Task 5.4 blocked (requires live /xce-deploy-ha cluster — manual only).
Task 5.5: 308 assertions across 45 tests pass; ASAN leaks are pre-existing
in election-iomgr-refactor tests, zero new leaks from this feature.
Add test_repl_registration_lifecycle covering the complete 3-step standby
lifecycle: register (nstandbys==1, ep pointer verified), duplicate
(idempotent, same slot), deregister (ep==NULL, nstandbys==0 — the
previously-untested slot-zeroing invariant). Tasks 5.1/5.2 were already
covered by test_broadcast_one_standby_sends_entry, test_wal_wire
round-trip, and test_wal_ack_reply_updates_acked_lsn_and_signals.
18 repl unit tests pass under ASAN.
Fix defective assertion in test_committed_lsn_advances_after_majority_ack
(before/after delta instead of >0 which fails for lsn=0 first write).
Add test_single_node_committed_lsn_unchanged documenting -ENODEV degraded
mode for no-standby path. Fix NACK test expected return from -ETIMEDOUT to
0: with 1 registered standby, quorum=1 is met by primary self-count alone.
308 tests pass, 0 fail under ASAN.
Handle incoming WalAckReply in repl_ack_decode_and_dispatch: extract
lsn+success, call repl_on_ack on success to update standby acked_lsn
and signal majority-ack waiter. NACK is WARN-logged with no state
change. Two unit tests verify positive path (acked_lsn updated, waiter
unblocked) and negative path (NACK leaves acked_lsn=0, wait times out).
Standby sends WalAckReply via xce_reply after each successfully
applied WAL entry. ha_apply_wal_catchup_entry signature extended
with endpoint_t* and cluster_t* parameters. walackreplymsg union
arm added to RequestReply capnp schema and xce_reply_t. Error
entries skip ACK. Dispatch gate test confirms OPCode_walCatchupEntry
allowed in CTRL_STANDBY/ELECTING/INIT.
Co-Authored-By: Claude Sonnet 4.6 (1M context) <noreply@anthropic.com>
Replace no-send stub with real WAL entry transmission via
xce_wal_batch_req_raw. For each non-catch-up registered standby,
serialize the entry header+payload into a wal_catchup_entry_t
and enqueue. Keep the MAX_PENDING_ACKS eviction guard.
5 new tests: no-standbys, one-standby-send, skip-catch-up,
evict-overloaded, send-failure-continues. Controller suite green.
Co-Authored-By: Claude Sonnet 4.6 (1M context) <noreply@anthropic.com>
Appended "Gap Analysis — Validation Pass (2026-06-09)" to each spec's
research.md with requirement-to-asset maps, status tags, and effort/risk.
Key outcomes:
- ha-repl-hardening: REOPENED with task series 7.1-7.7 — replication
payload data plane is missing (snapshot chunks and WAL catch-up ship
header-only; standbys converge on LSN without holding entity state)
- worker-join-refactor, resval-id-decoupling: marked implemented
(all criteria re-verified, full test suite green)
- buglog: 335/336 (scheduler dequeue, open), 337/338/339 (fixed in
previous commit); cerebrum Decision Log corrected (term-only vote
deny was recorded as intentional but was a regression)
Election protocol fixes validated against raft.tla invariants:
- ha_init_raft(): one-time raft state init at startup (re-init would lose
durable election progress); n_peers = full cluster size including self
- handle_request_vote(): higher-term step-down moved BEFORE the role gate
(split-brain fix); standby vote-deny now requires a live primary control
channel (primary_ctrl_fd >= 0) AND a fresh heartbeat
- ha_heartbeat_is_fresh(): derive freshness from ha->last_activity (the
field production actually writes); the orphaned last_heartbeat timespec
had no production writer, leaving the vote-deny gate inert (bug-337);
field removed from ha_state_t
- handle_request_vote(): restore same-candidate idempotent re-grant —
deny only a DIFFERENT candidate in the same term, matching raft.c and
Raft §5.2 votedFor ∈ {Nil, candidateId} (bug-338)
- raft_init(): restore voted_for_term alongside a persisted vote; leaving
it 0 allowed a double vote in the same term across a restart (bug-339)
- myapp_run(): leader_known check treats a vote recorded under this node's
own name as a self-vote — production persists the real candidate name,
the "self" placeholder only appears in test mode
- raft_on_vote_request(): leader steps down on higher-term vote request
instead of denying it
Tests: test_proto_H6_restored_vote_blocks_second_vote added; H1 restore
assertion strengthened; test_ha_vote_gate.c driven through last_activity +
primary_ctrl_fd (the real production fields). Full /xce-build all green
(lib + controller + scheduler + Go suites, 0 failures, ASAN clean).
deploy-ha.sh: start.sh now forwards extra args to the controller binary.
Root cause: task_cmp in delay.c compared nextrun (always 0 for ms-tasks)
instead of nextrun_ts, making all ms-tasks appear equal in the ordered
queue. The heartbeat task was re-enqueued correctly but stuck behind the
liveness poll task in the broken ordering.
Changes:
- delay.c: fix task_cmp to compare nextrun_ts for ms-tasks (ns precision)
- ha.c: use runcount=-1 (infinite repeat) instead of one-shot+re-arm;
simpler and avoids the broken re-arm path entirely
- ha.c: add static atomic idempotency guard to prevent duplicate heartbeat
tasks on re-election
- ha_state_t.n_peers now matches raft_config_t.n_peers convention:
total cluster size (including self), consistently across both layers
- ha_start_election_async: ha->n_peers = n_peers (candidates_count)
- Convergence/counting loops: i < n_peers - 1 (skip self for standby arrays)
- Single-node: n_peers=1, threshold=0 (same behavior, clear semantics)
- ha_elect_ctx_t.n_peers unchanged (separate field for vote array sizing)
- Tests: 3-node n_peers=2->3, single-node 0->1, loop bounds updated
E2E test 6.7: 3-node cluster lifecycle verified
- Initial: ctrl-1 PRIMARY via majority convergence, no degraded mode
- Kill primary: RDHUP detected on both standbys, ctrl-2 elected at term=4
- No data loss: config tag preserved across failover
- Full ASAN build green
- Fix ha_start_election_async: ha->n_peers = n_other (other peers),
not candidates_count (total including self). The standby_converged[]
array is indexed by peer index, so the bound must be n_other.
- Fix ha_compute_safe_committed_lsn: return self_lsn for n_peers==0
(prevents WAL truncation on single-node re-election).
- Integration test: 3-node cluster reaches CTRL_PRIMARY via majority
convergence within ~20s; no degraded-mode WARN in logs.
6.3: Fix single-node bug — ha_compute_safe_committed_lsn now returns
self_lsn instead of 0 for n_peers=0 (prevents WAL truncation on
single-node re-election). Add self_lsn/self_tag to ha_elect_ctx_t,
populated unconditionally in ha_start_election_async. All 3 test
scenarios pass under ASAN.
6.4: Add test_snapshot_recv_128kb_two_chunks (128KB snapshot in
2x64KB chunks, verifies size and applied_lsn); 4 other test cases
already existed from tasks 3.5c/3.5d. All ASAN-clean.
- config_repl.c: INFO at WAL catch-up start with start/target LSN (Req 7.1)
- config_repl.c: INFO at snapshot transfer start and complete with
checkpoint_lsn and size (Req 7.3)
- ha.c committing_timeout_fn_for_test: add WARN log counting
n_converged/n_pending before promotion, matching production path (Req 7.5)
- Reqs 7.2 (standby converged INFO) and 7.4 (majority INFO) were
already present from tasks 3.1 and 5.2 respectively
- Change HA_DEFAULT_COMMITTING_TIMEOUT_MS from 10000 to 60000
- committing_timeout_fn: count converged/pending standbys from
standby_converged[], log WARN with counts, then promote (degraded mode)
- Replace hardcoded 10000 in test_ha_evaluate_committing.c with macro
- Three new tests: default=60000, degrade-promote with 1/2 and 0/2 converged
- Strip handle_ctrlhello: remove repl_add_standby, WAL streaming,
snapshot check, push_config_to_standbys, and CtrlHelloReply
- Keep only: set primary_ctrl_fd, call ha_on_heartbeat_received,
arm ha_arm_heartbeat_timeout_vtask, log INFO
- All replication decisions now handled by heartbeat decision loop
- Test: call with NULL repl + config_tag mismatch → no crash, no repl
messages enqueued, primary_ctrl_fd set correctly
- In raft_cb_become_leader, after persist_truncate_wal_above(safe_lsn),
store safe_lsn to ha->last_known_committed_lsn via atomic release
- Test: 3-node voters [100,150,200] → safe_lsn=150; asserts
ha->last_known_committed_lsn == 150 after raft_cb_become_leader_for_test
- Add ha_repl_send_snapshot_hook seam in ha.c/ha.h for XCE_TESTING
- test_dispatch_repl_action_send_snapshot: verifies SEND_SNAPSHOT
decision triggers hook when standby_lsn < oldest_wal_lsn
- test_snapshot_recv_two_chunks_assembles_and_renames: verifies standby
assembles snap.part across chunks and renames on isLast=true
- test_snapshot_recv_reconnect_discards_snappart: verifies O_TRUNC
semantics on chunk_index==0 restart after reconnect
- All tests pass under ASAN
- SEND_SNAPSHOT uses checkpoint_lsn (not committed_lsn) for file lookup
- ha_send_snapshot_to_standby stats file for actual total_size
- ha_compute_oldest_wal_lsn scans WAL dir for min segment LSN
- Removed hardcoded 131072 and oldest_wal_lsn=0 placeholders
ha_stream_wal_to_standby() reads WAL from committed_lsn range, accumulates
entries to 256/64KB per batch, enqueues all via xce_request() (non-blocking).
Partial final batch sent immediately. Wired into STREAM_WAL case.
3 tests: 500-entries/2-batches, partial batch, empty range.
Fixed stale task-number comments per review.
ha_dispatch_repl_action_for_standby() calls push_config_to_standbys()
when PUSH_CONFIG decision. Hook seam for unit tests. Wired into
repl_ack_decode_and_dispatch after ha_process_standby_state.
oldest_wal_lsn=0 placeholder documented for task 3.4.
ha_evaluate_repl_action() pure function: stale tag→PUSH_CONFIG,
lsn<oldest_wal→SEND_SNAPSHOT, lsn<committed→STREAM_WAL, else CONVERGED.
5 tests. Fixed misleading stream_wal_from_zero test name per review.
OPCode_nop handler now sends stateReport {applied_lsn, config_tag}
instead of nodata. Function in ha.c for unit-test linkability.
Two tests: warm state and zero-state fresh standby (Req 1.4).
Extend ha_apply_wal_catchup_entry with batch branch:
- Check n_entries > 0, iterate entries[] list in order
- Apply each via apply_wal_entry(); skip NULL/errors without crash
- Advance applied_lsn once after full batch (not per-entry)
- n_entries == 0 falls through to task 2.1 single-entry path
4 new unit tests covering full batch, partial batch, error skip, fallback
Replace stub with ha_apply_wal_catchup_entry() calling apply_wal_entry().
CAS-advance applied_lsn on success; log ERROR and skip on failure.
Standby stays in CTRL_STANDBY throughout. 3 new unit tests.
Add standby_reported_tag/lsn/converged arrays to ha_state_t, sized
MAX_HA_CANDIDATES. Zero-init via existing memset in ha_init().
Unit test verifies zero-init and writability.
Add self-referential entries @3 :List(WalCatchupEntry) field with
$C.maplistcount("n_entries"). Single-entry path unaffected — n_entries
defaults to 0, entries to NULL when not using batch mode.
Add StateReport struct {appliedLsn, configTag} as stateReportMsg @15
variant in RequestReply.data union. Standby populates this in heartbeat
replies so the primary can track per-standby convergence.
capnpc-c 1.0.1 has a bug with inline :group inside codecgen unions;
workaround uses named outer struct (wire-equivalent). typemap.h
extended with state_report_t and union member for C codec access.
- Gap analysis: all 10 requirements verified implemented in live codebase
(ha.c, ha.h, config_repl.c, request.c).
- Fix parent group headers (1-10) to [x] since all leaf subtasks complete.
- Mark task 11.5 complete: /xce-build controller passes 1/1 tests, ASAN clean.
- Remaining: integration tests 11.1-11.4 (manual cluster tests, documented
in manual-tests.md).
Add src/tools/test-heartbeat-tolerance.sh: automated bash script that
deploys a 3-node cluster and runs two SIGSTOP/SIGCONT scenarios:
Scenario A (1 × heartbeat_interval_ms pause): verifies no RDHUP fires on
standbys — liveness_poll_fn must not trigger failover for a short silence
within the tolerance window (Req 2.2).
Scenario B (heartbeat_timeout_ms + 500ms pause): verifies exactly one RDHUP
fires on each standby — the activity-based poll fires after sustained silence
and does not loop (Req 2.3, Req 5.4).
Add .kiro/specs/ha-heartbeat-liveness/manual-tests.md: step-by-step manual
procedure, expected log patterns, and results template for both scenarios.
Mark task 4.5 complete in tasks.md.
Call ha_start_primary_heartbeat in raft_cb_become_leader when entering
CTRL_PRIMARY_COMMITTING so standbys receive NOPs during the committing
window. Fixes 60s stability: 0 false RDHUP events on standbys.
Verification task: confirmed config_repl.c handle_ctrlhello calls both
ha_on_heartbeat_received and ha_arm_heartbeat_timeout_vtask (delaymgr poll).
Confirmed ha_on_primary_ctrl_fd_rdhup leads with ha_disarm (Req 5.4).
No pthread_create in heartbeat arm path (Req 1.6). Add thread-count test.
Extend primary_heartbeat_fn to read last_push_time per standby and send NOP
only when elapsed >= heartbeat_interval_s. on_standby_connected writes
last_push_time before ctrlhello send. Remove workaround xce_nop_req at end
of on_standby_connected. Add ha_nop_req_hook XCE_TESTING seam. 3 new tests.
Remove hb_vtask_t, hb_timeout_thread, s_hb_vtask from ha.c. Replace with
liveness_poll_ctx_t + delaymgr liveness_poll_fn: checks cancelled flag and
role==CTRL_STANDBY before acting; re-arms at heartbeat_interval_ms/2.
ha_on_primary_ctrl_fd_rdhup calls ha_disarm_heartbeat_timeout_vtask first
to prevent duplicate failover (Req 5.4). ha_on_heartbeat_received writes
last_activity via clock_gettime. Add test_ha_liveness.c with 7 unit tests.
Enforce heartbeat_timeout_ms >= 2 * heartbeat_interval_ms at startup.
validate_heartbeat_config() in startup_validation.c returns -EINVAL with
error message on violation; wired in cluster_init_phase1 before ha_init().
4 unit tests added to test_ha_startup.c.
Add time_t last_activity to ha_state_t for standby liveness timestamp tracking.
Add time_t last_push_time to standby_ep_ctx_t for primary idle NOP suppression.
Zero-initialize last_activity in ha_init(); last_push_time zeroed by calloc.
Add test_ha_init_last_activity_is_zero to test_ha_startup.c.
