sched_reconcile_job_resource_usage() was only reachable from
sched_apply_job_rusage() (scheduler.c's sched_update(), which has no live
caller), so real-usage reconciliation never actually ran outside tests.
Wire it into core_events.c's XCE_CORE_EVENT_JOB_RUSAGE handler instead,
the actual live path shared by both normal-mode (driver.c) and sim/replay
mode (sim_loop.c). Adds link-satisfying stubs to the testsuite files that
#include core_events.c directly.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y4M5MJM2zK6nU43da267Ku
Replaces sim_loop.c's monolithic xce_core_go() with the same
xce_core_begin_session() -> sched_account_jobs() -> xce_core_signal_go()
sequence driver.c already uses for normal-mode rounds, opening the same
interleaving window and calling the now-core-level accounting service
(task 1.1) at the same relative position. Error-handling for a failed
session start is preserved byte-for-byte (same cleanup, same rc source).
Both interactive and batch simulation runs go through this one call site.
This is bug-1613's wiring half: sim_loop.c now calls sched_account_jobs()
at all (it never did before). resInUse is still zero end-to-end after this
task alone, because job->accounts is never populated by any live path in
sim mode yet -- that's Recorded-Decision Reconciliation (tasks 2.2-2.4),
not yet implemented; a comment marks where it slots in.
Adds a call-count/session-window regression test proving the wiring itself
(RED-phase reproduced live via git stash + rebuild, matching bug-1613's
symptom exactly). 8 sibling white-box test files needed a link-satisfying
sched_account_jobs() stub, discovered via actual linker errors.
45/46 scheduler tests pass; the 1 failure is pre-existing bug-1560
(unrelated).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bugs fixed, discovered across a day of live-operator testing against a
real deployed cluster:
- bug-1584: clock anchors never initialized to real wall-clock values,
timestamps showed system uptime instead of Unix epoch.
- bug-1585: heap-use-after-free in the normal-mode driver's periodic
resval update path -- core_events.c's RESVALS_FULL/_DELTA handlers do a
shallow zarray_put() of the wire-decoded xce_val_t*, but driver.c's
release_translated_payload() unconditionally freed the same decoded
array right after, so the next periodic report for the same
worker+resource triggered a UAF read via kill_sched_resval(). New
regression test: test_resval_ownership.c.
- bug-1587/1588/1591: raw-ns/raw-uint64 jobid/timestamp prints across the
REPL/SIM family converted to the same human-readable formatting already
used elsewhere (fmt_jobid(), timestamp formatting).
- bug-1590: repl_info.c's XCE_VAL_NUMERIC checks corrected to
Value_u_fvalue, fixing `info worker`/`info resource` falling back to
0.00 for real numeric resvals.
task 12.5 (Req 5.22 amendment) -- five REPL gaps surfaced by a live
operator session, each with its own bug id:
- bug-1594: `continue`/`step` reaching EOF with no breakpoint hit now
re-enters the REPL via xce_repl_on_replay_complete() instead of exiting
the process; step/continue issued after replay is already complete
re-prompt instead of silently exiting.
- bug-1595: `step`/`continue` now echo each input event (not just
decisions) via repl_print_event_summary(), in real event/decision
order.
- bug-1593: `info resource <name>|all` now reports resource definition
metadata restricted to XCE_RESF_GLOBAL/XCE_RESF_SHARED resources, read
from core->sharedInst, instead of aggregating host-based resources
across every worker.
- bug-1596: repl_split_tokens() strips one matching pair of surrounding
quote characters from each token.
See requirements.md's Req 5 AC 22 "Amendment (2026-08-19)" for the full
rationale on each of the five task 12.5 gaps.
Full scheduler suite green (41/42; the one remaining failure,
test_recordstart_symlink_escape_replies_error, is the pre-existing
unrelated bug-1560).
xce_scheduler -i -s <replay>: WARN "failed to resolve job picker
plugin (rc=-2)" on load, and every job already present in the
replay file's INITIAL snapshot stayed PEND forever -- never even
reached the picker, let alone got dispatched.
Root cause: sched_sim_driver_start() (sim.c) loads the initial
snapshot via xce_sched_core_load_snapshot() BEFORE any picker
plugin is registered (sim.h's own documented "Known scope
boundary" -- only the picker's NAME is threaded through from the
ReplayHeader). sched_resolve_job_picker() therefore always returns
-ENOENT there, and xce_sched_core_load_snapshot()'s own
picker-rebuild walk (on_queue_update/on_job_push per queue/job) is
silently skipped. The real builtin_fcfs picker only gets registered
moments later in sched_sim_driver_run() -- but nothing then replayed
that rebuild walk, so any job/queue from the INITIAL snapshot (as
opposed to one arriving later via a ReplayEvent, which correctly
reaches the picker through xce_core_push_events()'s own picker!=NULL
check) was permanently invisible to next_job().
Fixed by a new file, sim_picker.c: sim_bootstrap_picker() (replacing
sim_loop.c's sim_register_default_picker(), moved out because
sim_loop.c was already at its own documented 800-line "zero
line-budget headroom" cap) registers the picker AND then replays the
missed rebuild walk against it. Wired into scheduler_srcs,
sched_sim_isolation_lib, and all 9 white-box test TUs that #include
sim_loop.c directly.
New regression test (test_sim_event_loop.c): a job baked into a
fixture's INITIAL snapshot (not a ReplayEvent) now gets a live PEND
decision. RED confirmed by temporarily no-op'ing the rebuild walk
(test failed as expected), GREEN with the real fix. Full scheduler
suite green (41/41, excluding the pre-existing unrelated bug-1560).
Note: sim mode still never DISPATCHes (only PENDs) -- that is a
separate, intentionally out-of-scope gap (real resource-matching
allocation belongs to the not-yet-designed scheduler-allocation
spec), not addressed here.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds `snapshot [FILE]` and `set speed|output|verify ...`/`info config`
(Req 5 AC 22 "Snapshots"/"Simulation parameters") to the interactive
simulation REPL.
`snapshot` reuses sim_record.c's existing sim_record_write_header_and_
snapshot() (task 11.5) rather than reimplementing capnp encoding, so
the produced file is genuinely loadable via a fresh --sim invocation
-- the task's own Observable. `set speed`/`set output`/`set verify`
mutate fields sim_loop.c and core_clock.c already read fresh on every
event/session, so no new hook points were needed and sim_loop.c stays
untouched at exactly 800/800 lines (this project's hard per-file cap).
New repl_params.c is a fourth sibling in the repl.c/repl_break.c/
repl_info.c split (task 12.2's precedent) -- neither existing file had
headroom left under the 800-line cap for this task's own logic.
Scheduler suite: 36/36 clean (was 35/35). Review independently
reproduced the RED-phase probe and additionally verified the
snapshot round-trip Observable is non-vacuous.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JPPXeKSUXUqcqvzNXY1rzJ
Adds the interactive simulation REPL's breakpoint and state-inspection
commands (Req 5 AC 22): `break <event_type> [key=value ...]` / `info
break` / `delete <id>|all` on event and decision types, and `info
session/job/queue/worker/resource/summary`.
repl.c (370 lines after task 12.1) couldn't hold this task's full
surface under the project's 800-line cap, so it's split three ways
(matching the snapshot.c/snapshot_wire.c/snapshot_load.c precedent):
repl.c (execution control + dispatch), repl_break.c (matching/CRUD +
the three new driver-facing hooks), repl_info.c (info dumps), sharing
state via repl_internal.h. sim_loop.c gained 3 new bare hook calls
(repl.h inline wrappers, same pattern as task 12.1's two) at the
points design.md's pseudocode requires -- per decoded event before it
joins the batch, per session boundary, and per drained decision --
landing sim_loop.c at exactly 800/800 lines.
Two real bugs found and fixed during development (bug-1506, bug-1507):
an uninitialized xstr_table left breakpoint filter fields silently
NULL instead of failing loud, and repl_breakpoint_free() called a bare
free() on an RTTI-refcounted makeString() string, corrupting the heap.
Review found one gap: `info job` printed only a resreq presence flag
instead of the actual resreq text, when format_resreq() already
existed in this repo for exactly this purpose. Fixed to match.
Scheduler suite: 35/35 clean (was 34/34). RED-phase evidence (2 real
bugs plus 2 synthetic probes, all reverted with confirmed zero
residue) recorded in tasks.md.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JPPXeKSUXUqcqvzNXY1rzJ
Adds the interactive simulation REPL's execution-control slice (Req 5
AC 22): a single-threaded input loop (readline-based) supporting
step [N], continue, quit, and help, pausing before the first replay
event and blocking the driver loop while active.
Review round 1 raised two findings, both resolved here:
- GNU readline (GPL) was linked directly into xce_scheduler, a shipped
production daemon. Switched the whole project to libedit (BSD) for
line editing -- scheduler and controller (xce_test) both now use
editline/readline.h, API-compatible (readline()/add_history()).
- Getting a clean regression run after the libedit swap required a
full clean rebuild, which exposed a genuine pre-existing SIGSEGV
(bug-1504): SnapshotData.internalState was a capnp Data field, and
this codebase's capnpc-c backend silently no-ops Data-field
encoding without zero-initializing the caller's stack struct,
leaving an uninitialized capn_ptr written onto the wire. Fixed by
switching internalState to List(UInt8) (with a new internalStateLen
wire field), matching the working FetchFileReply.content/bytesRead
precedent -- no hand-written accessor code needed.
A second, unrelated instance of the same bug class was found in the
controller's WAL-catchup path (WalCatchupEntry.payload) and
deliberately left unfixed as bug-1505, out of scheduler-core's
boundary; needs its own project-wide Data-field audit.
Scheduler suite: 34/34 clean. RED-phase reproduction recorded in
tasks.md (repl_should_pause() step-budget check disabled -> 2/4
tests fail as expected -> reverted -> 34/34 green).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JPPXeKSUXUqcqvzNXY1rzJ
