C structs
(xce_resource_t/xce_resval_t), resobj.c's deep-copy/destroy, opget.c's
reply-build lookup, resources.yaml/resources.schema.json, and mapping.py
-- real cross-cutting cost for a mechanism only one resource (maxmem)
actually needs today.
Reverted all of that. The controller CLI (test.c) now just knows
"maxmem" is bytes-valued via a small explicit is_bytes_valued_resource()
name list, and adaptively picks the best-fit human unit at display time
(format_bytes_human, unchanged) -- same observable behavior (resval/
workerlist render maxmem as e.g. "30.90 GB"), zero wire schema surface.
Regenerated the xceadmin golden fixture back to its pre-unit-field size
(5304 bytes, exactly matching the size right after the mxj-only fix,
confirming a clean, complete removal).
Verified: 1095/1095 controller_unit_test (3 runs; one hit the
pre-existing flaky segfault already logged as bug-1553, unrelated),
228/228 xceadmin pytest, clean rebuild of lib/controller/xceadmin/xce_test.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Three bugs found while diagnosing a live controller log, all in the
worker resource-value path:
1. Every host relying on the documented hosts.yaml auto-detect default
(no max_slot, meaning "use CPU count") got 0 scheduling slots,
permanently blocking the scheduler from placing jobs on it. mxj is
UInt32 on the wire and can't carry the schema's -1 sentinel; mapping.py
worked around this by leaving it unset, which defaults to 0 -- and 0 is
never < 0, so apply_join_state()'s auto-detect fallback never fired.
Fixed by encoding the sentinel as 0xFFFFFFFF, which the controller's
`int mxj` field reinterprets back to -1 via its existing implicit
uint32_t->int conversion. No C-side or wire schema change needed for
this part; the fallback itself was already correct but had zero test
coverage for a negative mxj, now added.
2. update_resvals()/update_resval_list() logged the failure reason via
PERROR, which reads process-global errno -- but update_resval()'s
failure paths return raw negative codes directly and never touch
errno, so the controller log filled with misleading "update_resval:
Success" / "update_resval: Resource temporarily unavailable" lines
instead of the real reason. Fixed to decode the actual rc via
xce_strerror_r and name the failing resource.
3. maxmem is canonically stored/wired as raw bytes but had no unit
metadata, so resval/workerlist printed it as a bare number that read
as garbage (e.g. workerlist's fixed-width columns visually smeared a
multi-GB byte count across the MaxCPU/MaxMem headers). Added an
optional `unit` field to the Resource/ResourceVal capnp structs (and
xce_resource_t/xce_resval_t/resources.yaml) so resval and workerlist
can render a human-readable value (e.g. "30.90 GB") while the stored
value stays raw bytes -- display-only, every other resource unaffected.
Regenerated the xceadmin golden fixture (fixtures/full/expected.bin)
twice: once for the mxj sentinel encoding change, once for the new
Resource.unit field growing every resource's wire size by one pointer
slot. Both diffs verified byte-for-byte isolated to exactly the expected
change before regenerating.
Verified: 1095/1095 controller_unit_test (stable across repeated runs),
229/229 xceadmin pytest, clean rebuild of lib/controller/xceadmin/xce_test.
Two related findings logged to .wolf/buglog.json but deliberately not
fixed here (out of scope per discussion): a pre-existing flaky segfault
in the combined controller_unit_test binary, and maxswap/maxtmp being
hardcoded stub values on the worker side.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- probe_config() now wraps probe in Request envelope matching push_config()
- Controller OPCode_probeConfigTag handler replies through xce_reply()
with redirectHost/redirectPort populated
- follow_redirects works identically for both push and probe flows
Add real CliRunner-through-real-mock-TLS-server coverage for scheduler
record start/stop/status (incl. standby->primary redirect handoff) and
dump, closing the gap task 10.5 left open (which only monkeypatched the
CLI's function bindings). 227/227 xceadmin tests green. Closes Group 10.
Add scheduler command group with nested record sub-group (start/stop/status)
and sibling dump command, delegating to the client functions from 10.3/10.4
with no business logic in the CLI layer. 220/220 xceadmin tests green.
Adds dump() to scheduler.py -- a pure local .replay file decoder, zero
network I/O. Key finding: pycapnp's from_bytes() does not validate a
message against the schema type you ask it to decode as (trial-decoding
SnapshotEntry bytes as ReplayEvent raises nothing, returns plausible
garbage), ruling out trial-decode-and-catch for message-type
discrimination. Instead reads each message's raw segment-table/
root-pointer framing to extract its (dataWordCount, pointerCount) shape,
computed live from the schema, and matches against the four replay
message types' distinct shapes before decoding. AC 20's stream-ordering
rules (msg 1 = ReplayHeader, msg 2 = SnapshotEntry) are enforced
structurally, not inferred.
Adversarial review reproduced a real (if forward-looking) gap: an actual
modified schema with a shape collision caused an uncaught raw capnp
exception to escape dump(). Closed with a pairwise-distinctness
assertion right after the four shapes are computed, raising a typed
ReplayFileError before any message is decoded if a future schema change
ever makes two shapes collide -- restoring dump()'s own docstring
guarantee unconditionally. New regression test simulates the exact
collision the review found.
201 passed, 3 skipped (up from 188 pre-task).
Adds record_start()/record_stop()/record_status() to new
src/xceadmin/src/xceadmin/scheduler.py, following push_config()'s exact
pipeline shape (load_schema -> follow_redirects -> decode_reply). Deliberately
diverges from push_config()'s "return failure as data" convention because
this task's own Observable text requires raising a typed error on an error
reply, not just connection/decode failure -- a new SchedAdminError
(xcecommon/errors.py) carries the full reply state (error/recording/file/
event_count/started_at) when SchedAdminReply.ok is false.
test_scheduler.py mirrors test_config_push_mock.py's real mock-TLS-server
technique, covering all three actions, redirect-following (standby-to-
primary), and the error-reply-raises-SchedAdminError path across the
error codes reference table.
188 passed, 3 skipped via the real xceadmin test runner (meson compile
-C xce.build xceadmin).
bug-1485 (flaky test_live_config_push_against_primary_reaches_success_path,
~24/25 fail rate under pytest, primary process going <defunct> after
promotion) could never be diagnosed because controller stderr was
DEVNULL'd -- no ASAN report or signal was ever captured from a real
failure.
Redirects each node's stderr to deploy_dir/logs/<name>.stderr.log and adds
an XCE_KEEP_DEPLOY_DIR=1 debug toggle to preserve the deploy dir across
fixture cleanup for inspection. Ran the live test 40 times in this
environment (25 idle + 15 under concurrent build contention): 40/40
passed, 0/120 captured stderr logs non-empty -- could not reproduce.
Downgraded to low-priority/environment-flake, left open; the capture
infrastructure stays in place for the next real failure.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LXkenK8rqE8mdS1YKjsq78
Standby-redirect half is done and correct: OP_upgradeConfig has no
server-side redirect wiring today, matches design.md's own documented
"Out of Boundary" gap, and this test locks in the real current
rejection behavior.
Primary-push success-path half is unreliable (~24/25 live fails in one
investigation round, see bug-1485) -- the elected primary was observed
as a <defunct> zombie shortly after promotion, but a dedicated debug
pass could not reproduce it in 26+ clean runs on an idle host and
captured no crash evidence either way. tasks.md marks 6.3 _Blocked:_
pending re-verification on an idle host with real stderr capture.
Deploys a real xce_controller (no HA peers) and runs real xceadmin
config build/push over actual TLS+capnp -- no mock server -- regression
locking task 6.1's envelope fix. Skips cleanly when no controller binary
is available. Surfaced a real, out-of-scope finding: single-node pushes
always report ackedCount==0/exit 1 even on full server-side success,
since there are no standbys to ACK.
config push crashed on every real controller with a capnp KjException --
xce_reply() wraps every reply in an outer Request{body.replymsg} envelope,
but discovery.py/push.py decoded raw wire bytes directly as a bare
RequestReply. Adds a shared decode_reply() unwrap point used by both call
sites, and fixes the same wrong-shape assumption baked into task 5.6's
and test_cli.py's mock-server fixtures.
Cross-reference warnings ("references undefined entry") were genuine
gaps in the example configs, not validator bugs: src/configs/hosts.yaml
had a typo'd resource ref (mg -> mem) and referenced a nonexistent
host3/hostgroup pair; queues.yaml referenced hgroup1/hgroup2/ugroup1
instead of the real hg1/ug1 names; resources.yaml was missing the
r1m/r15s/tmp built-in worker load-index resources
(worker/src/resource_sync.c's init_builtin_load_indices()). Added the
missing host3 host, hg2 hostgroup, ug2 usergroup, and three resource
entries; fixed the typo'd refs.
"schema-valid but has no ClusterConfig destination" warnings for
resources.yaml's type/order/consumable/release fields were a real gap
in xcecommon/mapping.py's _build_resource, not an inherent limitation
-- the encoding (XCE_VAL_*/xce_order_t/XCE_RESF_CONSUMABLE/
XCE_RESF_RELEASE) is documented in include/xce/types.h and actively
read by the scheduler; the old docstring's claim that it was
undocumented was wrong. Only resourcemap remains genuinely unmapped
(its capnp destination fields are commented out).
Updated test_mapping.py/test_config_build.py for the new mapping
behavior and regenerated the full golden fixture's expected.bin
(legitimate representation-drift from the mapping fix, not a bug).
deploy-ha.sh no longer takes a <data-dir> argument or --build-config
flag. Every deploy now generates a fresh self-signed TLS cert/key
(openssl, RSA 2048, 10y validity) directly into the deploy dir's
certs/, and builds cluster.bin directly into controller/ctrl-1/conf/
via xceadmin -- no intermediate staging directory, nothing preserved
across runs. run-ha-soak.sh (/xce-test-ha) updated to match: dropped
its own XCE_HA_DATADIR-based precondition entirely. Updated 4 callers
(run-ha-soak.sh, test-heartbeat-tolerance.sh, test-commit-durability.sh,
both xce-deploy-ha/xce-test-ha SKILL.md docs).
Separately: xcecommon.wire.connect() was loading a client-side TLS
cert, diverging from the real reference client -- netio.c's
create_ssl_context() presents no certificate at all when acting as a
client (cert_file/key_file both NULL, bare TLS_client_method()).
Fixed connect() to match, and since nothing else consumed cert_dir
(verify_mode=CERT_NONE throughout, no CA check either), removed it
end-to-end: discovery.follow_redirects(), push.push_config()/
probe_config(), and the --cert-dir CLI flag.
Server-side cert loading (mock TLS test servers) is unaffected --
moved into a shared session-scoped tls_certs fixture (new
tests/conftest.py, openssl-generated) replacing 3 duplicated
REPO_HA_DATA_DIR/skipif blocks. Net result: those tests no longer skip
under a hermetic nix build sandbox (which never had ha/data/) --
verified 165/165 passed, 0 skipped, via both meson compile and a full
nix build --option sandbox false .#xcecore_debug rebuild (previously
128 passed / 37 skipped there).
ha/data/{xce.crt,xce.key} removed from git tracking. Requirements
2.3/2.4 and 8.3/8.4/8.5 marked superseded in requirements.md with
dated correction notes.
Both meson-build.sh (venv creation) and meson-install.sh (wrapper
shebang) resolved python3 independently at run time (bare `python3 -m
venv` / `command -v python3`) -- correct as long as invoked inside
nix develop/build, but nothing prevented a stray non-nix system
python3 earlier on PATH from shadowing it.
meson.build now resolves python3 once via import('python').
find_installation('python3') -- same mechanism as find_program('go')/
capnp/packcc elsewhere in this build, printed at `meson setup` time
as "Program python3 found: YES (/nix/store/...)" -- and threads that
exact resolved path into both scripts as an explicit argument instead
of a fresh lookup.
Verified: meson setup prints the pinned python3, xceadmin target
rebuilds clean (165/165 passed), and the built venv's own python3
resolves through to that exact nix store path.
xceadmin's custom_target only built+tested (stamp-file output, no
install:true) — nix build .#xcecore succeeded but shipped nothing in
result/bin, unlike every other component.
Add meson.add_install_script('meson-install.sh'): copies the
xceadmin/xcecommon package dirs (not the whole build-dir venv, whose
pip-generated shebang hardcodes a build path that stops existing after
the build) into $out/lib/xceadmin-site, then writes a wrapper at
$out/bin/xceadmin whose shebang and PYTHONPATH are resolved against
the install script's own nix build environment — real /nix/store
paths for python3 and each dependency (pycapnp, pyyaml, jsonschema,
click), so nix's reference scanner keeps them alive in the closure.
No venv activation needed at runtime.
Verified: meson install --destdir and nix build --option sandbox
false .#xcecore both produce a working result/bin/xceadmin, runnable
standalone with a stripped-down PATH-only environment.
Reopens the 2026-07-21 design decision to keep xceadmin outside meson.
Standard onboarding consistency (README 3.3 `nix build .#xcecore` and
3.4 `meson compile` working for xceadmin like every other component)
outweighs the earlier concern about meson's single-artifact model not
fitting a multi-file pip install.
- src/xceadmin/meson.build: custom_target() wrapping install+test,
stamp-file output, build_always_stale (matches this repo's existing
clean-rebuild-every-invocation convention).
- src/xceadmin/meson-build.sh: out-of-tree pinned install + pytest;
stages a repo-mirror/ symlink tree so tests' fixed-relative-path
assumptions (src/configs/, src/schema/, ha/data/) still resolve from
a copied location, without touching their deliberate fail-loud
behavior.
- src/meson.build: subdir('xceadmin') under component != 'xcecli'.
- src/tools/xce-build.sh: xceadmin case now delegates to
`meson compile -C "$BUILD_DIR" xceadmin` instead of its own
pip/venv implementation, like every other component.
Verified both build paths: meson compile (165/165 passed) and
nix build --option sandbox false .#xcecore_debug (128 passed / 37
skipped — cert-dependent tests correctly skip under nix's
git-tracked-only hermetic source). AppImage bundling (README 3.5)
is explicitly deferred to future work, not part of this change.
Adds end-to-end propagation tests through push_config's real
composition with xceadmin.discovery (not just discovery.py's own
unit tests): a 4-mock-server redirect chain proving TooManyRedirectsError
surfaces correctly, and a monkeypatched-timeout test proving
NoPrimaryError does too, without waiting out a real 30s socket
timeout. Also locks in and documents a real wire-contract limitation:
ProbeConfigTagReply carries no rejection signal, so dry-run's
accepted=False path is unreachable today by design, not an oversight.
This completes all 18 sub-tasks in tasks.md.
tests/fixtures/{minimal,full}/configs/*.yaml + checked-in expected.bin
golden files, added to test_config_build.py. Catches representation
drift (bytes changing even when decoded content stays correct) that
the existing structural/decode-based assertions can't detect.
5.1 (mapping) and 5.2 (wire framing) are already fully satisfied by
task 2.3's test_mapping.py and task 2.4's test_wire.py -- no new
tests, would have been pure duplication.
5.3: test_schema_bundling.py cross-checks both bundling mechanisms
(capnp schema, JSON validation schemas) resolve consistently under
the active install, and found a real gap: a corrupted bundled JSON
schema crashed validate_yaml() with a raw json.JSONDecodeError
instead of a clean ValidationError. Fixed in xcecommon/validation.py.
Wire config build/config push --dry-run onto the click group.
Thin layer only: one XceAdminError dispatch surface plus an OSError
catch (ConnectionRefusedError and friends propagate unwrapped from
xcecommon.wire by design and need formatting here), and a
KeyboardInterrupt handler for a clean "cancelled" message (socket
cleanup already happens via push.py's own try/finally).
push_config()/probe_config(): build/send Request{opcode:upgradeConfig}
and the direct-struct ProbeConfigTagRequest respectively, following
redirects to the primary for the former (ProbeConfigTagReply has no
redirect fields, so probe_config connects directly). Maps controller
status/reply-variant failures to typed results/errors. Tested against
a real local TLS mock controller built from the bundled schema, since
neither opcode has a live controller-side handler today (separately
documented, unrelated to this task).
Unblocked mid-task by bug-1461 (commit e53c086): controller.capnp had
a struct-name collision that miscompiled UpgradeConfigRequest.sha256/
.bytes, making this task's core request impossible to construct via
pycapnp until fixed at the schema root.
Generic, opcode-agnostic redirect-following against RequestReply's
redirectHost/redirectPort. Follows up to 3 hops, displaying each
redirect target; a 4th redirect raises TooManyRedirectsError. A
connection timeout to any hop is interpreted as "no primary
available" and raised as NoPrimaryError naming that hop.
config build pipeline: scan the 7 known YAML filenames, validate
each present file, run cross-file business-rule checks, map to
ClusterConfig, serialize. Missing files become empty sections;
schema-valid-but-unmapped fields and undefined references warn to
stderr instead of failing. write_output() handles -o <path>/-o -
and returns the hex SHA-256 digest (printing it is the CLI's job).
TLS connection + 8-byte native-order length-prefixed framing to the
controller, verified byte-for-byte against request.c's own framing
and myapp.c's client TLS posture (SSL_VERIFY_NONE, no CN check).
Opcode-agnostic: moves raw bytes only, so the same send_request()
serves both OP_upgradeConfig and ProbeConfigTag's direct-struct
variant. Connection always closes on error, including handshake
timeout.
Map validated YAML section dicts into ClusterConfig capnp field
values via a declarative SECTION_MAP driving two generic mapper
shapes (list/scalar). Preserves YAML source order, sources no
timestamp/hostname/username, and is proven byte-deterministic
against both synthetic and real src/configs/*.yaml fixtures.
Load controller.capnp once per process via a cached loader that
resolves identically under editable and pinned installs. Missing or
corrupted schema content converts a pycapnp uncaught-C++-abort into a
clean SchemaNotFoundError via isolated subprocess pre-validation.
Validate operator-authored YAML against the 7 bundled JSON schemas,
enforce reserved-name and duplicate-name rejection, and flag undefined
group/resource cross-references as non-blocking warnings.
Add python3 + pycapnp/pyyaml/jsonschema/click/pytest/ruff (+pip) to the
nix dev shell, wire a new `xceadmin` case into xce-build.sh (schema
sync from src/schema/ and src/configs/schema/, pip install by profile,
pytest), package-data config so bundled schemas survive a non-editable
install, xce-build SKILL.md docs, and ruff format/check hooks matching
this repo's stdin-JSON hook convention (not brief.md's env-var sketch,
which would have silently no-op'd).
Verified live end-to-end inside `nix develop ./src` for both the
default (editable) and release (pinned) profiles; found and fixed 3
real bugs along the way (missing pip, PEP 668 externally-managed-
environment, missing package-data for release-profile bundling) —
logged as bug-1458/1459/1460.
Requirements: 5.5, 8.1, 8.2, 8.6
Editable-installable xceadmin package with a real click-group entry
point (zero subcommands yet) and xcecommon as an independently
importable standalone package.
Requirements: 5.4
