Wires do_upgrade_config_with_bytes to append WAL_CONFIG_MARKER through
raft_log_append (live term-stamped consensus record), demotes committed_config_tag
to a non-authoritative cache, and derives the committed config from the latest
committed marker. Preserves the derive across checkpoint compaction via an optional,
backward-compatible config-ref tail in the snapshot sentinel.
Standby sends WalAckReply via xce_reply after each successfully
applied WAL entry. ha_apply_wal_catchup_entry signature extended
with endpoint_t* and cluster_t* parameters. walackreplymsg union
arm added to RequestReply capnp schema and xce_reply_t. Error
entries skip ACK. Dispatch gate test confirms OPCode_walCatchupEntry
allowed in CTRL_STANDBY/ELECTING/INIT.
Co-Authored-By: Claude Sonnet 4.6 (1M context) <noreply@anthropic.com>
6.3: Fix single-node bug — ha_compute_safe_committed_lsn now returns
self_lsn instead of 0 for n_peers=0 (prevents WAL truncation on
single-node re-election). Add self_lsn/self_tag to ha_elect_ctx_t,
populated unconditionally in ha_start_election_async. All 3 test
scenarios pass under ASAN.
6.4: Add test_snapshot_recv_128kb_two_chunks (128KB snapshot in
2x64KB chunks, verifies size and applied_lsn); 4 other test cases
already existed from tasks 3.5c/3.5d. All ASAN-clean.
- Strip handle_ctrlhello: remove repl_add_standby, WAL streaming,
snapshot check, push_config_to_standbys, and CtrlHelloReply
- Keep only: set primary_ctrl_fd, call ha_on_heartbeat_received,
arm ha_arm_heartbeat_timeout_vtask, log INFO
- All replication decisions now handled by heartbeat decision loop
- Test: call with NULL repl + config_tag mismatch → no crash, no repl
messages enqueued, primary_ctrl_fd set correctly
- Add ha_repl_send_snapshot_hook seam in ha.c/ha.h for XCE_TESTING
- test_dispatch_repl_action_send_snapshot: verifies SEND_SNAPSHOT
decision triggers hook when standby_lsn < oldest_wal_lsn
- test_snapshot_recv_two_chunks_assembles_and_renames: verifies standby
assembles snap.part across chunks and renames on isLast=true
- test_snapshot_recv_reconnect_discards_snappart: verifies O_TRUNC
semantics on chunk_index==0 restart after reconnect
- All tests pass under ASAN
- SEND_SNAPSHOT uses checkpoint_lsn (not committed_lsn) for file lookup
- ha_send_snapshot_to_standby stats file for actual total_size
- ha_compute_oldest_wal_lsn scans WAL dir for min segment LSN
- Removed hardcoded 131072 and oldest_wal_lsn=0 placeholders
ha_stream_wal_to_standby() reads WAL from committed_lsn range, accumulates
entries to 256/64KB per batch, enqueues all via xce_request() (non-blocking).
Partial final batch sent immediately. Wired into STREAM_WAL case.
3 tests: 500-entries/2-batches, partial batch, empty range.
Fixed stale task-number comments per review.
OPCode_nop handler now sends stateReport {applied_lsn, config_tag}
instead of nodata. Function in ha.c for unit-test linkability.
Two tests: warm state and zero-state fresh standby (Req 1.4).
Extend ha_apply_wal_catchup_entry with batch branch:
- Check n_entries > 0, iterate entries[] list in order
- Apply each via apply_wal_entry(); skip NULL/errors without crash
- Advance applied_lsn once after full batch (not per-entry)
- n_entries == 0 falls through to task 2.1 single-entry path
4 new unit tests covering full batch, partial batch, error skip, fallback
Replace stub with ha_apply_wal_catchup_entry() calling apply_wal_entry().
CAS-advance applied_lsn on success; log ERROR and skip on failure.
Standby stays in CTRL_STANDBY throughout. 3 new unit tests.
xce_replconfig_reply_raw() - primary sends reply with real bytes via endpoint
xce_replconfig_req_ssl() - standby sends request over raw SSL socket
xce_replconfig_reply_ssl_decode() - standby decodes reply from raw SSL
xce_upgrade_config_req_extract() - documents architectural limitation; returns -ENOTSUP
xce_upgrade_config_req_extract_raw() - extract bytes from raw packet for OP_upgradeConfig
Same bypass pattern as existing xce_replconfigpush_req_raw(): build the
capnp message directly via capn_new_list8 + capn_setv8, sidestepping the
encode_Data_ptr path that routes raw bytes through xce_data_t (a
discriminated cluster-data union that cannot carry raw byte arrays).
Unblocks handle_config_request() and do_one_config_fetch() wiring.
Task A research finding: xce_upgrade_config_req_extract(xce_request_t*)
is unimplementable because xce_decode() calls capn_free() before any
handler runs, and decode_Data_ptr converts the wire-format List(UInt8)
into a zero-filled xce_data_t. Task D must capture the raw io_packet_t
bytes before xce_decode tears them down, then call the _raw variant.
Replaces blocking pthread_join() per thread with a CLOCK_MONOTONIC
deadline + 5ms poll loop. CONF_PUSH_TIMEOUT_MS (500ms) now enforced.
Matches design §6.3 aggregate timeout guarantee.
- Add done field to push_ctx_t; push_thread sets it on exit
- Add static wait_all_with_timeout() before push_config_to_standbys()
- Wire push_config_to_standbys() to use wait_all_with_timeout()
- Add #include <stdatomic.h> to config_repl.c
- Guard push_ctx_t local typedef with #ifndef XCE_TESTING
- Expose push_ctx_t and wait_all_with_timeout_for_test() in header
under XCE_TESTING for unit test access
- Add test_wait_all_with_timeout_slow_threads (timeout fires, acked=0)
- Add test_wait_all_with_timeout_fast_threads (all complete, acked=3)
- Update design doc §6.3 with actual implementation signature and
5ms poll interval note
load_primary_config() reads from workdir/name/conf — conf_save_config()
was writing to workdir/conf. Latent bug: would have corrupted upgrade
restart cycle once Task 11 wired the upgrade path.
Update all conf_read_current_filename, conf_get_saved_tag, and
conf_check_stale calls in the test suite to use the corrected
effective_dir (workdir/name) path structure. Add new test
test_conf_save_config_path_consistency that explicitly verifies the
written path matches what load_primary_config() reads.
- load_primary_config(): resolves conf/current, reads raw bytes, computes
SHA-256 tag, decodes Cap'n Proto via load_cluster_config_from_file(),
checks reserved names, sets config_generation, checks staleness
- myconf_fini(): frees conffile and cluster_config (calls free_ClusterConfig)
- Remove static cf global from myconf.c; get_default_conf() now uses a
local struct cluster_configuration* via load_cluster_config()
- Add load_primary_config_for_test() under XCE_TESTING in config_repl.c
to test path resolution without triggering FATAL
- Add xce/cluster_def.h include to config_repl.c and test_config_repl.c
so cluster_t is complete when XCE_TESTING is active
- TDD: test_load_primary_config_missing_returns_error passes (18/18)
