bug-1554: init_host_attrs() replaces hardcoded placeholder stubs with real
detection -- maxswap from sysinfo()'s totalswap (reusing the same syscall
snapshot already taken for maxmem), maxtmp from a fresh statvfs("/tmp")
total-capacity measurement. No synthetic fallback on detection failure, so
a system with swap genuinely disabled correctly reports 0.
bug-1776: the scheduler simulator's "info worker" assigned-jobs listing now
annotates a job consuming more than one "slots" unit (e.g. "jobid*2"),
using per-host allocation data that was already being walked but discarded.
Falls back to the pre-existing per-job listing when jobs on the same worker
have differing slot counts, since a single suffix on a compressed range
would be ambiguous.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Hb6Edtj4KbS8CrgEWYdA2E
Adds white-box tests for job_start_remote_task()'s launch-type gate
(MPI types defer to their own remote-launch mechanism; default type
fans out via xcecli_runtask() across every allocated host, verified
via a #define-before-#include mock capturing taskrun/taskhost
contents) and create_mpi_cmdline()'s host-list/command construction
for openmpi and mpich. Zero production code changes -- this closes a
previously zero-coverage gap in existing, unmodified worker code
(Requirement 4.4), independent of this feature's resreq wiring work.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XYdtrEWWZfKRRGED7raEYg
Extends task 4.3's post-join gating to resource_sync_thread()'s
independent periodic reporting pthread, closing the Requirement 3.8 gap
where load-indices sends could interleave with an in-flight job-state
reconciliation report. Also fixes two pre-existing latent bugs
(bug-1756, bug-1757) in resource_sync.c that blocked a truthful RED/GREEN
signal for the new tests.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019ypUeKgbAqLWUkaSJ79poN
Arm a reconciliation round in apply_join_state() the moment a worker
host becomes connected (first join, reconnect, or failover-reconnect -
all routed through the same shared call site, Req 1.1-1.3), then send
the query from on_worker_join() strictly after the join reply and
existing config push (Req 2.1-2.2), verified via a structural test
that reads real wire order off the endpoint queue.
Also closes Req 3.7's config-delivery seam end-to-end: worker_resync_
window_ms now rides the existing Conf4Worker push (clustername
precedent, no new opcode) and the worker applies it to its retention
window on receipt.
Fixes bug-1752: myreq_handler had no OPCode_push dispatch case at all,
so every config push - including the pre-existing clustername field -
was silently discarded. Confirmed harmless until now (clustername was
never read anywhere in src/worker/); closed narrowly for
worker_resync_window_ms only.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y4M5MJM2zK6nU43da267Ku
Add OPCode_jobStateQuery dispatch to myreq_handler with multi-page query
reassembly, routing to task 4.2's xcecd_resync_answer_query() (Req
8.1, 8.3). Gate the worker's resumption of normal post-join operation
on a resync_pending flag until the full report has sent (Req 3.8).
Fixes bug-1749 (xcecd_resync.c was never added to the worker's
production source lists - task 4.2's build only ever exercised it via
the test binary's white-box include).
Round 1 review caught bug-1750: the gate sat as checking_connection()'s
entry guard, so a connection drop mid multi-page query left
resync_pending stuck forever, permanently disabling the worker's only
reconnect mechanism (Req 6.1 violation). Round 2 narrows the gate to
guard only the rejoin action, and resets it from xcecd_on_reconnect()
so a stalled query can never wedge it past one reconnect cycle.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y4M5MJM2zK6nU43da267Ku
Classify each queried job ID as running/finished-ok/finished-fail/
unrecognized (Req 3.1-3.3, 3.6), report unqueried running/recently-
finished jobs as extras, and send both via task 1.4's paginated wire
helper (Req 8.2, 8.3). Composes correctly with the already-implemented
controller-side consumer (resync_apply_report).
Adds xcecd_finished_job_retention_snapshot() to xcecd_worker_utils, a
small additive companion needed to enumerate all retained jobs for the
extras set (task 4.1 only exposed single-jobid lookup).
Folds the still-open OPCode_jobStateQuery receive-dispatch wiring gap
into task 4.3's scope in tasks.md, since 4.3 already needs the real
receive path to implement its post-join gate.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y4M5MJM2zK6nU43da267Ku
Retain a job's exit status/code/true finish time for a configurable
window after update_worker_status() detects its exit, before
cleanup_worker_list() would otherwise discard all trace of it
(Requirements 3.4, 3.5, 3.7). Hooked into the single choke point both
production exit-detection paths (libuv IPC callback, dbus polling)
converge through, so retention happens-before any reap regardless of
which mechanism is active.
Also prunes on retain (not just on lookup), closing a review finding:
lookup currently has zero production callers until task 4.2 lands, so
without this the store would grow unboundedly for the daemon's uptime.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y4M5MJM2zK6nU43da267Ku
A JOB_EXITED status could mean either a deliberate, expected termination
(worker_signal_callback() only ever sends SIGTERM/SIGKILL to cancel/
force-kill a job) or a genuine unexpected crash signal. Both logged at
ERROR, drowning real crashes in expected-cancellation noise. Added
job_exit_log_level(): exit_code == 128+SIGTERM/SIGKILL logs at INFO
(matching process_exit_callback()'s existing plain-INFO treatment for
the same case), anything else stays ERROR. Verified: worker test suite
5/5 including the new test_uv_ipc_job_exit_severity coverage.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019QxaSzHRB7pmYFp4cVnwkA
Every early-exit branch in the worker_list scan either re-tested the same
node forever (bare `continue`) or returned out of the whole function on the
first DONE/EXITED worker, so job array elements past the head of the list
never got their on_job_start report. Capture `next` before touching each
node and always advance to it. Affects xcecd_virtual and real xcecd alike
(same DBUS_MANAGER-gated function).
Also records a roadmap follow-up (xcecd_virtual concurrent-job support,
MXJ > 1) discovered while investigating this bug.
collect_load_indices() (resource_sync.c) tagged every periodic
mem/r1m/r15m/r15s/ut/pg/ls/it/swp/io/tmp report with gethostname()'s
raw OS/container hostname instead of the worker's own join identity
(xcecd_ctx.virtual_name, the -n/--name value). Every other worker-keyed
lookup downstream (scheduler's sched_get_worker(), and the same
HOOK_DETAIL_RESOURCE_UPDATE payload forwarded on to the Go apiserver)
matches by that join identity, so the mismatch silently dropped every
periodic resource report for the real worker.
Also adds a startup INFO log (main.c) naming the resolved job picker
plugin, used to rule out a legacy-picker hypothesis while chasing a
related (still-open) dispatch issue.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Confirm connector thread is isolated from worker_process_update() (main
thread) and resource_sync_thread() (own thread) via code read plus a real
pthread concurrency test. Add unit and live 3-node E2E coverage for
candidate/reconnect behavior, all-candidates-unreachable diagnostics, and
liveness cadence under concurrent reconnect.
The E2E run surfaced two production bugs the 2.1/2.2 unit tests missed:
xcecli_start() resets the reconnect callback to NULL after it runs, so
registering it before xcecli_start() silently no-ops the whole rejoin
mechanism; and a successful worker join returns its assigned slot index
as reply.status (any rc >= 0), not always exactly 0, so checking_connection()'s
rc == 0 success check never fired on a real non-zero-slot join. Both fixed,
plus per-candidate names added to the all-unreachable failure log.
Root-check bypass needed for the E2E run is gated at compile time via the
existing VIRTUAL_CLUSTER flag, not a runtime env var, so the real xcecd
binary's root requirement has zero bypass surface.
Thread cluster_cfg by value through xcecd_config_t -> xcecd_context_t ->
cc_ctx so it's populated before controller_connector_start() fires the
first join, instead of after xcecd_start() returns. checking_connection()
now retries a failed post-reconnect xcecli_join() on the next liveness
probe instead of leaving needs_rejoin cleared on mere attempt.
Replace worker's separate default/single-host and multi-candidate connect
branches with one path: synthesize-or-accept a candidate list, validate,
convert via xce_cluster_config_to_client_config(), connect once. Register
a flag-only rejoin callback (no I/O, no client-lib reentry) and remove the
liveness probe's bounded give-up so the library owns retry/recovery.
