Violates this project's own recorded Decision Log entry: "No client
reply-wait timeout as a fix for a hung request -- fail loud at the real
transport/source instead of masking with a deadline backstop."
OPCode_schedAdmin (cluster.c) and on_fetchfile (job.c, the worker proxy
-- cluster.c's own comment says schedAdmin "mirrors on_fetchfile's proxy
pattern", confirming one shared design mistake, not two independent
bugs) both blocked on a multi-second pthread_cond_timedwait, replying
"timeout" on expiry. handle_scheduler_leave()/handle_worker_leave() (the
actual disconnect handlers) only nulled the endpoint pointer -- neither
ever signaled the pending waiter, so a mid-wait disconnect was invisible
until the deadline lapsed. The timeout was the ONLY failure-detection
mechanism, exactly what the decision forbids.
Both sites already had a working signal function on their success path
(schedadmin_signal(), fetchfile_signal()) -- just never wired to the
disconnect handlers. Fixed by calling them from
handle_scheduler_leave()/handle_worker_leave() with a distinguishable
-ECONNRESET outcome, so the waiter wakes immediately on disconnect
instead of only on the deadline. Timeouts kept as defensive backstops
for a genuinely wedged peer that never disconnects cleanly either --
this fix is about not relying SOLELY on the timeout, not removing it.
schedadmin_signal_disconnect() must be called BEFORE handle_scheduler_leave()
acquires c->sched.lock -- the dispatch wait holds that same lock for its
entire duration, so signaling after acquiring it would deadlock.
Found by an /xce-audit-invariants controller pass (Decision Log fidelity
dimension). New test_fetchfile_disconnect.c plus extensions to
test_sched_admin_dispatch.c/test_sched_worker_change.c; RED/GREEN
independently verified against real elapsed-time assertions (pre-fix:
5001ms full-timeout wait; post-fix: <1s immediate wake). Full controller
suite: 1181 tests, 2 failures -- both the pre-existing, unrelated
bug-1561 overlayfs sandbox flake, confirmed via a clean meson-driven run.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
Last of the five field-parity gaps from the original audit (bug-1678,
bug-1687, bug-1689, bug-1690, bug-1691). set_preason()/clear_preason()
set job.pend_reasons (host/resource-based pending-job explanations), but
persist_job_hook_fun's default: arm only ever captured {jobid, state}.
Neither apply seam restored pend_reasons after a restart.
Reuses the ALREADY-EXISTING JobPendReason/HostBasedReason/ResourceBasedReason
capnp structs -- no schema change needed, unlike bug-1690's WAL_JOB_RUSAGE.
Safety-checked against bug-1690's lesson (RTTI/makeString()-backed fields
need merge-not-replace, not free-and-replace): pend_reasons is plain
malloc/strdup-backed throughout (erase_job_preason is FREEUP()-only,
add_host_preason/add_res_preason use strdup()/calloc()), so a
straightforward free-and-replace is safe here, matching bug-1678/1687's
pattern instead.
New wrinkle beyond the four prior fixes: pend_reasons has a genuine CLEAR
operation, and "trailing bytes present or absent" can't distinguish a
legitimate clear from an old-format payload -- added an explicit presence
byte (0=cleared/adopt NULL, 1=capnp bytes follow), verified by two
dedicated "clear survives restart" tests.
11 new tests in test_wal_job_preason_fact.c; RED/GREEN independently
verified (7 genuine pre-fix failures, one test's own wrong premise about
capnp's garbage-byte behavior caught and corrected during RED/GREEN
iteration). Full controller suite: 1178 tests, 2 failures -- both the
pre-existing, unrelated bug-1561 overlayfs sandbox flake. No ASAN findings.
This closes the field-complete apply parity invariant class the
xce-audit-invariants controller dimension 7 was added for.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
Same class as bug-1678/1687/1689/1690: on_job_ckpt() sets job.ckptinfo
(a plain char*, xstring-backed via makeString()) but is purely hook-driven
-- persist_job_hook_fun's default: arm only ever captured {jobid, state}
for WAL_JOB_CKPT. Neither apply seam restored ckptinfo after a restart.
Simplest of the five field-parity fixes: ckptinfo is a bare string, so no
capnp struct is needed -- mirrors WAL_QUEUE_CTRL's existing NUL-terminated-
string-after-header wire shape instead. Adoption is unconditional (not
gated on a state transition), matching bug-1690's precedent: a checkpoint
report never changes job.state. restore_job_ckpt_state() releases the
prior value via dereference() (the correct RTTI verb for an xstring), not
free().
Found by an /xce-audit-invariants controller pass (field-complete apply
parity dimension) -- the last of five sibling gaps found together
(bug-1678, bug-1687, bug-1689, bug-1690, this one). 7 new tests in
test_wal_job_ckpt_fact.c; RED/GREEN independently verified (5 genuine
pre-fix failures, 2 backward-compat tests correctly passed unchanged).
Full controller suite: 1167 tests, 2 failures -- both the pre-existing,
unrelated bug-1561 overlayfs sandbox flake. No ASAN findings.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
Same class as bug-1678/1687/1689: the WAL fact for WAL_JOB_RUSAGE only
carried {jobid, state}, so job.run_usage (client-reported per-host
CPU/mem usage) was never restored on either apply seam after a restart.
Unlike the prior three, xce_job_runusage_t/xce_host_runusage_t had no
existing Cap'n Proto mapping -- a genuine new schema addition
(HostRunusage/JobRunusage in controller.capnp, mirroring JobPendReason's
List(NestedStruct)+$C.maplistcount style), verified against the real
struct definitions in types.h, codegen confirmed via nm on the built
binary rather than assumed.
Two deliberate deviations from the established precedent, found by
reading the real code rather than copying the pattern blindly:
1. Adoption is unconditional, not gated on a state transition -- a
rusage report almost never changes job.state (repeat reports keep
state at RUN), so gating on JOB_TRANSITION_APPLIED like START/FINISH/
DISPATCH do would make the fix dead code for the realistic case.
2. Merge, not free-and-replace. update_host_runusage() builds run_usage
with host_name sourced from makeString() -- an RTTI-managed pointer,
not malloc() -- and the primary's own live apply pump re-applies every
fact it just wrote. A naive free_JobRunusage_ptr()-then-adopt (matching
the prior three fixes exactly) would free() a non-malloc'd pointer on
the very first live rusage report for a new host -- guaranteed heap
corruption. Fixed with merge_job_runusage(): existing hosts get
scalar-only in-place updates (host_name pointer never touched), only
genuinely new hosts adopt their freshly-decoded (safe, malloc'd)
host_name. Proved via a real makeString()-backed test asserting
pointer identity survives, not just value equality. job_destroy()
(src/lib/jobj.c) was found to have this identical latent mismatch,
pre-existing and independent of this fix -- flagged, not fixed here.
Found by an /xce-audit-invariants controller pass (field-complete apply
parity dimension). 8 new tests in test_wal_job_rusage_fact.c; RED/GREEN
independently verified. Full controller suite: 1160 tests, 2 failures --
both the pre-existing, unrelated bug-1561 overlayfs sandbox flake. No
ASAN/heap-corruption findings. Backward compatibility confirmed for
old-format bare-payload entries.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
Same class as bug-1678/bug-1687: record_job_finish_fact() wrote only
{jobid, state} for WAL_JOB_FINISH. Both apply seams either fabricated
finish_time via time(NULL) or touched nothing beyond state.
Worse than "lost on restart": apply_job_finish_transition() -- the only
function that ever set job.exit_info -- is dead code on the real
production apply path. The raft-apply-decoupling redesign routes actual
mutation through the leaner apply_job_update_transition() instead, so
exit_info was never populated at all, restart or not, before this fix.
job_exitinfo_t ({int exitcode;}) has no existing capnp mapping, so this
uses a small native (non-capnp) trailing payload -- wal_jobstate_t header
+ uint64_t finish_time + int32_t exit_code -- mirroring wal_jobstate_t's
own native-struct style rather than inventing a capnp wrapper for one
field. run_time is never carried on the wire, always re-derived as
finish_time - start_time at apply time. Both apply seams updated;
old-format payloads (exactly sizeof(wal_jobstate_t)) decode unchanged
(fabricated finish_time, NULL exit_info) -- full backward compatibility.
Found by an /xce-audit-invariants controller pass (field-complete apply
parity dimension). 6 new tests in test_wal_job_finish_fact.c; RED/GREEN
independently verified (4 genuine pre-fix failures with real
expected-vs-fabricated mismatches, 2 backward-compat tests correctly
passed both before and after). Full controller suite: 1152 tests, 2
failures -- both the pre-existing, unrelated bug-1561 overlayfs sandbox
flake (confirmed flaky across repeated re-runs of the same binary).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
Same class as bug-1678: apply_job_start_transition() sets the real
job->job.pidinfo (worker-reported PIDs/PGIDs/exdata) and start_time, but
the WAL fact for WAL_JOB_START only carried the shared wal_jobstate_t
{jobid, state} header -- both apply seams (apply_committed_entry() for
primary boot replay, apply_wal_entry() for standby catch-up) restored
state only. pidinfo stayed permanently NULL after a restart; start_time
was fabricated with time(NULL) at replay instead of being carried,
drifting from the true value.
Mirrors bug-1678's exact fix shape: capnp_encode_pidinfo()/decode_pidinfo()
(persist.c, using the pre-existing JobPIDInfo capnp struct -- no schema
change needed) serialize job_pidinfo_t into the WAL payload, trailing a
new uint64_t start_time field appended after wal_jobstate_t.
persist_submit_job_start_fact() replaces the old state-only
persist_submit_job_fact() call for this type. Both apply seams updated;
a payload of exactly sizeof(wal_jobstate_t) (any entry written before
this fix) decodes with pidinfo left NULL and start_time fabricated via
time(NULL), exactly matching pre-fix behavior -- full backward
compatibility, verified by every pre-existing WAL_JOB_START test using
the old bare-struct shape.
Also fixed a genuine, unrelated deadlock this change's larger payload
exposed in test_commit_barrier_reply.c: cbrp_count_jobstate_entries_ex()
matched WAL entries by exact payload size (==), so once WAL_JOB_START
legitimately grew it silently undercounted to 0 and a downstream test
spun forever polling an uncounted target. Fixed the match to >= (jobid/
state always live at a fixed leading offset) -- bisected via /proc/*/wchan
futex inspection (no ptrace in this sandbox), confirmed as the actual
cause, not the teardown-ordering red herring first suspected.
Found by an /xce-audit-invariants controller pass (field-complete apply
parity dimension, added after bug-1678). 6 new tests in
test_wal_job_start_fact.c; RED/GREEN independently verified (4 tests
genuinely failed pre-fix with exact expected-vs-fabricated value
mismatches, 2 backward-compat tests correctly passed both before and
after). Full controller suite: 1146 tests, 2 failures -- both the
pre-existing, unrelated bug-1561 overlayfs sandbox flake.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
User-reported live crash: xce_scheduler SIGSEGV in fcfs_cursor_enter_queue
(builtin_fcfs.c), called from builtin_fcfs_next_job <- sched_job_picker
(picker thread).
priv->cursor/priv->job_cursor (fcfs_plugin_data_t) are raw ordq_item_t*
pointers that persist across SEPARATE next_job() calls, each with its own
independent priv->lock acquisition/release. The existing mutual-exclusion
fix (task 2.4) correctly protects the cursor walk from corruption DURING
one locked call, but does nothing to stop a LATER call from dereferencing
a node a properly-locked, INTERVENING call already freed.
on_queue_update()'s re-sort (remove old ordq_item_t node, insert a fresh
one via ordq_put) is exactly such a free -- with only one queue in the
deployment, the picker's cursor is essentially always parked on it
between calls (sched_queue_is_ready/sched_job_is_ready are unconditional
true stubs today, so the cursor never advances away while jobs remain),
making a queue config update land in that window trivially reachable.
Fixed by invalidating (NULLing) whichever cursor points at a node right
before that node is freed, at all three sites that can free a node the
cursors might reference: on_queue_update's reuse-and-resort path
(priv->cursor + priv->job_cursor in lockstep), builtin_fcfs_on_job_state_change's
!JOB_IS_PEND removal, and fcfs_remove_job_everywhere's cross-queue removal
loop (both job_cursor only, via an ordq_peek-then-invalidate-then-delete
pattern). Always safe: next_job() treats a NULL cursor as "no more
candidates this round", and begin_session() resets both cursors fresh
every round regardless -- worst case is a bounded one-round delay, never
a crash or a permanently lost job.
New test_builtin_fcfs_cursor_uaf.c reproduces the bug fully single-threaded
(next_job() releases the lock between calls, so no real concurrency is
needed to hit the window). RED-phase independently confirmed a real ASAN
heap-use-after-free with the exact same call chain as the live crash
(freed by on_queue_update, read by next_job()); GREEN confirms 0 failures
and no job permanently lost across the invalidation.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
User-reported live crash: xce_scheduler SIGABRT via glibc malloc_printerr
(heap corruption) inside kill_limit(), called from limit_update_config()
during a live config reload.
limit_update_config() called kill_limit(limit) in its error path after a
failed key_add(privdata->limits, ...). But privdata->limits is a kvmgr
created with .datakiller = kill_limit, so on a kvtab-level failure (e.g.
-EEXIST for a duplicate limit name -- exactly the rc=-17 captured in the
crash's own backtrace), xkvmgr_add() already rolls back via vclear() ->
xzarray_clear(), which fires kill_limit(limit) once automatically. The
caller's explicit second call was a double free.
Removed the redundant call; the kvmgr's own configured datakiller already
owns cleanup on this failure path (mirrors the ownership asymmetry
job.c's restore_job_array() already documents for the opposite case,
where its kvmgr has no datakiller configured and the caller must free
failed items itself). One accepted, documented residual gap: a vstore()-
level OOM failure (never reaching the kvtab step) would leak `limit`
instead -- vanishingly rare, and a leak is strictly better than the
guaranteed crash on the common duplicate-name case; xkvmgr_add's return
code doesn't distinguish which sub-case occurred, so there's no clean way
to free conditionally without a kvmgr API change (out of scope).
New test_limit_plugin.c (this plugin had zero test coverage before) --
RED-phase independently reproduced a genuine ASAN heap-use-after-free
matching the live crash's exact call chain; GREEN confirms 0 failures.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
ha_persist_term() had a void return -- every open/write/fsync/rename
failure was silently swallowed ("best-effort; caller must not rely on
this for correctness"). Its sole vote-granting caller, raft_cb_persist(),
always returned 0 regardless, so the raft library always granted the
vote even when the term/voted_for record never reached disk -- a real
split-vote risk if the node then restarted and forgot it voted
(Election Safety requires durably-persisted votedFor).
ha_persist_term() now returns 0 on success (including the deliberate
NULL-workdir test-mode skip) or -errno on a genuine I/O failure
(fsync's previously-unchecked return is now checked too). raft_cb_persist()
propagates that failure to the raft library (denying the vote per its
own documented contract) and rolls back ha->voted_for_term/
ha->voted_for_name to their pre-call snapshot, so the adapter's
in-memory state stays consistent with the library's own "deny without
updating voted_for" behavior. ha->term is deliberately NOT rolled back:
the raft library adopts a higher observed term unconditionally at Step 2
of raft_on_vote_request, before and independent of the vote-grant/persist
outcome, so the adapter correctly mirrors that same semantics.
Also corrects a stale claim in controller/CLAUDE.md's Protocol
Verification Checklist (found by a sibling audit dimension the same
session): term+voted_for were never written "atomically under ha->lock"
-- term uses its own atomic store outside the lock.
Found by an /xce-audit-invariants controller pass (error-handling
dimension). 3 new tests in test_ha_durability.c drive the real
production path (ha_init_raft + raft_on_vote_request, the exact
function cluster.c's dispatch calls) against a forced ENOENT write
failure; RED/GREEN independently verified.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
sim_loop.c never called plugin_begin_session()/plugin_end_session() at
its round boundary, unlike driver.c's normal-mode round -- a driver-
equivalence gap found by an /xce-audit-invariants scheduler pass.
Currently inert (sim mode's only reachable picker, builtin_fcfs, leaves
both hooks NULL) but structurally identical to bug-1613's class of bug.
Relocated plugin_begin_session()/plugin_end_session() from an implicit
xce_scheduler_t* to xce_sched_core_t* directly (mirroring
sched_account_jobs()'s prior relocation) -- their bodies never touched
anything beyond core->plugins, so driver.c's comment claiming they
"needed the full xce_scheduler_t*" was itself stale. sim_loop.c now
calls both, same relative position as driver.c. A full-tree grep (done
after the first build attempt failed on an untouched file) turned up a
third live call site in scheduler.c's legacy sched_begin_session()/
sched_end_session(), plus four testsuite files with their own stub
definitions of the same functions -- all updated to match the new
signature.
Extended test_sim_session_ordering.c's existing bug-1613 regression
tests with new plugin_begin_session()/plugin_end_session() spies
(call-count + session_active-window proof, same technique as the
existing sched_account_jobs spy). RED/GREEN independently verified:
temporarily disabled the two new call sites, confirmed both new
assertions fail (Expected 2 Was 0 / Expected 1 Was 0), restored,
reconfirmed green. Full scheduler suite: 51/52 green, the one failure
is the pre-existing unrelated bug-1560 sandbox flake.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
FilterRows routed ANY condition on job_status/host_status through
MatchesBitmaskCondition based purely on the field name, regardless of
the condition's actual operator. MatchesBitmaskCondition only
implements OpEQ/OpNE (the only two shapes buildIntCondition's in/notin
bitmask branch ever produces) and silently returns false for anything
else -- so xcecli's `-a` flag, which builds `{job_status:notnull:}`
(Operator: OpNOTNULL), matched zero rows unconditionally. `xcecli jobs
list -a` showed "no job found" even when jobs genuinely existed and
were correctly queryable through every other view.
FilterRows now requires the operator to actually be OpEQ/OpNE before
taking the bitmask path; any other operator on these fields correctly
falls through to the generic MatchesCondition evaluator, which already
implements OpNOTNULL/OpISNULL correctly -- no changes needed to either
evaluator itself, only the dispatch condition.
New query_test.go (no test file existed for this package before):
TestFilterRows_JobStatusNotNull_MatchesRealRows reproduces the bug
(independently confirmed RED: 0 of 3 rows matched) and
TestFilterRows_JobStatusBitmaskEQ_StillWorks locks in that the actual
bitmask shape used by every other status flag is unaffected. Live-
verified: `xcecli jobs list -a` now correctly shows jobs across every
status, immediately, no restart needed.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
New test_dc_success_notifies_job_update_hook_exactly_once
(test_dispatch_commit.c): a spy hook counting HOOK_AFTER_EVENT/
HOOK_DETAIL_JOB_UPDATE fires specifically -- the exact hook
apiserver_job_update_fun subscribes to in production. Asserts exactly
one fire per successful live dispatch.
Independently reproduced RED->GREEN: disabled the new notify call
with the test kept, rebuilt, confirmed FAIL (Expected 1 Was 0);
restored, rebuilt, confirmed PASS.
Also independently confirmed no double-WAL-append regression via two
existing tests whose fixtures genuinely wire persist.cluster with
persist_job_hook_fun registered: test_jobdispatch_receipt_ack_no_wal_append
(asserts exactly one WAL entry for a successful dispatch) and
test_handle_jobdispatch_matches_dispatch_a_job_notify_count -- both
pass unchanged. Full controller_unit_test: 1137/1137 (2 pre-existing
test_config_repl.c failures, confirmed identical on stock code via
git-stash -- the known overlayfs fdatasync errno=5 flake, bug-1561).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
dispatch_a_job_() mutates job.state/job.allocs directly then persists,
firing no hooks at all. apply_committed_entry()'s later apply of that
same WAL_JOB_DISPATCH entry sees state already matches the value it
just set moments earlier (under the same lock) and reports
JOB_TRANSITION_NOOP_DUPLICATE, silently skipping its own would-be
notify. Result: the apiserver is never told a job reached RUN -- xcecli
jobs list shows it stuck at PEND forever, no restart involved.
New persist_notify_job_updated_already_persisted(cluster_t*, job_t*)
(persist.c/persist.h), called from dispatch_a_job_()'s success branch
right after unlock(j). Mirrors apply_committed_entry()'s own identical
Hazard-1-guarded hook fire exactly -- same t_apply_seam_notifying
guard, same hook (HOOK_DETAIL_JOB_UPDATE's AFTER_EVENT), same detail --
without which persist_job_hook_fun (also subscribed to this hook)
would redundantly re-append the transition as a second, duplicate
WAL_JOB_UPDATE entry. The flag stays file-private to persist.c; this
is job.c's only sanctioned way to reach it.
record_job_start_fact()/record_job_finish_fact() needed no change --
their durable-append-only pattern (defer mutation+notify to
apply_committed_entry entirely) is already correct; only
dispatch_a_job_()'s broken hybrid (direct mutation, no notify at all)
was ever the problem.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
test_dispatch_commit.c's test_dc_success_appends_wal_job_dispatch_durably
(already drove the real dispatch_a_job_() production path through a
real WAL-write + persist_recover() restart cycle, previously only
checking recovered state) now also asserts the recovered job.allocs
matches what was dispatched -- host, resource name, value. This is
the primary regression test for the user's exact acceptance
criterion: "after recover the job should get the same as it's state
before shutdown."
Independently reproduced RED->GREEN (not just narrated): reverted the
production fix with the test extension kept, rebuilt, confirmed FAIL
at exactly this assertion; restored, rebuilt, confirmed PASS.
test_wal_job_dispatch_fact.c: added 3 new tests exercising the richer
payload directly on both apply_committed_entry and apply_wal_entry,
plus a full restart-replay variant. All 3 pre-existing tests (bare
wal_jobstate_t payloads, no trailing bytes) pass completely unchanged,
proving backward compatibility with any WAL_JOB_DISPATCH entry written
before this fix.
Full controller_unit_test suite independently re-run: 1136/1136 pass,
zero regressions.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
dispatch_a_job_() set j->job.allocs in memory at dispatch-commit time
but only ever persisted {jobid, state} via persist_submit_job_fact() --
the allocation itself was never written to the WAL. On a full restart,
job.state correctly recovered to RUN (both WAL_JOB_DISPATCH and the
later WAL_JOB_START fact carry state=RUN) but job.allocs stayed
permanently NULL, since apply_job_update_transition() only ever
touches state. EXEC_HOST displayed blank forever for a job that was
genuinely running before shutdown.
No capnp schema change needed -- JobAlloc (xce_job_alloc_t) was
already a full top-level struct (the existing Job.allocs field) with
generated encode/decode functions already in the build. New:
capnp_encode_joballoc()/decode_joballoc() (persist.c, mirroring the
existing capnp_encode_worker()/restore_job() patterns) and
persist_submit_job_dispatch_fact() -- WAL_JOB_DISPATCH's payload is
now a wal_jobstate_t header plus trailing capnp-encoded JobAlloc
bytes. dispatch_a_job_() now persists j->job.allocs (the canonical,
freshly-constructed struct, read under the same write lock) instead
of just the state.
Both apply seams updated: apply_committed_entry() (primary's own boot
replay) gets one added branch in its existing WAL_JOB_START/FINISH
stamp-chain; apply_wal_entry() (standby catch-up / replicated-apply --
also required, a promoted standby would hit the identical bug) has
WAL_JOB_DISPATCH split into its own case, calling new
restore_job_dispatch_state(). A payload of exactly sizeof(wal_jobstate_t)
(any entry written before this fix) decodes no allocation and behaves
exactly as before -- full backward compatibility.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
modelJobToSubmit/freeJobSubmit (submit direction) and
cJobToModel/cJobArrayToModels (receive direction, both single-job and
array-job paths) now carry from_host across the CGO boundary.
rawSubmitData/rawJobToModel (the pure-Go, CGO-free mapping layer) gain
the field too, completing the round-trip so JobInfo.FromHost reflects
whatever the controller actually has -- which, as of the prior two
commits, is now always the client-asserted hostname. backend/handler.go
needs no change: its existing blind overwrite in OnJobUpdated is
correct by construction once every controller push genuinely carries
the right value.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
- src/schema/controller.capnp: JobSubmitData gains
fromHost @10: Text $C.mapname("from_host") -- auto-regenerates
controller.capnp.c/h via the existing meson capnpc-c custom_target.
- src/include/xce/types.h: job_submit_data_t gains char* from_host.
- src/lib/jobj.c: jobsub_init/jobsub_destroy (the hand-written,
ref-counted, content-deduped job-submit interning object -- not
auto-generated) thread from_host through the deep-copy, the dedup
identity comparison, and the destroy path.
Closes the wire-format half of the round-trip: from_host now survives
from the apiserver's submission all the way through the controller and
back on every subsequent job-state push, and rides along for free in
the existing WAL_JOB_SUBMIT persistence across a controller restart.
Did not need to touch job.c's build_job_submit_payloads() (bare
pointer borrow of the already-decoded submit struct) or any WAL
apply-path code (capnp_encode_job/decode_Job already generically
handle the whole xce_job_t including its full .submit sub-struct).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
CreateJob now does FromHost: req.FromHost, a straight passthrough of
whatever xcecli (or any other client) sends in JobSubmitRequest.FromHost,
instead of deriving it server-side via ctx.ClientIP().
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
JobSubmitRequest gains a FromHost field, populated in BuildJobRequest()
via os.Hostname(). Matches how traditional batch schedulers report the
submitting host, and sidesteps having the server derive it from the
connection (which apiserver was doing via ctx.ClientIP() -- an IP not
a hostname, and spoofable via X-Forwarded-For since this apiserver
never configures gin's TrustedProxies).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
OnHostConfigUpdated only applied config-sourced fields (MaxSlot,
HostModel, HostType, DisptWindow) onto a host whose name exact-matched
an entry already in the store. hosts.yaml commonly defines only a
wildcard "default" entry, so a dynamically-joined worker never
received its own config push and MaxSlot stayed at Go's zero-value
forever -- decoupled from the C-side scheduling path, which already
resolves the real value via worker.c's wildcard fallback.
The "default" pseudo-host's config is now cached and retroactively
backfilled onto any registered host with no explicit config of its
own, in either arrival order (config-before-worker or
worker-before-config). The -1 HOSTCONFIG_MXJ_AUTO_DETECT sentinel
(bug-1556) is resolved to the host's real NumCPUs when applied via
fallback, mirroring worker.c's own resolution, so the display shows
usable capacity rather than a bare -1.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
GetJobsInfo/GetJobByIDs validated the -o/-l field list against
models.JobSubmitRequest{} -- the job-submission payload -- instead of
models.JobInfo{}, the query/response model (the already-correct
pattern used elsewhere in this file at line 1131). Response-only
fields like pending_reason don't exist on JobSubmitRequest, so any
such field made the whole listing fail outright with "unsupported
query field", not just omit that column.
core_limit/mem_limit exist on JobSubmitRequest but not on JobInfo --
switching wholesale would have newly broken those two previously-valid
fields. Added CoreLimit/MemLimit to JobAdditionalFields, the existing
merge-in bucket already used for pids/pgids/interactive_job_url.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
ExtractErrorMessage()'s connection-refused branch returned the bare
OS error string verbatim. A CLI call right after apiserver startup
(before its listener is up) surfaced a raw "get the request failed:
[connection refused]" with no indication it's a transient startup
race, not a real failure.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AgYRU3zDTqNGV5Jk8aiKLg
Fixes test_commit_barrier_reply.c's test_jobdispatch_receipt_ack_no_wal_append
(owned by ha-commit-barrier-rollout), the last remaining assertion this
feature's earlier tasks left stale:
- WAL-count delta corrected from "must be zero" to lsn_before + 1 -- the
batch's successful dispatch now appends one WAL_JOB_DISPATCH fact
(task 3.1); mark_job_fail() was traced and confirmed to append
nothing via any path.
- The batch's terminal-failure job was replaced with a genuinely
retryable one (WORKER_NULL site, unregistered host, new job id)
rather than degrading the notify-count assertion to zero, which
would also have silently killed the test's own reply-before-notify
ordering pin (nothing left to order against). This keeps the test
meaningfully exercising notify_dispatch()'s wiring through
handle_jobdispatch().
Full regression, independently re-verified by review:
- Scheduler suite at documented baseline (51/52, 1 pre-existing
unrelated failure). Investigated and logged bug-1632, a new sibling
of the already-known bug-1598 stack-lifetime pattern in a different
test file -- confirmed pre-existing, untouched by this feature, and
non-deterministic.
- Controller suite clean: 1133 tests, only the 2 pre-existing bug-1561
failures.
- Sequential HA soak: PASS (10 rounds, 36 jobs, zero loss, all 3 nodes
led).
- Chaotic HA soak: PASS (10 rounds, committed_divergence=0
committed_job_loss=0).
This completes the scheduler-dispatch-commit spec: bug-1624
(resource-in-use round-boundary loss) and bug-1625 (scheduler discards
dispatch-failure notify) are both fixed and regression-tested.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Cxa1PmqAB5PyXfJaNvj8TN
Adds test_handle_jobdispatch_terminal_no_notify_no_leak to
test_jobdispatch_no_double_notify.c, closing a gap neither existing
test fully covered: test_dispatch_fail_terminal.c (task 3.2) bypasses
handle_jobdispatch() entirely via dispatch_a_job_test(), so it can't
exercise the double-notify race at all; test_jobdispatch_no_double_notify.c
(task 4.1) only proves an aggregate 3-job-batch notify count, not a
direct per-job zero-notify proof.
The new test drives a single terminal-classified job through the real
handle_jobdispatch() entry point and asserts, in one run: JOB_STAT_EXIT
with allocs left NULL, a direct (non-aggregate) zero-count read from
the notify-capture spy proving no jobDispatchFail was produced for this
job, and (via task 3.2's canary-reference technique, armed before the
call under test) no reference over-release.
Test-only; job.c/handler.c are untouched. RED phase verified via an
actual revert-rebuild-rerun of handle_jobdispatch() to its pre-task-4.1
shape. Independently reviewed and approved -- the reviewer notably
declined to trust a relayed build report and re-ran verification
first-hand before approving.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Cxa1PmqAB5PyXfJaNvj8TN
Adds test_rpc_failure_bound_resets_after_intervening_success to
test_dispatch_fail_retry.c, proving Requirement 4.3's literal claim
end-to-end through the real dispatch_a_job_test() entry point: a fail,
then a real success, then another fail resets the consecutive-failure
counter so the second failure is evaluated as failure #1, not #2.
The first draft of this test also asserted job.state/job.allocs revert
to PEND/NULL on that post-success failure -- this genuinely fails
against current code (none of dispatch_a_job_()'s four retryable
branches revert state/allocs when failing from an already-RUN job,
since they were only ever designed for a job whose every attempt starts
from PEND). A debug investigation, independently re-verified even more
exhaustively during review (full trace of every pendJobs-reinsertion
and controller-side state-mutation site), confirmed this scenario is
unreachable via any real caller today -- the scheduler's picker
permanently removes a job from its PEND pool the instant it dispatches
it, and nothing already-implemented ever re-adds a RUN job to it. Only
the not-yet-implemented scheduler-preemption spec could someday create
that path. Logged as bug-1631, deliberately deferred rather than fixed
now (no reachable caller to regression-test against); the two
over-reaching assertions were trimmed, keeping only the counter proof
Requirement 4.3 actually asks for. Independently reviewed and approved.
Scenarios 1 (retryable -> PEND-eligible) and 2 (bound exceeded -> EXIT)
were already fully covered by tasks 2.2's and 3.3's existing tests.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Cxa1PmqAB5PyXfJaNvj8TN
Extends task 2.1's test_scheduler_dispatch_commit.c with two tests
proving resource-in-use accounting survives more than a single round
boundary between dispatch and worker confirmation, per task 5.1's
"several rounds" / "matching a same-round confirmation" language:
- test_dispatch_commit_survives_several_rounds_before_confirmation:
loops 5 round-boundary cycles, asserting resInUse after EVERY round,
not just once.
- test_dispatch_commit_multi_round_gap_matches_same_round_confirmation:
compares resInUse after 1 round vs after 5 rounds and asserts
equality -- a same-round confirmation is modeled as nrounds==1 since
design.md documents re-applying JOB_STAT_RUN to an already-RUN job as
a confirmed no-op, so resInUse depends only on job->state, never on
confirmation timing.
Test-only; scheduler.c is untouched. RED phase independently verified
by both implementer and reviewer via an actual revert-rebuild-rerun
cycle (4/5 tests fail without the task 2.1 fix). Independently reviewed
and approved.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Cxa1PmqAB5PyXfJaNvj8TN
dispatch_a_job_() (tasks 3.1-3.3) now owns notification entirely for
every outcome -- notify_dispatch() on a retryable failure, mark_job_fail()'s
own hook chain on a terminal failure, nothing on success. handle_jobdispatch()'s
loop still unconditionally called notify_dispatch() itself for every job
regardless, producing two conflicting outcome reports for any failed
dispatch. Removed that caller-side call; the loop is now a thin
dispatch-and-free loop with no notification logic of its own.
New test_jobdispatch_no_double_notify.c drives a 3-job batch (success,
retryable, terminal) through handle_jobdispatch() and confirms exactly
one notification fires (from the retryable job only), not four.
Independently reviewed and approved. Confirmed handle_jobdispatch()'s
sole caller never depended on its notification behavior (always returns
0 unconditionally). Flagged that test_commit_barrier_reply.c's
test_jobdispatch_receipt_ack_no_wal_append is now stale for a second,
independent reason (notify count, not just WAL count) -- both left for
task 5.4 per Requirement 5.3.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Cxa1PmqAB5PyXfJaNvj8TN
The four retryable-classified failure sites in dispatch_a_job_() (worker
lookup, worker null, worker not ready, RPC failure) now resolve instead
of just returning an error code: lock(j, RTTI_LOCK_WRITE) -> genuinely
classify via xce_classify_dispatch_fail() -> increment dispatch_fail_count
-> within XCE_DISPATCH_FAIL_RETRY_BOUND (3) resolves retryable (nothing
further under the lock), past it resolves terminal via mark_job_fail()
exactly like task 3.2's sites -> unlock(j) -> dereference(j) (closing
bug-1627's 4-site reference leak) -> outside the lock, notify_dispatch()
fires only on the retryable outcome. Each site's natural error code is
captured into a stable local before any intervening call, since errno
isn't guaranteed stable once lock()/ERROR()/free_launchinfo() sit between
the original failure and the eventual return.
handle_jobdispatch() is intentionally untouched -- it still unconditionally
calls notify_dispatch() itself for every outcome, so the retryable path
now temporarily double-notifies until task 4.1 removes that caller-side
call. Expected, not a defect.
New test_dispatch_fail_retry.c (4 tests, including a bounded-escalation
test driving 4 consecutive RPC failures on the same job: 3rd retries,
4th resolves EXIT) plus a fixed stale assertion in test_dispatch_commit.c
and additive, read-only notify-capture accessors in
test_commit_barrier_reply.c (the binary's sole notify() stub host).
Independently reviewed and approved, including explicit scrutiny of the
cross-file test accessor addition and the stale-assertion fix -- both
confirmed legitimate, not scope creep or regression-hiding.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Cxa1PmqAB5PyXfJaNvj8TN
The two terminal-classified failure sites in dispatch_a_job_() (invalid
allocation, queue-exec-info lookup failure) now actually resolve the job
instead of leaving it stuck at PEND forever with a dangling reference to
nowhere. Each site: lock(j, RTTI_LOCK_WRITE) -> genuinely calls
xce_classify_dispatch_fail(site) and branches on the result (not a
hardcoded assumption) -> mark_job_fail() under the lock (stage=0 routes
apply_job_fail_transition() to JOB_STAT_EXIT) -> unlock(j) -> the existing
dereference(j) (kept exactly where it was, not duplicated) -> the existing
return code, unchanged. No notify_dispatch() added -- mark_job_fail()'s
own hook chain is the sole notification for a terminal outcome per
design.md; handle_jobdispatch()'s still-unconditional notify_dispatch()
call is untouched (task 4.1's job).
New test_dispatch_fail_terminal.c proves both sites resolve to
JOB_STAT_EXIT with allocs left NULL, using a canary-reference technique
to prove no reference over-release (job_t's real refcount has no test
accessor). Independently reviewed and approved; applied the reviewer's
one non-blocking fast-follow (arm the canary before the call under test,
not after, so it's an independent proof rather than relying on other
assertions to crash first) and re-verified with a clean incremental build.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Cxa1PmqAB5PyXfJaNvj8TN
dispatch_a_job_()'s previously-unconditional job.allocs commit is now
gated on xce_startjob_req() actually succeeding (rc >= 0). In that same
successful branch, under a newly-acquired lock(j, RTTI_LOCK_WRITE) (a
real pre-existing locking gap this call site had -- it took no lock on
the job object itself before this), the job transitions to JOB_STAT_RUN,
dispatch_fail_count resets to 0, and a WAL_JOB_DISPATCH fact is appended
for durability. The failure path is otherwise unchanged -- classification
and resolution of the six failure sites is tasks 3.2/3.3's job, not this
one's.
Adds an XCE_TESTING-only dispatch_a_job_test() wrapper (dispatch_a_job_()
is static) and test_dispatch_commit.c, proving: state->RUN, allocs
committed correctly, counter resets, and durability survives a real
persist_recover() replay with no WAL_JOB_START present.
Independently reviewed and approved. Two pre-existing, out-of-boundary
findings surfaced and logged for later tasks: test_commit_barrier_reply.c's
test_jobdispatch_receipt_ack_no_wal_append will need updating by task 5.4
(Req 5.3 anticipates this), and bug-1429's hang was reconfirmed a 3rd time
(unrelated to this change).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Cxa1PmqAB5PyXfJaNvj8TN
Adds a case for NotifyData_data_jobDispatchFail to sched_handle_notify()'s
switch, fixing bug-1625 -- the notify was previously silently discarded
(falling to default: -EINVAL), leaving job->accounts/job->allocs stale
forever on any dispatch failure. No classification logic here: the
controller has already decided PEND is correct before sending the notify;
this reuses the same XCE_SCHED_OP_JSTATE_CHANGE enqueue path the adjacent
schedExitJob/schedFailJob cases already use, and relies on core_events.c's
existing free-on-non-RUN branch to release the stale accounts/allocs.
Independently reviewed and approved: full scheduler suite passes (51/52,
one pre-existing unrelated flake -- bug-1560).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Cxa1PmqAB5PyXfJaNvj8TN
sched_commit_decision()'s DISPATCH branch now sets job->state = JOB_STAT_RUN
in the same operation that already commits job->allocs/job->accounts, per
Requirement 1.1/1.2/1.3. sched_account_jobs()'s existing JOB_IS_RUN gate is
unmodified -- this closes bug-1624 by giving it the input it was missing: a
dispatched job now survives a round boundary in resource-in-use totals
regardless of how many rounds pass before worker confirmation arrives.
Regression test drives the real, unmodified sched_account_jobs() across a
simulated round boundary (resInUse reset, no confirmation event) and
independently reverting the one-line change reproduces bug-1624 exactly.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Add uint32_t dispatch_fail_count to the job_t wrapper struct (xce/types.h,
alongside submit_lsn, same in-memory-only/reset-on-failover precedent),
per Requirement 4.3. Data model only -- xce_job_t (wire type) untouched,
job.c untouched; increment/reset wiring and the bounded-retry threshold
check are tasks 3.1/3.3.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New wal_entry_type WAL_JOB_DISPATCH=12, reusing wal_jobstate_t verbatim
(_pad=0, absolute-value semantics), wired into both apply_wal_entry()'s
and apply_committed_entry()'s existing job-state fall-through groups per
Requirement 2.4. Restart-replay test writes only WAL_JOB_SUBMIT+
WAL_JOB_DISPATCH to a real on-disk WAL and confirms job.state==RUN after
a fresh persist_recover(), independent of WAL_JOB_START.
Review found apply_wal_entry() has zero production call sites today
(persist_recover() and standby catch-up both route through
apply_committed_entry() post the 2026-07-10 ha_apply_single_entry
refactor) -- design.md's stale characterization corrected; the dual
case-label registration itself is unaffected and correct.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Define xce_dispatch_fail_site_t/xce_dispatch_fail_class_t and
xce_classify_dispatch_fail() in job.c, mapping each of dispatch_a_job_()'s
six post-lookup failure points to retryable or terminal per Requirement
4.1/4.2. Standalone, not yet wired into dispatch_a_job_() (deferred to
tasks 3.2/3.3). Also adds this spec's requirements/design/research/tasks
docs (first commit touching this spec).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The original motivating recording (scheduler-replay-20260820-070103.replay,
named in bug-1611) no longer exists anywhere on disk -- confirmed via
exhaustive filesystem search. Substituted a real, driven 24-round/12-job
resource-constrained recording using actual driver.c/builtin_fcfs/resource.c
code, replayed through the real, unmodified interactive REPL.
This also surfaced and honestly documents a real structural limit:
Recorded-Decision Reconciliation only succeeds when a job's recorded
DISPATCH decision and its JOB_STATE_CHANGE-to-RUN confirmation land in the
SAME replay round (reconciliation searches only that round's own decoded
data). Constructing that exact coincidence from organic, continuous
scheduling is structurally impossible -- a job can't be both "freshly PEND
for this round's picker" and "already RUN before this round's picker runs"
at once. One job (ANCHOR_ID) engineers this coincidence using entirely
real constructors (matching the same precedent tasks 3 and 4.1 already
established); the other 11 jobs arrive/contend/dispatch/finish with zero
special-casing across all 24 real rounds. Recorded in tasks.md's
Implementation Notes as a scope finding for follow-up: in a real deployment
with genuine dispatch-to-confirmation latency, this narrows the feature's
real-world coverage of bug-1611/1613's dominant manifestation.
RED phase: reverting task 3's reconciliation call site makes this test
fail with the exact bug-1611 symptom in its own assertion message, plus 3
sibling tests break too; restored and green. No production code touched
(final task in the feature -- all production work landed in task 3).
50/51 scheduler tests pass; the 1 failure is pre-existing bug-1560
(unrelated).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Four checks in one run: (a) REPL-vs-batch decision equivalence unmodified
and still passing; (b) --sim-verify reports no false mismatch for a
recording with multiple already-resolved jobs across rounds (non-adjacent
memmove compaction, no cross-round bleed); (c) a replay starting from a
snapshot with a job already RUN-state and no in-window recorded decision
degrades gracefully (no crash, no fabricated value, a second ordinary job
unaffected) -- the first test to exercise reconciliation's "not found"
path through the real sched_sim_driver_run()/xce_sched_core_load_snapshot()
path rather than a hand-built core; (d) normal-mode behavior is byte-for-
byte unchanged (zero production diff, the strongest possible evidence).
Found and fixed a real test-authoring gap while building (b): builtin_fcfs
re-offers a still-PEND job as a fresh PEND every round (confirmed
pre-existing, unrelated, also visible in test_repl_equivalence.c's own
fixture) -- the first draft's round-2 fixture omitted this recurrence.
No production code touched (task 3 already completed the feature) --
git diff on sim_loop.c/resource.c/scheduler.c/driver.c/sim_verify.c is
empty. 49/50 scheduler tests pass; the 1 failure is pre-existing bug-1560
(unrelated).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds an integration test comparing round-by-round resInUse and scheduling
outcomes between a real driven normal-mode recording and a simulation-mode
replay of the identical contention scenario (worker capacity 10.0, jobs
wanting 8.0/5.0/2.0, plus a 4th job proving cross-round persistence).
Confirmed (by direct read of sim_picker_thread_fn(), independently
re-verified in review) that sim's live picker is structurally PEND-only --
it has no capacity-check/dispatch path for a freshly-evaluated job. This
means task 1.2's single-round fixture cannot be literally replayed-and-
diffed for full parity: that comparison would be tautological for
freshly-arriving jobs (sim always PENDs them regardless of accounting
correctness) and can't prove multi-round persistence anyway. Built instead
as a real recording plus a hand-crafted sim fixture modeling the identical
facts, including an already-resolved-before-replay job to exercise
reconciliation -- the same documented-carve-out approach test_sim_equivalence.c
already established for PEND-only proofs, applied here to reconciled jobs too.
No production code touched (task 3 already completed the feature). RED
phase proven by temporarily reverting task 3's reconciliation call site:
new test failed with "Expected 10 Was 0", restored and green.
48/49 scheduler tests pass; the 1 failure is pre-existing bug-1560
(unrelated).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
This is the integration point that makes the whole feature real
end-to-end. Calls sim_reconcile_unaccounted_jobs() (tasks 2.2-2.4) at
exactly the position design.md's mermaid diagram requires: after
xce_core_begin_session()'s reset, strictly before sched_account_jobs()
(so the same round's re-charge picks up every newly-reconstructed job,
Req 1.3/1.4) and before xce_core_signal_go() unblocks the live picker (so
still-pending jobs' capacity checks this round see correct resInUse, Req
2.1/2.2). decoded_session and record_ctx are the same per-round locals
sched_sim_driver_run() already declares -- no new plumbing.
sim_verify.c needs zero changes: reconciliation consumes/compacts
decoded_session->decisions before the verify drain loop runs each round,
which is what keeps the existing positional comparison correct (Req 5.2)
-- confirmed by extending test_sim_verify.c with a no-false-mismatch test
against a recording containing already-resolved jobs.
New end-to-end test proves the ordering matters for real: a reconciled
job's resInUse is charged before a live sched_check_host_satisfy() call
for a different job in the same round correctly denies it (5.0 wanted vs
2.0 remaining) and grants an exact-fit request (2.0) -- using the real
scheduler.c/resource.c accounting and capacity-check code, not stubs.
Found and fixed a test-authoring bug (get_resvals() returns nres on
success, not 0) during GREEN verification -- logged as bug-1622, a test
bug, not production.
47/48 scheduler tests pass; the 1 failure is pre-existing bug-1560
(unrelated).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Feeds a reconciled job's decision (task 2.3) through the exact same
recording/print/REPL-check calls the existing decision-drain loop uses for
a freshly-drained decision, via make_dispatch_decision() -- the same
DISPATCH-construction idiom the live allocator path already uses.
Dedup (Requirement 3.3) needs no new mechanism: the job->accounts gate
from tasks 2.2/2.3 already prevents double-reporting, now proven at the
reporting layer too (zero recorded decisions / no console output for an
already-accounted job).
Required extending sim_reconcile_unaccounted_jobs()'s signature with a
third parameter, a nullable recording-context handle -- design.md's
Service Interface updated to match, with the confirmed reasoning: the
handle only exists as a stack-local inside the round loop, and task 3's
still-unwired call site sits in that same scope, so this is necessary
plumbing, not scope creep.
46/47 scheduler tests pass; the 1 failure is pre-existing bug-1560
(unrelated).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Extends sim_reconcile_unaccounted_jobs()'s FOUND branch: takes ownership of
a matched recorded DISPATCH decision's allocation (job->allocs = entry's
alloc, not a copy -- mirrors scheduler.c's sched_commit_decision()
precedent exactly), builds job->accounts via make_job_account(), then
safely consumes the recorded entry -- nulling the source alloc pointer
BEFORE freeing the entry (preventing a double-free through job->allocs),
then compacting decoded_session->decisions via shift-down (memmove, never
swap-with-last, which would reorder the remaining entries and break the
positional --sim-verify comparison a later task depends on).
Fixed a real correctness bug found while implementing: the "not found"
check (i == n_decisions) goes stale once n_decisions can be decremented
mid-loop by compaction -- replaced with an explicit found flag.
Primary correctness bar: reconcile-then-release-through-normal-job-cleanup
is ASAN-clean. Verified with ASAN_OPTIONS=detect_leaks=1 (beyond this
suite's registered detect_leaks=0): zero double-free/UAF/overflow. Found
and logged (not fixed, out of boundary) a real pre-existing leak in
src/lib/misc.c's free_host_account() -- equally present on the live
dispatch path, bug-1621.
46/47 scheduler tests pass; the 1 failure is pre-existing bug-1560
(unrelated).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds sim_reconcile_unaccounted_jobs(xce_sched_sim_driver_t*, replay_session_t*)
to sim_loop.c -- not yet wired into the round boundary (task 3). Once per
call, finds every RUN-state job with job->accounts == NULL (the signature of
a job already resolved before this replay's own live decision-making ever
considered it) and searches this round's decoded recorded-decision stream
for a matching DISPATCH entry by jobid.
This task implements only the trigger + lookup + not-found path: when no
match exists, the job's allocation is left unknown (not fabricated), no
error is raised, and the job is safe to re-check next round (Requirement
4.1, 4.2). Match-found reconstruction (ownership transfer, freeing/
compacting the consumed entry, reporting) is tasks 2.3/2.4, not implemented
here -- decoded_session's decisions are read but not yet mutated.
6 new tests cover: not-found leaves job unaccounted, cross-round safety,
already-accounted jobs are skipped, a same-jobid PEND entry is correctly
not mistaken for a DISPATCH match, non-RUN-state jobs are gated out, and
NULL-argument safety. RED phase: compile-error-before/link-succeeds-after,
the correct RED variant for genuinely new code with no prior behavior.
46/47 scheduler tests pass; the 1 failure is pre-existing bug-1560
(unrelated).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Replaces sim_loop.c's monolithic xce_core_go() with the same
xce_core_begin_session() -> sched_account_jobs() -> xce_core_signal_go()
sequence driver.c already uses for normal-mode rounds, opening the same
interleaving window and calling the now-core-level accounting service
(task 1.1) at the same relative position. Error-handling for a failed
session start is preserved byte-for-byte (same cleanup, same rc source).
Both interactive and batch simulation runs go through this one call site.
This is bug-1613's wiring half: sim_loop.c now calls sched_account_jobs()
at all (it never did before). resInUse is still zero end-to-end after this
task alone, because job->accounts is never populated by any live path in
sim mode yet -- that's Recorded-Decision Reconciliation (tasks 2.2-2.4),
not yet implemented; a comment marks where it slots in.
Adds a call-count/session-window regression test proving the wiring itself
(RED-phase reproduced live via git stash + rebuild, matching bug-1613's
symptom exactly). 8 sibling white-box test files needed a link-satisfying
sched_account_jobs() stub, discovered via actual linker errors.
45/46 scheduler tests pass; the 1 failure is pre-existing bug-1560
(unrelated).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds a dual-use .replay fixture (3 jobs competing for insufficient worker
capacity) that later tasks need to prove capacity-aware parity under
contention: a real recorded normal-mode session (built by driving the
genuine sched_check_host_satisfy()/sched_commit_job_alloc() capacity/
accounting chain, not mocked) that is also directly replayable through the
real simulation driver. Two tests: fixture shape (job B genuinely denied
while A+C hold the full 10.0-unit capacity, verified against the decoded
recorded decision stream) and sim-driver replayability.
RED-phase proven: raising WORKER_CAPACITY to eliminate contention makes the
shape assertion fail as expected before reverting to the genuine-contention
value. 44/45 scheduler tests pass; the 1 failure is pre-existing bug-1560
(unrelated).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Relocates sched_account_jobs()/sched_charge_account()/sched_uncharge_account()/
sched_update_account()/sched_update_res_accounts()/sched_commit_job_alloc()
from xce_scheduler_t* to xce_sched_core_t*, mirroring the sched_resolve_job_picker()
precedent, so the simulation driver can call the same accounting service the
normal-mode driver already uses. Pure signature relocation -- every body
reference was already sched->core.*, no logic change. Updates the 3 real call
sites (driver.c's normal-mode round, scheduler.c's sched_begin_session and
sched_commit_decision) and 7 existing tests' link-satisfying stub signatures.
Adds test_resource_accounting.c proving Requirement 1.4: the relocated
accounting produces identical resInUse/sharedInUse output whether called
against a core embedded in xce_scheduler_t or xce_sched_sim_driver_t.
43/44 scheduler tests pass; the 1 failure is pre-existing bug-1560
(unrelated recording.c sandbox-permission ordering issue).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Elevates the normal-mode/simulation-mode driver equivalence guarantee
from a one-line architectural description in CLAUDE.md to an enforced
steering constraint (scheduler-driver-equivalence.md), backed by
bug-1611/bug-1613 as concrete evidence of violation. Scopes the fix as
its own spec (scheduler-sim-decision-parity, requirements + design)
rather than reopening the closed scheduler-core spec or folding it
into scheduler-sim-repl-verbosity's explicitly narrower boundary.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Extends bug-1588's job.c fix to the remaining raw-%lu jobid logging sites:
8 worker daemon files (xcecd_worker.c, controller_connector.c, uv_ipc.c,
xcecd_worker_utils.c, xcecd_dbus_manager.c, xcecd.c, main.c, xcecd_cgroups.c)
and src/controller/testsuite/test.c (xce_test, heavily used for controller
testing). 99 call sites converted to fmt_jobid()+%s, matching the existing
convention. Non-jobid %lu values (lsn, client id, byte offset) and raw-numeric
identifier/path construction (checkpoint dir, systemd unit name, XCE_JOBID
env var) are deliberately left untouched.
Verified via /xce-build worker and controller (asan, --incremental): both
compile clean with zero warnings tied to the change; worker suite 4/4 OK,
controller suite 4/5 OK (the one failure is the pre-existing bug-1561
overlayfs fdatasync flake, unrelated to this change).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds src/tools/test-dirty-fingerprint-nix-production-path.sh, reusing task
6.1's isolated-git-worktree technique. Runs nix build ./src#xcecore_debug
(no --impure) twice with different tracked-file edits to flake.nix,
cross-checking nix eval's eval-time myDirtyFingerprint value against the
real build log's mesonConfigurePhase flags: line for each.
This sandbox's nix build dispatches by default to an unreachable-in-
practice remote builder, making a directly-runnable binary impractical to
retrieve -- confirmed genuinely expected sandbox behavior. The eval+build-
log cross-check is not a weaker substitute: self.narHash's value is baked
as a literal string into the derivation at eval time, before any build
phase runs, so eval-time and build-time values cannot diverge by
construction. Forcing --builders '' (local-only) was investigated and
reaches real local compilation with a direct log match, but still can't
produce a fully linked binary here due to a second, unrelated network
dependency -- confirming no stronger approach is currently available.
Verified independently by review with real nix build invocations,
including a live-witnessed remote-builder connection attempt and a
genuine local-only run: two builds with different edits produce different
fingerprints in both eval and build-log evidence; reverting reproduces the
original value exactly; --impure never used; no git dependency in the
build sandbox; worktree list and flake.nix/nixSupport/ confirmed clean
before and after every run.
This is the final task of the dirty-content-fingerprint spec -- all 16
sub-tasks are now complete.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds src/tools/test-dirty-fingerprint-startup-log-unchanged.sh, reusing
task 6.1's already-approved isolated-git-worktree technique. Builds
scheduler and apiserver for real on a genuinely dirty tree, starts both
daemons, and proves --version/-version show a real fingerprint while
their startup logs show the unchanged, fingerprint-free original format.
Apiserver's injected fingerprint reuses scheduler's own extracted value
(same dirty tree) rather than an independent recomputation -- verified
independently by review as legitimate, not tautological: apiserver has no
fingerprint-computation code of its own (only ever receives an externally
injected value via -ldflags), and the test still exercises apiserver's
own real composeVersionDisplay()/logger.Info code on a genuinely running
binary, with a round-trip check that would catch a real strip-and-append
bug.
Verified independently by review with a fresh full run plus a separately-
authored 4-case discrimination probe outside the script's own demo block.
No leftover processes, worktrees, or build dirs after either run.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
