An idle scheduler (nothing queued to publish) never noticed a dead
controller connection: sched_needs_rejoin was only ever set as a side
effect of an active client-library call, and an idle round makes none.
After any controller failover with nothing already in flight, jobs
submitted to the new primary stayed PEND indefinitely.
Adds xcecli_is_connection_broken() (libxce) -- a pure, socket-free read
of the transport's already-async-maintained dead/alive flag, set for
free by the existing RDHUP disconnect handler with zero application
calls. sched_check_pending_rejoin() now retries xcecli_join() on either
the existing reactive flag or this new passive signal, so a healthy
idle scheduler still makes zero extra network calls while a genuinely
dead connection self-heals within one ~1s round -- live-verified
against a 3-node HA cluster (rejoin fired ~300ms after new-primary
election with nothing submitted in between).
Also closes out bug-1735 (job memory/CPU usage reporting): confirmed
already fixed on this branch since 2026-08-30, just never marked in
the bug log.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XYdtrEWWZfKRRGED7raEYg
xcecli_jobsubmit() could return rc>=0 (success) while leaving its *jobid
output parameter at 0, reproducible under concurrent client load
immediately after a fresh single-node election (~1-3/9 clients per round
in the original repro).
Root cause: XCECLI_FAILOVER_CALL's idempotent-replay rule
(client_failover.c's xce_failover_classify) normalizes a retried resend
that hits the server's EEXIST/inflight-collision rejection into overall
success -- but that rejection reply carries no payload
(handle_jobsubmit's EEXIST branches reply with RequestReply_data_nodata,
job.c), so xce_jobsubmit() never populates *jobid on the winning
attempt, nor did it on the earlier failing attempt (raw status was
already negative).
Adds jobsubmit_finalize_jobid() (client_internal.h/client.c), called
from xcecli_jobsubmit() right after XCECLI_FAILOVER_CALL returns. Sets
*jobid = submit->jobid (the client-generated id already on the wire --
the controller commits/echoes this exact value on every genuine success
reply, bug-786/job.c:1439) whenever the overall call succeeded,
otherwise leaves it untouched. Placed at the jobsubmit-specific wrapper
layer, not the generic classify/decide layer, which stays fully generic.
3 new socket-free unit tests in test_libxce_retry.c (following this
codebase's direct-state-simulation style for I/O-adjacent logic).
Live-validated: full ASAN rebuild clean, libxce test suite 1/1 OK with
all 3 new tests passing, and a 5-round/45-client concurrent-submit
repro against a live single-node cluster showed 0 "no clean ack"
failures (vs. 1-3/9 per round pre-fix).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Implements the scheduler's first request-reply opcode (OPCode_schedAdmin).
sched_handle_admin_request() (handler.c) decodes SchedAdminRequest and
dispatches by action: recordStatus answers synchronously (pure read);
recordStart/recordStop are deferred onto the existing pend_updates queue
(XCE_SCHED_OP_ADMIN_RECORD) since sched_record_start()'s snapshot call
requires the session_active==0 precondition only guaranteed on the driver
thread, not the async request-handling thread. driver.c's
xce_sched_driver_translate_pending_events() performs the deferred action
and sends the reply via a new xcecli_reply_schedadmin() (client.c/client.h),
correlated by seq copied before the original request is freed.
Adversarial review found a genuine cross-thread race: sched_record_status()
read driver-owned recording state (including a pointer the driver thread
frees) from the vtask thread with no lock -- the codebase's first such
race, missed by ASan (doesn't detect races). Fixed with a dedicated
record_lock scoped strictly to in-memory field access, never spanning file
I/O; sched_record_status() now strdup()s under the lock instead of
returning a borrowed live pointer. Verified with a real two-thread
lock-contention test (independently confirmed non-vacuous by removing the
lock and observing the test fail) plus a deterministic use-after-free
reproduction.
26/26 scheduler suite, clang-format clean.
Build the live 3-node chaotic-multi-kill config-upgrade soak scenario
(run-ha-soak.sh --config-upgrade) required by Requirements 4.1, 4.3, 6.1,
6.4. This needed genuinely new client-side infrastructure: a hand-rolled
capnp send path for OP_upgradeConfig (the auto-generated encoder is a
no-op for its Data fields, worked around the same way
xce_replconfigpush_req_raw already does), plus cmd_hostctrl/cmd_upgradeconfig
CLI commands.
Building and running this live surfaced two real production bugs, both
fixed here:
- bug-1468: an unrelated prior commit inverted OPCode_upgradeConfig's
primary/standby dispatch guard in cluster.c, making config upgrades
unreachable from any network client.
- bug-1469: apply_committed_entry's WAL_CONFIG_MARKER case never called
config_activate_committed(), so the node that originates a config
upgrade never refreshed its own in-memory state as part of committing
it. Killing that node before some later, unrelated event happened to
refresh it left its checkpoint permanently stale -- the first live,
empirical reproduction of bug-857's originally hypothesized failure
mode. Fixed by activating before the marker-triggered checkpoint write,
since checkpoint content is built from live runtime tables that only
reflect the reload after activation runs.
A separate, narrower checkpoint divergence (bug-1471, not config-related)
remains open and still blocks a clean soak PASS -- task 8.6 stays
in-progress until it's resolved.
xcecli_joblist/reslist/workerlist/resval/jobinfo return a non-negative ROW
COUNT on success (rc = getreply.nrows), not a 0/status code. They were
wrapped in XCECLI_FAILOVER_CALL, which unconditionally classifies the raw
return value against fixed constants (E_XCE_* and POSIX errno magnitudes
accepted in either sign) — a row count that happens to equal one of those
constants (e.g. exactly 111 jobs == ECONNREFUSED) was silently
misclassified as a transport failure, forcing a spurious
xce_failover_rotate() on every call with that exact count. In
/xce-test-ha's arithmetic progression (3 + 3*round) this hit at round 36,
burning the retry budget on self-inflicted churn until it coincided with
a genuine transient and surfaced a real ECONNRESET to the caller.
Add XCECLI_FAILOVER_CALL_COUNT: only enters the retry/classify loop when
EXPR's raw result is negative; any non-negative result (0 or a genuine
row count of any magnitude) is unconditionally success. Switch the five
xce_get-family wrappers to it. Verified via 40-round sequential and
40-round chaotic HA soak past round 36, zero committed-job loss.
socket_connect sets O_NONBLOCK before connect and bounds the attempt with
poll(timeout); new connect_timeout_ms param (0=DEFAULT_CONNECT_TIMEOUT_MS);
all 5 callers updated (ha.c x3, client.c, xcectx.c). Revalidation Trigger:
shared netio helper signature changed. Broad build links all components;
xcelib_test 278/0, controller_unit_test 194/0. 1.4/1.5 unit tests satisfied
by the TDD output of 1.2/1.3 (test_slowlane.c, test_netio_bounded_connect.c).
Add the full call chain for host control operations from the Go API
server through the C library to the controller:
- schema/controller.capnp: HostControl struct + hostctrlmsg @21
in Request.body union
- include/typemap.h: xce_hostctrl_t* hostctrlmsg in body union
(placed after @20 clrpreasonmsg, matching capnp ordinal)
- include/client.h, xceapi.h, request.h: declarations for
xcecli_hostctrl, xce_hostctrl, xce_hostctrl_req
- lib/client.c: xcecli_hostctrl (validate + delegate to xce_hostctrl)
- lib/xceapi.c: xce_hostctrl (validate ctx state + send + wait reply)
- lib/request.c: xce_hostctrl_req (validate hostname/empty/nil,
accept only HOST_OPEN/HOST_CLOSE, reject HOST_TAG/UNTAG)
- lib/helper.c: Request_body_hostctrlmsg cases in
xce_request_body() and xce_request_msg_name()
- controller/cluster.c: OPCode_hostcontrol dispatch
- controller/include/cluster.h: do_hostcontrol_op declaration
- controller/worker.c: do_hostcontrol_op + fix pre-existing
goto-clean bug in worker_ctrl that leaked write lock and
reference on HOST_OPEN/HOST_CLOSE no-op paths
TDD: 8 xce_hostctrl_req validation tests (null ep, null ctrl,
null/empty hostname, HOST_DO_NONE no-op, HOST_TAG/UNTAG reject,
negative action reject, HOST_OPEN/CLOSE accept via xce_request).
116/116 xcelib tests pass. CGO_ENABLED=0 Go backend tests pass.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
