myxce/src/controller/testsuite/test_repl_unit.c

#include <assert.h>
#include <errno.h>
#include <stdint.h>
#include <string.h>
#include <stdio.h>
#include <pthread.h>
#include <time.h>
/* Use the same Unity include pattern as other controller tests */
#include <unity/unity.h>
#include "repl.h"
#include "config.h"

static void test_repl_init_zeroes_nstandbys(void) {
    replicator_t r;
    TEST_ASSERT_EQUAL_INT(0, repl_init(&r));
    TEST_ASSERT_EQUAL_INT(0, r.nstandbys);
    repl_fini(&r);
    printf("test_repl_init_zeroes_nstandbys: PASS\n");
}

static void test_repl_add_remove_standby(void) {
    replicator_t r;
    /* Use a dummy int as the endpoint pointer — repl.c only compares ep pointers */
    int dummy_ep = 0;
    repl_init(&r);
    int idx = repl_add_standby(&r, (void*)&dummy_ep, "standby1", 7001);
    TEST_ASSERT_TRUE(idx >= 0);
    TEST_ASSERT_EQUAL_INT(1, r.nstandbys);
    repl_remove_standby(&r, (void*)&dummy_ep);
    TEST_ASSERT_EQUAL_INT(0, r.nstandbys);
    repl_fini(&r);
    printf("test_repl_add_remove_standby: PASS\n");
}

static void test_repl_add_standby_max(void) {
    replicator_t r;
    int eps[MAX_STANDBYS + 1];
    repl_init(&r);
    for (int i = 0; i < MAX_STANDBYS; i++) {
        int rc = repl_add_standby(&r, (void*)&eps[i], "sb", 7000 + i);
        TEST_ASSERT_TRUE(rc >= 0);
    }
    /* One over limit must fail */
    int rc = repl_add_standby(&r, (void*)&eps[MAX_STANDBYS], "sb_extra", 9999);
    TEST_ASSERT_TRUE(rc < 0);
    repl_fini(&r);
    printf("test_repl_add_standby_max: PASS\n");
}

static void test_repl_trim_lsn_no_standbys(void) {
    replicator_t r;
    repl_init(&r);
    uint64_t trim = repl_trim_lsn(&r, 42, 60);
    TEST_ASSERT_EQUAL_UINT64(42, trim);
    repl_fini(&r);
    printf("test_repl_trim_lsn_no_standbys: PASS\n");
}

static void test_repl_trim_lsn_disconnected_slot_expiry(void) {
    replicator_t r;
    int dummy_ep = 0;
    repl_init(&r);
    repl_add_standby(&r, (void*)&dummy_ep, "sb", 7001);
    repl_on_ack(&r, (void*)&dummy_ep, 10);
    repl_remove_standby(&r, (void*)&dummy_ep);

    /* Immediately after disconnect: trim guard holds at last_disconnected_lsn=10 */
    uint64_t trim = repl_trim_lsn(&r, 50, 60);
    TEST_ASSERT_EQUAL_UINT64(10, trim);

    /* After expiry (snap_interval_s=0 forces immediate expiry): trim == checkpoint */
    repl_expire_disconnect_slots(&r, 999999, 0);
    trim = repl_trim_lsn(&r, 50, 0);
    TEST_ASSERT_EQUAL_UINT64(50, trim);

    repl_fini(&r);
    printf("test_repl_trim_lsn_disconnected_slot_expiry: PASS\n");
}

/* ============================================================
 * P2-3: repl_wait_ack() tests
 * ============================================================ */

/* Test 1: repl_wait_ack returns -ENODEV when no standbys connected */
static void test_wait_ack_no_standbys_returns_enodev(void) {
    replicator_t r;
    repl_init(&r);
    int rc = repl_wait_ack(&r, /*target_lsn=*/10, /*timeout_ms=*/50);
    TEST_ASSERT_EQUAL_INT(-ENODEV, rc);
    repl_fini(&r);
    printf("test_wait_ack_no_standbys_returns_enodev: PASS\n");
}

/* Test 2: repl_wait_ack returns 0 when standby already ACKed target LSN */
static void test_wait_ack_already_acked(void) {
    replicator_t r;
    int dummy_ep = 0;
    repl_init(&r);
    repl_add_standby(&r, (void*)&dummy_ep, "sb", 7001);
    /* Pre-set acked_lsn to 20 (already past target 10) */
    repl_on_ack(&r, (void*)&dummy_ep, 20);
    int rc = repl_wait_ack(&r, 10, 50);
    TEST_ASSERT_EQUAL_INT(0, rc);
    repl_fini(&r);
    printf("test_wait_ack_already_acked: PASS\n");
}

/* Test 3: repl_wait_ack times out when standby never ACKs */
static void test_wait_ack_timeout(void) {
    replicator_t r;
    int dummy_ep = 0;
    repl_init(&r);
    repl_add_standby(&r, (void*)&dummy_ep, "sb", 7001);
    /* acked_lsn stays at 0 — never reaches target 100 */
    struct timespec start, end;
    clock_gettime(CLOCK_MONOTONIC, &start);
    int rc = repl_wait_ack(&r, 100, 100 /* 100ms timeout */);
    clock_gettime(CLOCK_MONOTONIC, &end);
    TEST_ASSERT_EQUAL_INT(-ETIMEDOUT, rc);
    /* Verify we actually waited ~100ms (not returned immediately) */
    long elapsed_ms = (end.tv_sec - start.tv_sec) * 1000
                    + (end.tv_nsec - start.tv_nsec) / 1000000;
    TEST_ASSERT_TRUE(elapsed_ms >= 80);  /* at least 80ms */
    repl_fini(&r);
    printf("test_wait_ack_timeout: PASS\n");
}

/* Test 4: ACK from background thread wakes repl_wait_ack */
struct ack_args {
    replicator_t *r;
    void         *ep;
    uint64_t      lsn;
    int           delay_ms;
};

static void* ack_sender_thread(void* arg) {
    struct ack_args* a = arg;
    struct timespec ts = { 0, (long)a->delay_ms * 1000000L };
    nanosleep(&ts, NULL);
    repl_on_ack(a->r, a->ep, a->lsn);
    return NULL;
}

static void test_wait_ack_woken_by_background_ack(void) {
    replicator_t r;
    int dummy_ep = 0;
    repl_init(&r);
    repl_add_standby(&r, (void*)&dummy_ep, "sb", 7001);

    struct ack_args args = { &r, (void*)&dummy_ep, 15, 30 /* 30ms delay */ };
    pthread_t th;
    pthread_create(&th, NULL, ack_sender_thread, &args);

    /* Wait for LSN 15 with 200ms timeout — ACK arrives after 30ms */
    int rc = repl_wait_ack(&r, 15, 200);
    pthread_join(th, NULL);

    TEST_ASSERT_EQUAL_INT(0, rc);
    repl_fini(&r);
    printf("test_wait_ack_woken_by_background_ack: PASS\n");
}

void test_repl_unit(void) {
    UNITY_BEGIN();
    RUN_TEST(test_repl_init_zeroes_nstandbys);
    RUN_TEST(test_repl_add_remove_standby);
    RUN_TEST(test_repl_add_standby_max);
    RUN_TEST(test_repl_trim_lsn_no_standbys);
    RUN_TEST(test_repl_trim_lsn_disconnected_slot_expiry);
    RUN_TEST(test_wait_ack_no_standbys_returns_enodev);
    RUN_TEST(test_wait_ack_already_acked);
    RUN_TEST(test_wait_ack_timeout);
    RUN_TEST(test_wait_ack_woken_by_background_ack);
    UNITY_END();
}