Adds the remaining 3 of 4 handle_repl_config_push reject-path tests
(malformed request, missing bytes/sha256, conf_save_config failure via
a deterministic ENOTDIR fixture), the EAGAIN-still-accepts test, and
term-adoption-on-accept (task 2.2's own test only covered the reject
case). Requirement 2.4 (unknown-outcome handling) is already covered
by the pre-existing test_wait_all_with_timeout_slow_threads, cited
rather than duplicated.
1055 -> 1060 tests, 0 failures.
myreq_handler's ReplConfigPushReply branch now routes cack->term
through raft_on_higher_term_observed (same entry point the
heartbeat-reply and WAL-NACK vectors use), regardless of accept/reject,
without altering the existing accept/reject branching.
Adds myreq_handler_for_test (XCE_TESTING-only) to drive the real
dispatcher in tests, following the peer_ctrl_msg_handler_for_test
precedent. Requires cluster.c in controller_unit_test_src plus the
established link-satisfying fake stubs for its unrelated switch-case
dependencies (same pattern already used by test_worker_join.c and
test_commit_barrier_reply.c).
handle_repl_config_push now sends a ReplConfigPushReply{accepted,term}
from every exit path instead of silently dropping on the four reject
conditions (malformed request, missing bytes/sha256, sha256 mismatch,
conf_save_config failure). Term is sourced live from c->ha.term.
-EAGAIN activation-defer still replies accepted=1, unchanged.
Adds an XCE_TESTING-only send-hook mirroring ha_wal_ack_send_hook so
tests can observe the reply payload without a live endpoint.
Chaotic election churn (config-upgrade-snapshot task 8.6's force_elect_node
rotation) can leave a standby log-conflicted after a rejoin. Fixing this
needed three compounding layers, each unit-green but still failing the
identical live scenario until the next layer landed:
1. ha_raft_on_repl_nack (ha.c/ha.h): routes a WAL-ACK NACK into the raft
library's nextIndex backoff and immediately repl_start_catchup's the
standby at the corrected position, instead of the 16-strike silent
eviction with no catch-up driver after it. Correct from the start, but
live soak still failed identically: nothing ever produced the NACK this
code was waiting for.
2. Standby-side NACK sending: ha_apply_term_entry_via_library's logOk-reject
path now calls a new ha_send_wal_ack_reply_ex(..., success=0) instead of
silently dropping the reject. ha_send_wal_ack_reply had hardcoded
success=1 unconditionally -- the only WalAckReply sender in the
controller -- making (1)'s NACK-routing correct but unreachable dead
code. New ha_wal_ack_send_hook (XCE_TESTING) lets a unit test observe
the NACK without a live endpoint. Live-confirmed the NACK now reaches
the primary -- but the scenario still failed for a third reason.
3. ha_compute_repl_stream_ceiling_lsn (ha.c/ha.h): ha_stream_wal_to_standby's
catch-up range was hard-bounded at committed_lsn, which can never advance
in this exact scenario because advancing it requires an ACK from the very
standby that's stuck catching up (2-of-3 alive, this standby is the only
path to a new majority) -- a self-referential deadlock. Widens the
STREAM_WAL ceiling (and the convergence check gating it) to the leader's
own log tail, matching raft.tla's real AppendEntries semantics
(leaderCommit is advisory, never a send-cap), while reusing bug-1478's
exact guard so this doesn't reopen that trap (never widen onto a trailing
local-only checkpoint's own unstreamable LSN).
Verification: controller_unit_test 1053/1053 PASS, clean twice, including
new regression tests for all three layers (test_config_repl.c,
test_term_safety_adapter.c, test_ha_role.c), each RED-confirmed against its
pre-fix behavior before the real fix was restored. Three successive live
run-ha-soak.sh --config-upgrade re-runs tracked each layer landing; the
final run passed end-to-end -- all 3 force_elect_node rounds succeeded
(ctrl-2: 3/3 jobs acked term=6; ctrl-3: 3/3 jobs acked term=7, never
previously reached), zero materialized-state divergence, zero job loss.
Unblocks config-upgrade-snapshot task 8.6.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
A node that takes myapp_run's skip_election passive path (bug-849 --
"leader already known after the startup stagger") makes exactly ONE
cluster_init_phase2 attempt. All 5 call sites (myapp.c's skip_election
block, raft_cb_become_leader, raft_cb_become_follower,
ha_elect_evaluate_and_signal's two branches) latched ha->phase2_done = 1
unconditionally after calling cluster_init_phase2, discarding its return
value. If that one attempt raced config availability and failed, the node
was permanently stranded: commit_engine_init never ran, so
apply_committed_entry never applied any committed WAL entry for the rest
of the process's life -- and for a skip_election node specifically,
nothing else would ever retry it, since the other 4 call sites only fire
via that node's own raft-library state transitions, which never happen
for a passive standby whose primary keeps heartbeating normally.
Extracted a shared, idempotent retry (ha_phase2_retry_fn, mirrors
upgrade_materialization_retry_fn's shape) plus a delaymgr-scheduled,
self-rescheduling trigger (ha_schedule_phase2_retry) -- self-rescheduling
because, unlike config_activate_retry/upgrade_materialization_retry which
are re-triggered externally by recurring commit-advance events, nothing
else recurs for a node stuck on the passive path. Wired into all 5 call
sites; raft_cb_become_leader additionally refuses promotion on failure
(mirroring the sibling upgrade_materialization_fenced refusal already in
that function -- a promoted primary with an unwired commit engine is far
worse than a delayed promotion).
TDD: 4 new tests, RED confirmed by temporarily reverting the rc-gating.
GREEN: full suite 1044 tests, 0 failures. Live-verified via
run-ha-soak.sh --config-upgrade (the scenario that found this bug): the
retry fires for real (4 failed attempts, then success) and the soak's
checkpoint-identity/config-identity/host-admin-status assertions -- the
things bug-1477 blocked -- all pass.
myconf->lock (mylock_init/fini wiring) had landed but load_primary_config()
itself was left in its RED-phase reproduction state (unguarded, decoding
directly into the shared myconf->cluster_config field), so the fix's own
regression test failed on resume: thread B raced through while thread A was
parked mid-call.
Wraps the whole free-decode-publish sequence in myconf->lock (acquired first,
released on every return path) and decodes into a local cluster_config_t*
first, publishing into myconf->cluster_config only after full decode and
validation succeed -- closing the UAF/double-free window a live 3-node ASan
soak caught (two concurrent handle_repl_config_push deliveries for the same
standby racing two load_primary_config calls).
Verified 4/4 clean full-suite runs (1036 tests, 0 failures) including the
specific race test.
A restarted standby could get permanently stuck unable to catch up,
with the primary re-streaming the identical doomed AppendEntries range
every heartbeat with zero progress -- discovered via a live 3-node
config-upgrade-snapshot soak. Liveness-only; no safety invariant
(Election Safety, Leader Completeness, State Machine Safety, Commit
Durability) was ever violated.
Three-layer root cause, all now closed:
1. ha_stream_wal_to_standby (config_repl.c) used to skip advancing its
prev_streamed_lsn/prev_streamed_term tracker across WAL_CHECKPOINT
entries (a local-only, never-replicated marker that still consumes
a real LSN slot). Now advances across them too, while still never
shipping a catchup entry for the checkpoint itself.
2. ha_apply_term_entry_via_library (ha.c) now JIT-resyncs
ha->raft.log_len from persist_durable_floor() before consuming an
AE, to correct for persist_write_checkpoint_marker advancing
current_lsn without going through raft_log_append/record_entry_term
(pre-existing gap, bug-1466, not itself fixed here).
3. The actual root cause, found via real instrumentation after layers
1-2 alone still left a regression test red: record_entry_term's
array-growth realloc zero-filled new slots, silently reclassifying
a checkpoint's deliberately-never-recorded gap slot from "absent"
to "present, term=0/WAL_LEGACY_TERM" the instant any later LSN got
recorded -- a time-dependent read where a permanent fact was
assumed. Fixed with a TERM_INDEX_UNSET (UINT64_MAX) sentinel that
growth now fills gap slots with instead of zero, so entry_term_locked
can distinguish "never explicitly written" from "explicitly
recorded as legacy term 0" regardless of later array growth.
The same determinism fix exposed a second, independent instance of the
identical wedge via the snapshot-install catch-up path instead of
WAL-streaming catch-up: persist_reconcile_checkpoint_term recorded a
wire checkpoint_term of 0 as a raw, explicit write (bypassing the
growth-fill sentinel entirely), so a snapshot-installed standby read
the checkpoint LSN back as WAL_LEGACY_TERM(1) forever while the leader
now correctly read its own checkpoint LSN as absent(0) -- the same
permanent logOk mismatch, a different code path. Fixed by substituting
TERM_INDEX_UNSET for a wire value of exactly 0 before recording; a
wire 0 is unambiguous (persist_entry_term's own contract never returns
raw 0 for a present entry, so 0 can only mean genuine absence).
Independently reviewed across three rounds: sentinel mechanism
verified via real RED->GREEN revert-and-rebuild; a documentation
claim that config_repl.c/ha.c were "comment-only" corrected; the
snapshot-path gap independently traced, confirmed real via its own
RED->GREEN cycle, and fixed; two stale doc comments (persist.h's
public contract, ha.c's call-site rationale) still describing the
disproven pre-fix legacy-0 convention corrected. Suite: 1028 -> 1035
tests, 0 failures.
Add regression test proving Req 4.4/7.2: a second WAL_CONFIG_MARKER
committing while the first's forced checkpoint is still in flight
(simulated via the checkpoint_in_progress CAS across both markers'
commit+apply) cleanly supersedes it, with the settled state reflecting
only the newer marker. Verified via a field-aware byte comparison
(post-checkpoint_lsn) against a non-racing control fixture, plus
mid-race assertions that materialization is still incomplete at that
point (cfgref_present false, fence set) despite activation already
tracking the newer config. Test-only; production mechanism (already
implemented) unmodified. Suite: 1027 -> 1028 tests, 0 failures.
Prove Requirements 5.2/5.4/5.5/6.3 via deterministic fault injection at
the two critical upgrade windows, entirely at the unit level using the
XCE_TESTING hooks earlier tasks built for exactly this purpose -- no
live soak needed.
test_marker_checkpoint_fault_hook_crash_then_restart_resumes_materialization
extends the existing fault-hook seam test: after simulating a crash
before the checkpoint write durably completes, it boots a genuinely
fresh persist_t/cluster_t against the same on-disk WAL via
persist_recover() (a real boot-replay simulation, not a same-process
re-call) and confirms materialization resumes and completes correctly.
test_leadership_change_mid_materialization_completes_via_same_generic_apply_drain
proves a promoted member's materialization completes identically to a
non-promoted control member's, by draining each through its actual
production entry point and comparing checkpoints byte-for-byte -- a
regression guard against any future role-conditional branch creeping
into the marker-apply path.
Build the live 3-node chaotic-multi-kill config-upgrade soak scenario
(run-ha-soak.sh --config-upgrade) required by Requirements 4.1, 4.3, 6.1,
6.4. This needed genuinely new client-side infrastructure: a hand-rolled
capnp send path for OP_upgradeConfig (the auto-generated encoder is a
no-op for its Data fields, worked around the same way
xce_replconfigpush_req_raw already does), plus cmd_hostctrl/cmd_upgradeconfig
CLI commands.
Building and running this live surfaced two real production bugs, both
fixed here:
- bug-1468: an unrelated prior commit inverted OPCode_upgradeConfig's
primary/standby dispatch guard in cluster.c, making config upgrades
unreachable from any network client.
- bug-1469: apply_committed_entry's WAL_CONFIG_MARKER case never called
config_activate_committed(), so the node that originates a config
upgrade never refreshed its own in-memory state as part of committing
it. Killing that node before some later, unrelated event happened to
refresh it left its checkpoint permanently stale -- the first live,
empirical reproduction of bug-857's originally hypothesized failure
mode. Fixed by activating before the marker-triggered checkpoint write,
since checkpoint content is built from live runtime tables that only
reflect the reload after activation runs.
A separate, narrower checkpoint divergence (bug-1471, not config-related)
remains open and still blocks a clean soak PASS -- task 8.6 stays
in-progress until it's resolved.
Wires task 6.1's upgrade_materialization_verify/upgrade_materialization_fenced
into ha_dispatch_gate's CTRL_PRIMARY branch (sequential block alongside,
not merged into, the existing config_serve_fenced check -- same
replication/read-only opcode allowlist, refuses state-changing ops
with -XCE_ERR_NOT_READY while fenced) and the promotion gate
(raft_cb_become_leader refuses to become CTRL_PRIMARY while fenced,
introduces no new WAL/log-completeness eligibility mechanism, never
self-terminates). Adds a 4-function self-triggering retry trampoline
(upgrade_materialization_retry_fn/_vtask_entry/_delaymgr_trampoline/
schedule_upgrade_materialization_retry) mirroring
config_activate_retry_fn's exact shape, hooked into
ha_cb_commit_advanced_stub alongside the existing config-byte retry.
Fixes a real bug caught on review: the fence had no production path
that could ever engage it from its zero-initialized default -- every
setter call site was gated on the fence already being set (closed
loop), making the new gate checks permanently dead code. Fixed with
two unconditional upgrade_materialization_verify() call sites:
persist.c's apply_committed_entry WAL_CONFIG_MARKER case (right after
persist_checkpoint_marker_triggered returns, regardless of its rc) and
myapp.c's boot sequence (right after config_activate_committed, for
Req 5.2 crash/restart resume). New test drives the fence through the
real production trigger (a forced -EBUSY checkpoint miss on a real
marker commit+apply), not a direct verify() call, proving the
end-to-end path actually works. Task 6.2 of 19.
Requirements: 3.1, 3.2, 3.3, 3.4, 4.3, 5.5
Adds a new, independent fence (ha_state_t.upgrade_materialization_fence)
distinct from the existing config-byte serve-fence: that fence tracks
whether the locally-held config bytes hash-match the committed marker;
this one tracks whether THIS MEMBER'S OWN upgrade-snapshot
materialization (task 5's marker-triggered checkpoint) has actually
completed for the current committed marker, with the live on-disk
config bytes still hash-verifying against it right now.
upgrade_materialization_verify(c) mirrors config_activate_committed's
shape: reads the current committed marker, checks whether
persist.cfgref_present/cfgref_tag/cfgref_sha already reflect it (stamped
by every checkpoint via scan_latest_committed_config_ref -- proof this
member's own materialization ran for this exact marker), and separately
re-reads the LIVE on-disk config bytes fresh on every call (never a
cached/embedded copy) to hash-verify them too. Both must hold for the
fence to clear. Logs loud only on the 0->1 transition, never
exits/aborts, always fail-loud + fence + stay alive + retriable.
upgrade_materialization_fenced(c) is the trivial atomic-read accessor.
Not yet wired into the dispatch gate, promotion gate, or an automatic
retry trigger -- that's task 6.2. Task 6.1 of 19.
Requirements: 1.8, 3.2, 3.4
Adds an explicit case WAL_CONFIG_MARKER to apply_committed_entry,
replacing its no-op treatment, that forces a checkpoint at exactly the
marker's own (term, lsn) via two new helpers:
persist_checkpoint_write_locked(p, checkpoint_lsn) -- the checkpoint
core (pin lsn, scan config ref, write_snapshot, trim, rotate) taking
an explicit LSN and never acquiring apply_pump_lock itself
persist_checkpoint_marker_triggered(p, lsn) -- shares the existing
checkpoint_in_progress CAS guard, calls the above with the marker's
own lsn
This fixes two hazards design.md's "call persist_checkpoint() directly"
text didn't account for: (1) apply_committed_entry's live-pump caller
(persist_apply_pump_run, used by both primary and standby online-apply)
already holds apply_pump_lock across the dispatch call -- a direct
persist_checkpoint() call would self-deadlock on that mutex; (2)
last_applied_lsn/replay position only advance AFTER apply_committed_entry
returns at both call sites, so pinning checkpoint_lsn from
last_applied_lsn inside the marker case would label the checkpoint with
the previous entry's LSN, not the marker's own -- fixed by threading the
marker's own lsn parameter through explicitly. A -EBUSY outcome (a
concurrent periodic checkpoint mid-flight) is logged at TRACE and treated
as expected/self-resolving, never retried. The new case has no effect on
entity interpretation/re-homing (Req 1.8).
New test_upgrade_snapshot_apply.c drives WAL_CONFIG_MARKER through the
REAL production call paths (persist_apply_pump_run and boot replay via
persist_recover), not a bare apply_committed_entry() call, so the fix is
actually proven against the lock-holding context rather than assumed.
Also fixes a genuine regression in test_config_repl.c surfaced by
WAL_CONFIG_MARKER apply having a real side effect for the first time
(bug-1466): an fsync-worker-thread race (t42_wait_applied polling helper,
mirrors test_apply_pump.c's tap_wait_applied) and one test call site
trusting an unreliable raft-derived LSN. Surfaces (but does not fix, out
of this spec's boundary) a pre-existing ha-term-safety/raft-log-replication
gap: persist_write_checkpoint_marker bypasses ha_primary_log_append,
breaking its documented current_lsn==log_len+1 invariant once a
checkpoint interleaves with primary appends -- log_len feeds real
RequestVote freshness comparisons, not advisory-only as first assumed;
severity corrected in bug-1466. Task 5 of 19.
Requirements: 1.1, 1.5, 1.8, 4.4, 5.2, 5.3
load_snapshot_entities' queue-frame decode migrates from the old raw
{name_len,name,status} layout to {payload_len, capnp QueueAdminState
bytes}, still calling the unmodified restore_queue_state. Adds a new
host-frame section decode after queues, dispatching to
restore_host_state (worker.c, task 3) with the same bounds-checking
and restore-before-advance discipline as the existing job/queue loops.
Un-ignores test_snapent_load_snapshot_restores_entities_before_advancing_position
(blocked since task 2.2) -- now passes for real. Also fixes a genuine
regression in test_snapshot_recv_out_of_order_chunks_assemble_correctly
(test_config_repl.c): its synthetic checkpoint-body filler landed on
the new host_count field's offset, tripping the cluster==NULL guard --
pinned to a well-formed host_count=0, matching that test's existing
fmt/job_count/queue_count precedent. Task 4 of 19.
Requirements: 1.10
Adds independently-extensible Cap'n Proto frames for the upgrade
snapshot's host/queue admin-state sections (frame-only, not reusing
Worker/QueueConf which bundle dynamic state) and bumps
SNAPSHOT_FORMAT_VERSION 1->2 so a checkpoint written under the prior
raw queue-frame layout is fail-loud rejected rather than
misinterpreted. Task 1 of 19.
Requirements: 1.9, 5.7
Drops the two cfg.port = ...; struct-literal assignments in
test_commit_barrier_rollout.c and test_config_repl.c (removed field, task
1.2). Repo-wide sweep found no other genuine cluster_config_t literal
referencing a removed field.
Full clean build now succeeds (153/153 targets) and controller_unit_test
passes 976/976 with zero new failures.
/xce-audit-invariants controller found two live violations of the async
I/O thread-role contract: ha_demotion_convergence_fn (ha_convergence.c)
ran WAL truncation + tlog_exit()+execv() directly on the delaymgr thread,
and ha_catchup_continuation_fn (config_repl.c) ran unbounded WAL-streaming
to a standby directly on delaymgr -- the same single thread that drives
heartbeats and election timeouts cluster-wide, so either blocks liveness
for the whole cluster and risks a spurious election.
A prior vtask-pool offload attempt (2026-07-10, bug-1429) deadlocked
controller_unit_test because c->ha.pool is never initialized by the
lightweight unit-test fixtures these functions run under, and was fully
reverted. This fix instead uses the codebase's established slow-lane
pattern (the same mechanism already used for snapshot-send, config-push,
and peer connect) -- a 4th and 5th instance, not a new mechanism.
New g_drive_async_demotion_offload / g_drive_async_catchup_offload flags
ship default OFF, matching the original rollout discipline of the three
reference offloads (shipped OFF, flipped ON later after a dedicated
compatibility audit). Flipping ON was tried during validation and
reproduced two distinct hazards against pre-existing fixtures that never
call slowlane_init: the already-known hang, and a new ASan SEGV in
commit_advance_locked (logged as bug-1452, not root-caused, deferred to
the future flip-to-ON audit). Both flags verified OFF and the full
976-test suite clean, then the committed state re-verified clean against
a live 10-round chaotic and 10-round sequential HA soak (zero job loss,
zero divergence, both PASS).
Only 21 of 86 test_*.c group functions called their own nested
UNITY_BEGIN()/UNITY_END(). Each nested call reset Unity's global
NumberOfTests/TestFailures counters, so controller_test.c's final
`return UNITY_END();` -- the value meson test actually gates on --
only ever reflected whichever small window of tests ran since the
LAST nested reset, silently discarding pass/fail evidence for
everything before it (measured: 16 of 972 total tests in one run).
The same nested-BEGIN calls also caused PASS/FAIL banners to show
the wrong source file for tests in files that don't reset it
themselves (Unity.TestFile just carries over from whichever group
last called UNITY_BEGIN()).
Fix: replace every nested UNITY_BEGIN() with UnitySetTestFile(__FILE__)
(sets file attribution only, no counter reset) and drop the matching
UNITY_END(); add the same UnitySetTestFile(__FILE__) as the first
statement to the other group functions that had neither. The 2
genuinely standalone binaries (test_job_array_sched_push.c,
test_job_array_apiserver_push.c -- each has its own int main(), not
registered via controller_test.c's TEST() macro) are untouched.
Verified: single consolidated summary now reads
"972 Tests 0 Failures 0 Ignored OK", exactly matching the
ground-truth RUN_TEST call-site count across all 83 registered
group files (976 total minus 4 belonging to the 2 standalone
binaries). Every PASS/FAIL banner now names its own true source
file. Full xce-build.sh all regression pass clean (Ok: 9, Fail: 0).
No production code touched -- test-harness plumbing only.
ha_send_snapshot_to_standby ignored the network send's return value in its
chunk loop, silently truncating a transfer on a mid-stream error while still
logging "complete" (bug-1386). Fixing the silent drop exposed a second,
independent bug in the same pipeline: ha_handle_snapshot_chunk appended
received chunks in arrival order instead of at their wire-carried
chunk_offset, so out-of-order delivery across the vtask pool corrupted the
reassembled file even though every chunk's bytes were individually correct
(bug-1389). Fixed by checking every fallible call in the send loop and
switching the receiver to pwrite-at-offset with a count-based completion
tracker.
Adds snapverify/snapdiff xce_test commands (offline checkpoint-file
structural validator and byte-level comparator) used to diagnose bug-1389 and
kept as standing diagnostic tools for future snapshot-transfer triage.
g_drive_async_configpush_offload flipped back ON after both fixes, validated
via 6-round chaotic + 3/3 force-snapshot soak (raft-drive-async task 3.3).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SDWVNQLKxqTVHh42cH7rV3
Both fixes are real and independently verified; the drive-async flags
(g_drive_async_snapshot_offload, g_drive_async_peerctrl_dispatch_enabled)
stay at their production-default OFF -- see the tasks.md session note for
why the flip itself doesn't land in this commit.
1. Snapshot-lane borrowed-endpoint hazard (task 3.2, bug-1197 family):
ha_snapshot_send_dispatch now takes endpoint_ref(ep) before submitting to
the slow lane, released on every non-lane terminal path and by
snapshot_lane_fn on completion. Reuses the general bug-1298 endpoint
refcount system (standby-ep teardown already routes through
endpoint_unref via cluster.c's endpoint_killer) -- a concurrent RDHUP
teardown can now only drop the owner's reference while a transfer is in
flight, never free the ep out from under it. New test:
test_snapshot_offload_holds_endpoint_ref_across_transfer (RED->GREEN).
2. Catch-up streamer WAL_CHECKPOINT bug (found while verifying #1 via a live
soak, pre-existing, unrelated to the drive-async flags): ha_stream_wal_
to_standby had no filter for WAL_CHECKPOINT markers -- local-only
bookkeeping that still consumes a real LSN slot via persist_write_
checkpoint_marker's own current_lsn++. It shipped one to a catching-up
standby, which correctly refused it (persist_wal_write_replicated
rejects type==WAL_CHECKPOINT) and got stuck retrying the same LSN
forever. Fixed by skipping WAL_CHECKPOINT entirely in the streamer loop,
mirroring the existing replay_wal/term-index precedent of treating
checkpoint-marker LSNs as invisible gaps. New test:
test_wal_stream_skips_checkpoint_marker (RED->GREEN).
Attempted flipping both drive-async flags ON after landing these fixes (the
"full fix, defer prod flip" decision's prerequisite -- 4.1+4.2 are green).
A 6-round --chaotic soak passed clean, but a --force-snapshot soak (a
genuinely empty node cold-start rejoin, the one scenario chaotic mode never
exercises) surfaced a THIRD, not-yet-root-caused issue: the freshly-wiped
node's own self-election appears to race cluster_init_phase2's vtask-pool
wiring, then the process hangs silently (no crash, no ASAN report) until
killed. Reverted both flags to OFF rather than ship an unproven state --
production behavior is unchanged by this commit. Full controller suite
green and both soaks (--force-snapshot, 6-round --chaotic) pass clean with
flags OFF, confirming no regression from the two logic fixes.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014dZVSx3CdBjys9BB6hqpxP
Adds checkpointTerm (@6, append-only) to the SnapshotTransfer wire
message. The leader stamps it via persist_entry_term(p, checkpoint_lsn)
when sending a snapshot; the standby reconciles it into its own
per-LSN term index (persist_reconcile_checkpoint_term) right after
persist_load_snapshot succeeds, before applied_lsn advances. This
authoritatively overwrites any stale local term a divergent
pre-snapshot entry left at the checkpoint LSN, closing the gap task
3.1's RED test proved (Expected 7 Was 3 -> now passes). Transport
stays persist_t-free; the reconcile lives in persist.c per the
existing dependency direction. Decode is auto-generated via capnp
mapname; only the hand-rolled encode path (request.c/typemap.h, needed
for the raw snapshot payload) required a matching manual update.
test_ha_core_safety 25/0, test_config_repl 66/0, no ASAN reports.
ha_handle_snapshot_chunk now logs whether a received checkpoint was
fully entity-restored or was a legacy position-only file (INFO level,
framed as an expected rollout state -- never an error, per design.md).
The rc-gates-applied_lsn control flow is byte-for-byte unchanged from
task 5.2 (confirmed by review) -- this task is purely additive
observability, matching design.md's own note that this call site
"needs no change" once persist_load_snapshot's gate is correct.
New test drives the legacy path end-to-end through the real production
handler (rc==0, file renamed, applied_lsn advances to the legacy LSN).
This completes the integration layer -- write path (jobs+queues),
restore-before-advance read path, and the production wiring are all in
place and independently reviewed. Only validation tasks remain (7.1
chaotic soak, 8.1 rollback compatibility).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JDYFbrgyDHbvNYcxApKhrX
Replaces the naive task-5.1 stopgap with the real restore contract:
detects legacy vs entity-bearing checkpoints by remaining file size;
restores every job then every queue status via restore_job/
restore_queue_state, in file order, with bounds-checked length-prefixed
reads; only after every entity restores successfully does
current_lsn/checkpoint_lsn commit to the checkpoint's position. Every
failure path (bounds check, decode, restore error, unrecognized
format_version) returns before that single commit point -- position is
provably untouched on failure, never partially advanced.
Also fixes the pre-existing restore_job decode leak (job.c): job_init
deep-copies submit (never nulled) and MOVE_PTRs allocs/pidinfo/
pend_reasons (nulled on the one path that runs) -- free_Job(&j) is safe
unconditionally on every reachable return path (EEXIST early-return,
create_job success, create_job failure), verified against the exact
generated free_*_ptr null-check guards.
Two pre-existing test_config_repl.c wire-protocol tests needed their
synthetic garbage snapshot bodies updated to a well-formed empty-entity
tail, since load_snapshot now genuinely parses past the legacy header
(previously ignored); their actual assertions (chunk-reassembly
correctness) are unchanged.
This is the exact function/contract that caused task 2.2's rejection
(position advancing before restore validated). Independent review
traced the memory-safety fix through the generated capnp code field-by-
field, confirmed the test_config_repl.c change doesn't weaken any
assertion, and confirmed restore_queue_state's ENOENT-aborts-the-whole-
checkpoint behavior is faithful to design.md's unconditional contract
(flagged as a watch-item for task 7.1's soak, not a defect).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JDYFbrgyDHbvNYcxApKhrX
The bug-850/851 forward-gap contiguity guard (persist.c:839, added in 20e59d0b)
correctly rejects a catch-up entry whose lsn is ahead of the WAL tail (-EAGAIN).
7 test_wal_catchup_* tests in test_config_repl.c predate the guard and applied
non-contiguous LSNs (42, 10-12, 1000+) to a fresh persist (current_lsn=1),
failing deterministically. Seed current_lsn to each test's first applied LSN so
the in-order stream is contiguous (mirroring the real catch-up streamer); the
apply->advance path and all asserted semantics are unchanged. Test-only; the
production contiguity guard is untouched. 179 controller tests, 0 failures (x3).
Two coupled fixes for a live commit-stall (committed_lsn pinned at the own-term
NOOP while a 3-node cluster was durable to LSN 5 — jobs acked but never committed):
bug-991: the WAL catch-up applied_lsn was advanced to lsn+1 (next-to-apply) in
the three live/catch-up apply paths, but recovery/checkpoint/init and the leader's
catch-up streamer treat it as last-held. The over-advertise made the streamer skip
an LSN -> library logOk wedge -> no WalAck. Fixed to last-held (= lsn).
Option A (design reconsideration of REVIEW ISSUE 3): removed the
committed = min(durable-majority, raft_commit_index) ceiling. Under single-writer
the durable-majority watermark is already (term,lsn)-current-term-safe (term-carrying
replication + (term,lsn) reconcile/truncate-before-durable + own-term NOOP gate +
post-election truncate-to-safe), so the library commit_index was a redundant,
starvation-prone gate that pinned committed below the safe durable majority whenever
the library lagged. The durable-majority barrier + own-term writable gate are now
authoritative; raft_commit_index is inert-advisory.
Safety: reviewer-verified the durable-majority watermark is (term,lsn)-safe and
Figure-8 holds via the own-term gate (new RED->GREEN test); bug-851 cannot recur.
Live: commit trace 4->5 + walcompare committed-prefix identical across 3 nodes.
177 unit tests pass.
Wires config_committed_marker to a production consumer (config_activate_committed):
verifies pushed bytes' sha256 against the committed marker before activation, fences
(loud, non-serving, stay-alive) on mismatch, and activates the latest committed marker
on recovery. Enforced via ha_dispatch_gate + promotion gate.
Fixes bug-981: a 2nd+ config upgrade could permanently fence a standby on a
push-before-commit ordering. Adds an off-iomgr delaymgr retry scheduled from the
commit-advance hook (atomic read + non-blocking enqueue only on the ACK thread) that
re-activates and clears the stale fence once the new marker commits and bytes verify.
Wires do_upgrade_config_with_bytes to append WAL_CONFIG_MARKER through
raft_log_append (live term-stamped consensus record), demotes committed_config_tag
to a non-authoritative cache, and derives the committed config from the latest
committed marker. Preserves the derive across checkpoint compaction via an optional,
backward-compatible config-ref tail in the snapshot sentinel.
Standby sends WalAckReply via xce_reply after each successfully
applied WAL entry. ha_apply_wal_catchup_entry signature extended
with endpoint_t* and cluster_t* parameters. walackreplymsg union
arm added to RequestReply capnp schema and xce_reply_t. Error
entries skip ACK. Dispatch gate test confirms OPCode_walCatchupEntry
allowed in CTRL_STANDBY/ELECTING/INIT.
Co-Authored-By: Claude Sonnet 4.6 (1M context) <noreply@anthropic.com>
6.3: Fix single-node bug — ha_compute_safe_committed_lsn now returns
self_lsn instead of 0 for n_peers=0 (prevents WAL truncation on
single-node re-election). Add self_lsn/self_tag to ha_elect_ctx_t,
populated unconditionally in ha_start_election_async. All 3 test
scenarios pass under ASAN.
6.4: Add test_snapshot_recv_128kb_two_chunks (128KB snapshot in
2x64KB chunks, verifies size and applied_lsn); 4 other test cases
already existed from tasks 3.5c/3.5d. All ASAN-clean.
- Strip handle_ctrlhello: remove repl_add_standby, WAL streaming,
snapshot check, push_config_to_standbys, and CtrlHelloReply
- Keep only: set primary_ctrl_fd, call ha_on_heartbeat_received,
arm ha_arm_heartbeat_timeout_vtask, log INFO
- All replication decisions now handled by heartbeat decision loop
- Test: call with NULL repl + config_tag mismatch → no crash, no repl
messages enqueued, primary_ctrl_fd set correctly
- Add ha_repl_send_snapshot_hook seam in ha.c/ha.h for XCE_TESTING
- test_dispatch_repl_action_send_snapshot: verifies SEND_SNAPSHOT
decision triggers hook when standby_lsn < oldest_wal_lsn
- test_snapshot_recv_two_chunks_assembles_and_renames: verifies standby
assembles snap.part across chunks and renames on isLast=true
- test_snapshot_recv_reconnect_discards_snappart: verifies O_TRUNC
semantics on chunk_index==0 restart after reconnect
- All tests pass under ASAN
- SEND_SNAPSHOT uses checkpoint_lsn (not committed_lsn) for file lookup
- ha_send_snapshot_to_standby stats file for actual total_size
- ha_compute_oldest_wal_lsn scans WAL dir for min segment LSN
- Removed hardcoded 131072 and oldest_wal_lsn=0 placeholders
ha_stream_wal_to_standby() reads WAL from committed_lsn range, accumulates
entries to 256/64KB per batch, enqueues all via xce_request() (non-blocking).
Partial final batch sent immediately. Wired into STREAM_WAL case.
3 tests: 500-entries/2-batches, partial batch, empty range.
Fixed stale task-number comments per review.
OPCode_nop handler now sends stateReport {applied_lsn, config_tag}
instead of nodata. Function in ha.c for unit-test linkability.
Two tests: warm state and zero-state fresh standby (Req 1.4).
Extend ha_apply_wal_catchup_entry with batch branch:
- Check n_entries > 0, iterate entries[] list in order
- Apply each via apply_wal_entry(); skip NULL/errors without crash
- Advance applied_lsn once after full batch (not per-entry)
- n_entries == 0 falls through to task 2.1 single-entry path
4 new unit tests covering full batch, partial batch, error skip, fallback
Replace stub with ha_apply_wal_catchup_entry() calling apply_wal_entry().
CAS-advance applied_lsn on success; log ERROR and skip on failure.
Standby stays in CTRL_STANDBY throughout. 3 new unit tests.
xce_replconfig_reply_raw() - primary sends reply with real bytes via endpoint
xce_replconfig_req_ssl() - standby sends request over raw SSL socket
xce_replconfig_reply_ssl_decode() - standby decodes reply from raw SSL
xce_upgrade_config_req_extract() - documents architectural limitation; returns -ENOTSUP
xce_upgrade_config_req_extract_raw() - extract bytes from raw packet for OP_upgradeConfig
Same bypass pattern as existing xce_replconfigpush_req_raw(): build the
capnp message directly via capn_new_list8 + capn_setv8, sidestepping the
encode_Data_ptr path that routes raw bytes through xce_data_t (a
discriminated cluster-data union that cannot carry raw byte arrays).
Unblocks handle_config_request() and do_one_config_fetch() wiring.
Task A research finding: xce_upgrade_config_req_extract(xce_request_t*)
is unimplementable because xce_decode() calls capn_free() before any
handler runs, and decode_Data_ptr converts the wire-format List(UInt8)
into a zero-filled xce_data_t. Task D must capture the raw io_packet_t
bytes before xce_decode tears them down, then call the _raw variant.
Replaces blocking pthread_join() per thread with a CLOCK_MONOTONIC
deadline + 5ms poll loop. CONF_PUSH_TIMEOUT_MS (500ms) now enforced.
Matches design §6.3 aggregate timeout guarantee.
- Add done field to push_ctx_t; push_thread sets it on exit
- Add static wait_all_with_timeout() before push_config_to_standbys()
- Wire push_config_to_standbys() to use wait_all_with_timeout()
- Add #include <stdatomic.h> to config_repl.c
- Guard push_ctx_t local typedef with #ifndef XCE_TESTING
- Expose push_ctx_t and wait_all_with_timeout_for_test() in header
under XCE_TESTING for unit test access
- Add test_wait_all_with_timeout_slow_threads (timeout fires, acked=0)
- Add test_wait_all_with_timeout_fast_threads (all complete, acked=3)
- Update design doc §6.3 with actual implementation signature and
5ms poll interval note
load_primary_config() reads from workdir/name/conf — conf_save_config()
was writing to workdir/conf. Latent bug: would have corrupted upgrade
restart cycle once Task 11 wired the upgrade path.
Update all conf_read_current_filename, conf_get_saved_tag, and
conf_check_stale calls in the test suite to use the corrected
effective_dir (workdir/name) path structure. Add new test
test_conf_save_config_path_consistency that explicitly verifies the
written path matches what load_primary_config() reads.
- load_primary_config(): resolves conf/current, reads raw bytes, computes
SHA-256 tag, decodes Cap'n Proto via load_cluster_config_from_file(),
checks reserved names, sets config_generation, checks staleness
- myconf_fini(): frees conffile and cluster_config (calls free_ClusterConfig)
- Remove static cf global from myconf.c; get_default_conf() now uses a
local struct cluster_configuration* via load_cluster_config()
- Add load_primary_config_for_test() under XCE_TESTING in config_repl.c
to test path resolution without triggering FATAL
- Add xce/cluster_def.h include to config_repl.c and test_config_repl.c
so cluster_t is complete when XCE_TESTING is active
- TDD: test_load_primary_config_missing_returns_error passes (18/18)
