- bug-1872 (worker): "Failed to find any disk statistics in
/proc/diskstats" ERROR every 15 s on an NVMe-only host. The whole-disk
filter guessed from the name and skipped anything ending in a digit or
containing 'p' -- every nvmeXnY, mmcblkN, even sdp -- so io was never
reported. diskstats.h now counts a device only when
/sys/block/<name>/device exists (real disks; not partitions, loop, dm,
md, zram), and a host with no disk warns once.
- bug-1873 (worker): "Failed to get worker pid" WARN on job start. MainPID
reads 0 until systemd has forked the new transient unit; xcecd.c already
retries, so the miss is DEBUG and the final failure names the unit.
- bug-1874 (scheduler): deprecation WARN for the legacy xce_sched_fcfs on
every start, though builtin_fcfs is the picker. Registration still wraps
a job_elect_fn plugin but no longer warns; selecting one warns once.
- bug-1875 (apiserver): "Not running as root -- PAM authentication will not
work" with the default provider config_file; now only for provider pam.
- bug-1876 (controller): standbys logged "cluster_init_phase2 ... failed
(rc=-22)" WARN every 3 s while waiting for the primary's config push,
a state the function itself calls normal. It returns -EAGAIN for that
wait; callers log it at INFO, other failures still WARN.
- bug-1877 (controller): "WAL/snapshot stored unencrypted" warned without
looking. persist_path_encrypted() checks fscrypt (statx) and dm-crypt
(sysfs dm/uuid CRYPT-, through LVM slaves); the warning stays when the
storage is not shown to be encrypted (e.g. a plain /tmp).
Tests: worker diskstats_test (2 of 4 RED on the old filter with pc13v's
/proc/diskstats), controller test_phase2_cold_boot and
test_persist_encryption, scheduler picker tests, apiserver
TestRootWarning. Full ASAN build: all 113 suites pass (controller 319/0,
harness 141/0).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
bug-1790's fix worked but put limit-plugin-specific logic in the wrong
place: seqjob_prepare_allocation()/parjob_prepare_allocation() (the
allocator plugins) unconditionally pre-computed a job-wide total for
every per-host resource in the job's rusages, "just in case" some
global limit needed one. That's the allocator plugins' concern leaking
into limit evaluation -- duplicated across both allocators (a third
would need it too), and wasteful (computed for resources no limit
actually references).
Moved ownership to sched_fill_limit_requests() (resource.c), called
once centrally from plugin_prepare_allocation() regardless of which
allocator ran:
- Removed calc_wanted_host_resval_job_totals() and its calls from both
allocator plugins entirely.
- Added calc_wanted_job_total_resval() (resreq.c): an on-demand,
single-resource lookup by name (no resmgr/key_find needed -- the
caller already has the resolved xce_resource_t), computing the same
job-wide-total formula only for the one (scope, underlying-resource)
combination that needs it -- a GLOBAL limit on a per-host resource.
The other three combinations are unchanged, still reading straight
out of alloc_req.
- sched_fill_limit_requests() gains rusages/nhosts/nslots parameters
back (a genuine need this time, not a re-added unused one).
plugin.c's two call sites pass obj->u.primary->resreq->rusages
(NULL for COMPOUND/ALTER, matching this codebase's existing scope
convention for those tags) and ctx->nhosts/ctx->nslots.
All 23 testsuite link-satisfying stubs mechanically updated. Removed
the two allocator-level regression tests from the first pass (the
behavior they proved no longer exists by design); rewrote
test_fill_limit_requests_global_limit_on_host_resource_reads_host to
exercise the new on-demand path directly, nslots=3 to prove the job's
WHOLE total is used.
Full xce-build.sh all asan --incremental: 94/94 Ok, zero regressions.
Live re-verified against the same ug1_global_mem deploy/scenario:
byte-identical scheduler trace to the pre-refactor result, confirming
behavior-preserving.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GLfB5uWRdmx2WiZSFC7Fm7
sched_fill_limit_requests() used to read a limit's underlying resource's
want from the same vector its own virtual-resource entry gets written to.
That's wrong whenever the two differ in scope -- e.g. a GLOBAL limit built
on top of a per-host resource like "slots" (limits.yaml's
ug1_normal_slots): the limit's own vres entry belongs in alloc_req->shared,
but "slots"'s want is only ever staged into alloc_req->host by
seqjob/parjob_prepare_allocation(), so the old code always read a zero and
silently never enforced the cap.
Now both the read source and write destination are derived independently
from each resource's own XCE_RESF_GLOBAL flag (vres->res for the source,
vres->vres for the destination) -- the same flag
calc_wanted_global_resvals()/calc_wanted_host_resvals() (resreq.c) already
dispatch on, so this is the existing rule applied consistently rather than
a new one. Also drops sched_fill_limit_requests()'s unused xce_scheduler_t*
parameter.
Full scheduler suite: 76/77 (the one failure, test_job_rusage_reconciles_
mem_reservation_against_usage, is bug-1762, pre-existing and unrelated).
Live-verified against a fresh single-node deploy.
Filed bug-1790 to track a known, deliberately out-of-scope residual gap:
a future global limit on a per-host resource other than "slots" would need
calc_wanted_host_resvals() to also run during the global phase for that
resource, which nothing currently does.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GLfB5uWRdmx2WiZSFC7Fm7
Adds reservation-vs-actual-usage reconciliation for real (gauge-style)
resources, using mem as the concrete case -- documented in the new
resource-accounting.md steering doc.
Policy: charged = max(reserved, actual). A job's rusage[mem=...]
request is an estimate made before it has run, and the real usage the
worker later reports may land above or below it; charging a flat
reservation for the job's whole life either starves other jobs of
memory it never uses (when actual stays below the estimate) or lets
the host be driven into genuine oversubscription (when actual exceeds
it). Available memory for scheduling is then the host's OS-reported
available figure minus, per job, only the UNUSED SLACK of the
reservation (max(0, reserved - used)) -- never the job's actual usage
on top of that, since the OS's own figure already reflects it.
The existing xce_res_account_t{used, reserved, allocated} fields and
sched_update_res_accounts()'s used+reserved charge formula already
implement this exactly, once `used` is set to the OVERAGE beyond the
reservation (max(0, actual - reserved)) rather than left at its
permanent 0.0 default -- nothing previously computed it.
New (resource.c): sched_reconcile_host_resource_usage() sets that
overage on one xce_res_account_t and applies just the DELTA to the
affected worker's resInUse (not a full uncharge/recharge of the whole
job_account, which would needlessly re-touch sibling resources like
"slots" charged in the same account). sched_reconcile_job_resource_usage()
is the wrapper driven from a raw rusage report: maps the worker's real
wire resname ("memory_rss", same worker-resname-vs-scheduler-resource-
name split bug-1735 already established for the controller side) to
the scheduler's "mem" resource, and is a no-op when the job spans more
than one host (the wire report carries no per-host attribution today --
a separate, undocumented-until-now gap, out of this fix's scope) or
never requested rusage[mem=...] in the first place (reserved=0, nothing
to reconcile).
Wired into sched_apply_job_rusage() (schedobj.c), which already
receives every job rusage tick but previously only stored it for
display/plugin hooks with no resource-accounting effect at all.
Compatible with sched_account_jobs()'s existing per-round resInUse
reset+re-derive cycle (bug-1624): the reconciled `used` value is
persisted on the job's own account record, which that re-derivation
already reads from, not just a transient pool-level delta that a
round boundary would wipe.
Added link-satisfying stubs to the three white-box test files that
#include schedobj.c directly (test_job_update.c,
test_picker_config_fields.c, test_picker_wiring.c) -- none of them
exercise real job->accounts, so the new call is unreachable there, but
still needs to link. 10 new regression tests in
test_resource_accounting.c cover the core formula (below/at/above the
reservation, delta-only pool updates, sibling-resource isolation) and
the wrapper's scoping rules (resname mapping, multi-host skip,
no-request no-op).
Full scheduler suite: 55/55 passing, zero regressions.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019QxaSzHRB7pmYFp4cVnwkA
Defines xce_core_event_type_t/xce_core_event_t (9 event kinds: config,
job, worker, resource, resval full/delta, job state change, job update,
queue update, job rusage) in core.h. Implements xce_core_push_events()
in a new core_events.c (split out of core.c to stay under the 800-line
cap): rejects -EBUSY mid-session, otherwise applies each event's core-
state mutation and fires the corresponding picker hook synchronously,
exactly once per event, before returning. CONFIG_PUSH decomposes the
pushed config's embedded queues/resources/resvals via shared helpers
(also reused by QUEUE_UPDATE's upsert path), mirroring the existing
sched_init_config()/sched_init_resources()/sched_init_sharedInst()/
sched_init_queues(). Narrows sched_resolve_job_picker() to take
xce_sched_core_t* (pure type change, zero behavior change). Purely
additive — not wired into the live scheduling path yet (task 5.x).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019dw5WnN3DXStaEaPYfACU1
Splits xce_scheduler_t along the controller-I/O seam: xce_sched_core_t
(new core.h/core.c) now holds all scheduling state (jobs/queues/workers/
users/projects/resource managers/plugins/three-thread-cbuf pipeline),
while xce_scheduler_t shrinks to {core; apictx; cluster_cfg}. Proven via
an nm-based link-time isolation test (zero netio/xcecli/idgen/delaymgr
symbols reachable from core.c) plus a reproducible wall-clock-call guard.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019dw5WnN3DXStaEaPYfACU1
Registers builtin_fcfs at scheduler startup and makes it the default
job_pick_plugin, replacing the hardcoded "xce_sched_fcfs" literal in
sched_job_picker() with a fail-loud lookup through sched_resolve_job_picker().
The picker thread now branches legacy job_elect_fn plugins (delegated
unchanged, preserving their self-contained wbuf-driven loop) from native
xce_job_picker_iface_t pickers (driven by a new per-session loop), and the
allocator now calls on_dispatch/on_pend for every picker as Req 1 AC 4
requires. Closes task 2.3's flagged picker/allocator concurrency race with a
mutex on fcfs_plugin_data_t, and adds cancel points to next_job().
