#if !defined(_REPL_H_)

#define _REPL_H_ 1

#include "sim.h"

/*
 * repl.h - interactive simulation REPL (scheduler-core spec, Req 5 AC 22).
 * New file per design.md's File Structure Plan ("repl.c -- NEW (Phase 3):
 * interactive REPL command loop (Req 5 AC 22)"), Phase 3, sibling to
 * sim.h/sim.c/sim_loop.c. Task 12.1 built execution control (step/continue/
 * quit, pre-replay pause); task 12.2 (this revision) adds breakpoints
 * (event/BEGIN_ROUND/DECISION, with key=value filters) and the `info`
 * state-inspection command family.
 *
 * This header declares repl.c's driver-facing entry points, plus `static
 * inline` wrappers that fold the `sim->interactive` gate INTO the header
 * itself. That inline-wrapper indirection is a deliberate, judgment-based
 * deviation from this file family's usual "extern declared where consumed,
 * no dedicated header" convention (sim_verify.c/sim_record.c/
 * recording_session.c's entry points are all extern-declared directly
 * inside sim_loop.c -- see that file's own header comment): sim_loop.c sits
 * right at its 800-line cap (CLAUDE.md), leaving no room for even one bare
 * `if (sim->interactive) { ... }` block at any of the five call sites
 * design.md's REPL integration pseudocode requires (pre-replay pause,
 * post-session pause, per-event/per-BEGIN_ROUND/per-decision breakpoint
 * checks). Moving the gate into these inline wrappers keeps sim_loop.c's
 * own diff to five single-line, brace-free call expressions. The real
 * functions below still carry the actual logic; a `static inline` here
 * costs nothing at link time (each including TU gets its own copy,
 * trivially small, no ODR risk -- sim_loop.c is the only production
 * consumer).
 *
 * Boundary (Req 5 AC 17, "Simulation isolation", same as sim.h): this header
 * only depends on sim.h (itself core.h + stdbool/stdint/stdio) -- no
 * scheduler.h, no client.h, no capnp types. xce_core_event_t (core.h) and
 * xce_decision_t (decision.h, included transitively via core.h) are both
 * already capnp-free, so the three new task 12.2 hooks below add no new
 * dependency. repl.c's own file header comment documents the same boundary
 * for its implementation.
 */

/*
 * xce_repl_start - the pre-replay pause (Req 5 AC 22's interaction model:
 * "blocks on stdin at startup"). Prints the load banner ("[sim] loaded: ...
 * snapshot @ ts=...", "[sim] ready. type 'help' for commands.") then enters
 * the REPL command loop, blocking on stdin until the operator issues a
 * command that hands control back (`step [N]`/`continue`) or terminates the
 * process (`quit`, which never returns). Called once, by
 * sched_sim_driver_run() (sim_loop.c), strictly before its event loop's
 * `for(;;)` begins -- see xce_repl_pre_replay_pause() below for the actual
 * production call site.
 */
extern void xce_repl_start(xce_sched_sim_driver_t* sim);

/*
 * xce_repl_post_session_check - the `step N` pause-decision point (Req 5 AC
 * 22's interaction model: a `step` budget reaching zero). Called once per
 * completed ReplaySession, immediately after xce_core_end_session()
 * (sim_loop.c), when sim->interactive is set. This is a SEPARATE pause path
 * from the breakpoint checks below -- it never inspects the breakpoint
 * list (that would be too coarse: a breakpoint must interrupt mid-batch, at
 * the exact matching event/decision, not merely once per completed
 * session). See xce_repl_check_begin_round()'s own doc comment for why
 * task 12.2 gave breakpoints their own, separately-triggered hooks instead
 * of folding them into this function.
 */
extern void xce_repl_post_session_check(xce_sched_sim_driver_t* sim);

/*
 * xce_repl_on_event / xce_repl_on_begin_round / xce_repl_on_decision (task
 * 12.2, Req 5 AC 22 "Breakpoints" + "REPL integration with the simulation
 * loop" pseudocode) - the three breakpoint-check hooks, one per granularity
 * the pseudocode's `check_breakpoints(...)` calls require: per decoded
 * ReplayEvent (before it is applied to core state), per ReplaySession
 * boundary (BEGIN_ROUND, before the accumulated event batch is pushed), and
 * per drained decision (DECISION, after verify/output-write, matching
 * sim_loop.c's existing per-decision loop body). Each also does lightweight
 * position bookkeeping (event_index/session_count/last-session decision
 * tally) that `info session` reports -- folded in here rather than given
 * separate hook call sites, since these are the only three places in
 * sim_loop.c's loop where "one event/session/decision was just processed"
 * is already known, and sim_loop.c has no line budget for a sixth call
 * site. Implemented in repl.c; each checks sim->repl_state's breakpoint
 * list for a match and, if found, prints a "[sim] hit breakpoint ..." line
 * and re-enters the same blocking command loop xce_repl_start() uses. A
 * NULL sim/ev/d, or a not-yet-allocated repl_state, is a safe no-op (same
 * "never load-bearing, degrade to unattended" discipline
 * repl_state_ensure()'s own doc comment establishes).
 */
extern void xce_repl_on_event(xce_sched_sim_driver_t* sim,
                              xce_core_event_t*       ev);
extern void xce_repl_on_begin_round(xce_sched_sim_driver_t* sim,
                                    uint64_t                begin_round);
extern void xce_repl_on_decision(xce_sched_sim_driver_t* sim,
                                 xce_decision_t*         d);

/*
 * xce_repl_on_replay_complete (task 12.5, Req 5 AC 22 amendment, bug-1594) -
 * called once, by sched_sim_driver_run() (sim_loop.c), immediately after the
 * replay loop reaches EOF or the AC 20 end-of-stream marker -- the ONE point
 * in the whole REPL integration that requirements.md's original pseudocode
 * let fall through to process exit with no re-entry into the command loop.
 * Prints the existing "[sim] replay complete" banner, marks
 * sim->repl_state->replay_complete, and re-enters repl_command_loop() so the
 * operator can inspect final state; the only remaining exit paths at that
 * point are an explicit `quit` or stdin EOF (both already funnel through
 * repl_cmd_quit()). Implemented in repl.c.
 */
extern void xce_repl_on_replay_complete(xce_sched_sim_driver_t* sim);

static inline void xce_repl_pre_replay_pause(xce_sched_sim_driver_t* sim)
{
    if (sim->interactive) {
        xce_repl_start(sim);
    }
}

static inline void xce_repl_post_session_pause(xce_sched_sim_driver_t* sim)
{
    if (sim->interactive) {
        xce_repl_post_session_check(sim);
    }
}

static inline void xce_repl_check_event(xce_sched_sim_driver_t* sim,
                                        xce_core_event_t*       ev)
{
    if (sim->interactive) {
        xce_repl_on_event(sim, ev);
    }
}

static inline void xce_repl_check_begin_round(xce_sched_sim_driver_t* sim,
                                              uint64_t begin_round)
{
    if (sim->interactive) {
        xce_repl_on_begin_round(sim, begin_round);
    }
}

static inline void xce_repl_check_decision(xce_sched_sim_driver_t* sim,
                                           xce_decision_t*         d)
{
    if (sim->interactive) {
        xce_repl_on_decision(sim, d);
    }
}

static inline void xce_repl_check_replay_complete(xce_sched_sim_driver_t* sim)
{
    if (sim->interactive) {
        xce_repl_on_replay_complete(sim);
    }
}

#endif