- bug-1799/1801: fix resInUse over-commit in sim replay -- sched_account_jobs's
per-round re-derive pass now skips RECONCILING/UNAVAIL workers the same way
core_reset_workers already does (bug-1751), closing the gap that let a
worker's used slots exceed its own capacity across a resync replay
- bug-1804: revise scheduler-sim-eager-reconciliation spec (user-directed) so
a captured job's job->state is set to RUN synchronously at dispatch capture,
mirroring sched_commit_decision's normal-mode semantics (bug-1624), instead
of deferring until its separately-recorded JOB_STATE_CHANGE event replays
- bug-1800: render bytes-valued CONSUMABLE resources (mem/swp/tmp) with the
same human-scaled unit formatting already used for maxmem/maxswap/maxtmp
- bug-1802/1803: add then revert a break-on-ANY-event breakpoint kind after
live feedback that it over-fires inside busy sessions; replace it with a
prescan-based "next non-dummy session" hint in info summary instead
Full scheduler suite: 77/77 tests pass (asan profile).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RLSNJhNoULvVcUhXEFafQC
Follow-up audit (requested: check other generated sources, specifically
packcc/PEG output) found the identical bug shape in the four PEG-parser
custom_targets: section_parser, rusage_parser, xce_resreq_parser, and
xce_select_parser each produce a .c + a paired .h (section.h, rusage.h,
xce_resreq.h, xce_select_peg.h), but libxce_src only referenced each
parser's [0] (.c) index. lib/resreq.c -- confirmed via a project-wide
grep to be the only consumer of any of these four headers -- had no
declared build-order dependency on any of the four codegen steps.
Fix: pass each of the four custom_targets unindexed into libxce_src,
same pattern as the capnp fix. No libxce_dep change needed here since
nothing outside src/lib/ consumes these headers.
A project-wide search confirms these, plus the capnp custom_target, are
the only multi-output C/H codegen steps in the whole build -- every other
custom_target() (xceadmin, apiserver, xcecli, autoscaler/providers)
produces a single Go-binary/stamp output with no equivalent hazard.
Verified: a third consecutive full from-scratch `./tools/xce-build.sh all
debug` build (1173/1173 targets) succeeded clean; a fresh `lib debug`
build plus the full lib test suite (313/313) passed; a fresh incremental
controller/ASAN rebuild passed 1331/1331 on a quiet re-run (its first,
concurrent-with-the-full-build run hit an unrelated, confirmed-flaky PTY
harness timing failure in test_smoke_launch_send_echo_capture_stdout_and_exit_code,
reproduced as system-load-induced, not caused by this change).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019jaMf9QEwpugH2W9KAuc7f
The previous fix (654c6e8c) only closed the missing-dependency-edge race
inside the libxce target itself. A live user report on a second
from-scratch `./tools/xce-build.sh all debug` run showed the same race
still hitting scheduler/src/sim_record.c and core_events.c, which reach
controller.capnp.h directly via a raw -Ilib include path with no
declared dependency on the codegen step at all.
Root cause: libxce_dep = declare_dependency(link_with: libxce) -- the
dependency object controller/worker/scheduler all consume uniformly --
only orders a consumer's LINK step after libxce is built; it never
propagated a build-order dependency on the capnp custom_target to a
consumer's own COMPILE steps.
Fix: add `sources: [gen_srcs]` to libxce_dep's declare_dependency() call.
This kwarg exists specifically for generated files that must be built
before any consumer of a dependency compiles, and since every component
already lists libxce_dep in its own dependencies, this one change
propagates the missing edge everywhere with no per-component changes.
Verified: two consecutive full from-scratch `./tools/xce-build.sh all
debug` builds (1173/1173 targets, the user's own exact repro command)
both succeeded with no retry; a subsequent incremental controller/ASAN
rebuild stayed clean (1331/1331 tests, 0 ASAN diagnostics).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019jaMf9QEwpugH2W9KAuc7f
libxce_src listed only gen_srcs[0] (controller.capnp.c) as a source of
the static_library('xce', ...) target, never controller.capnp.h -- which
several library files (utils.c and others) reach only via #include.
Ninja had no build edge forcing the capnp custom_target to finish before
those files compiled, so a from-scratch build could schedule them first,
intermittently failing with "controller.capnp.h: No such file or
directory". This is the same symptom recorded across 5+ prior recurrences
in buglog.json since 2026-07-16, previously worked around by retrying the
build rather than root-caused.
Fix: pass the whole gen_srcs custom_target (not gen_srcs[0]) into
libxce_src -- Meson still compiles only its .c output, but now orders the
entire target's build after both outputs are generated. Verified via two
consecutive from-scratch `xce-build.sh lib debug` builds (no retry
needed), the full lib test suite (313/313), and an incremental controller
asan rebuild (1331/1331, 0 ASAN diagnostics) to confirm no regression.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019jaMf9QEwpugH2W9KAuc7f
Live-cluster validation, no source changes: independently reproduced
(implementer + reviewer, separate deploys) that a destructive command
inside a sourced file, run within an otherwise-interactive session,
still prompts for confirmation with wording identical to a directly-typed
invocation, is skipped once the session toggle is set, and that decline
does not trip set -e's abort-on-failure (Req 13.7). Structurally confirmed
the gate has no code path capable of distinguishing a sourced line from
a typed one. Bumps bug-1797's occurrence count (recurred via the source
call path, confirmed pre-existing, not new).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019jaMf9QEwpugH2W9KAuc7f
Live-cluster validation, no source changes: independently reproduced
(implementer + reviewer, separate deploys) that all five destructive
commands prompt by default, treat decline and real-SIGINT identically as
"not run" (not "failed", the deliberate Req 9.9 exception to Req 1.3),
skip the prompt under --yes/non-interactive/session-toggle, and match
Req 9.5's exact enumeration including its reversal-action exclusions.
Logs bug-1796 (misleading perror() text from stale errno in
cmd_qctrl/hostctrl/jobkill) and bug-1797 (cmd_qctrl queue-name leak on
the RPC-error path) as pre-existing, deliberately-deferred findings.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019jaMf9QEwpugH2W9KAuc7f
Routes all 26 blocking xcecli_* call sites across ~24 commands through
xcetest_run_interruptible(), wires xcetest_set_active_connection() at
execute_line()'s dispatch point (active_ctx->ctx, read fresh per
command), and fixes main()'s REPL loop to distinguish a real EOF from
an EINTR-interrupted readline() so Ctrl-C at an empty prompt discards
the line instead of exiting the session.
Live-discovered and fixed bug-1794: fill_job_alloc() never initializes
xce_job_alloc_t's nres_shared/allocs_shared fields -- harmless as stack
garbage before this task, genuine heap garbage once moved into a
heap-allocated ctx block (a necessary consequence of the adapter's
heap-only precondition). Fixed by switching all ~26 call-context
allocations from malloc to calloc uniformly. Also fixed an argv-aliasing
hazard: cmd_hello/cmd_jobckpt's -m values aliased optarg, which
execute_line() frees immediately after return including on the
abandoned path -- now strdup'd into the heap block.
Also closed a safety-critical gap this task's own design introduced
(bug-1795): before this task the REPL was fully synchronous, so
leave_ctx() (called by up/quit) could never run while an RPC was
outstanding. An abandoned worker can now persist past command
completion, so leave_ctx() tearing down the connection could
use-after-free it. Fixed via xcetest_wait_connection_idle(), which
blocks on the same per-connection semaphore the adapter already
tracks, then releases it, proving no worker is active before teardown.
Proven with a deterministic white-box RED->GREEN test, since the race
itself is too timing-dependent for a black-box test to reliably force.
1361/1361 across the full controller suite (+2), 0 regressions.
Task 3.2 of .kiro/specs/xce-test-cli-ux/tasks.md.
Requirements: 1.1, 1.2, 1.3, 1.4, 1.5
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019jaMf9QEwpugH2W9KAuc7f
Migrates 17 commands (cmd_hello, cmd_jobinfo, cmd_jobrun, cmd_jobsub,
cmd_resval, cmd_jobkill, cmd_jobckpt, cmd_qctrl, cmd_hostctrl,
cmd_runtasks, cmd_setpend, cmd_jobstart, cmd_jobfinish, cmd_jobfail,
cmd_resupdate, cmd_walcompare, join_worker_parse_attrs) from raw
getopt()/hand-rolled parsing to the shared flagspec_t + getopt_long
mechanism, so every one now uniformly rejects an unrecognized or
malformed flag with a usage summary and, where a close match exists,
a suggestion. cmd_walcompare's hand-rolled parser needed a leading '+'
in its optstring to preserve its pre-migration flags-only-before-
positionals behavior. Also fixes bug-1704: cmd_qctrl's uninitialized
action variable, now sentineled and rejected when unset, mirroring
cmd_hostctrl's existing pattern -- this also makes the destructive-
command gate's -i/-c detection (task 3.3) safe to rely on. Every
existing short flag's letter, value format, and default is unchanged
for a valid invocation. 1357/1357 across the full controller suite
(+4), 0 regressions.
Task 3.1 of .kiro/specs/xce-test-cli-ux/tasks.md.
Requirements: 2.1, 2.2, 2.3, 2.4, 6.1, 6.2, 6.3, 6.4, 10.1, 10.2, 10.3
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019jaMf9QEwpugH2W9KAuc7f
cmd_join_worker's simulated-worker maxmem default was 64 bytes -- a
leftover from when the field was MB-scale, unfixed when maxmem became
bytes-canonical elsewhere. Now 64 * 1024 * 1024. Extracted the
argument-parsing/defaulting logic into join_worker_parse_attrs()
(join_worker_args.c), since it runs entirely before the function's
network call and is a genuine testable seam -- same precedent as
task 2.5's joblist_display.c. Verified live against a real deployed
cluster (workerlist reports MaxMem: 64.00 MB) plus a permanent 5-test
regression suite. maxswap/maxtmp have the identical stale-default bug
(logged as bug-1793) but are deliberately left unfixed here since
USAGE_JOIN_WORKER's help text currently documents their stale values
accurately -- fixing only the code would create a new docs mismatch;
a locked-in sibling-defaults test documents this for the follow-up.
1353/1353 across the full controller suite (+5), 0 regressions.
Task 2.6 of .kiro/specs/xce-test-cli-ux/tasks.md.
Requirements: 12.1
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019jaMf9QEwpugH2W9KAuc7f
Registers libedit's GNU-readline-compatible rl_attempted_completion_function
under g_interactive only. The candidate generator reads active_ctx->commands[]
live on every call, so completion correctly tracks context switches rather
than freezing at registration time. Single/multi-match UI (auto-complete vs.
double-Tab candidate listing) is entirely libedit's stock behavior once given
a correct context-scoped generator. Proven via a black-box pty test verified
sound against a false-positive risk: xce_test has no fuzzy command-name
matching, so an uncompleted partial token cannot coincidentally trigger the
same effect a real completion would. Also fixes a harness bug (bug-1792):
disabling kernel ECHO for output capture was silently suppressing libedit's
own completion feedback too; added clitest_spawn_ex() with disable_echo as
an explicit parameter, clitest_spawn() unchanged for existing callers.
1307/1307 controller suite passing (+1), re-verified 8/8 for flakiness.
Task 2.3 of .kiro/specs/xce-test-cli-ux/tasks.md.
Requirements: 7.1, 7.2, 7.3, 7.4
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019jaMf9QEwpugH2W9KAuc7f
A registry of per-connection locks, acquired (interruptibly) before
spawning a worker and released by whichever side finishes last, so an
abandoned call's worker is never running concurrently with a new call
on the same connection. Uses a POSIX semaphore (sem_t), not a mutex:
review round 1 found the initial pthread_mutex_t implementation relied
on behavior POSIX classifies as undefined for a non-owning-thread
unlock (not just error-checking mutex types) -- this design's worker
thread legitimately releases a lock the caller thread acquired, which
sem_t supports with no ownership concept at all. bug-1791. Design.md
synced to reflect the semaphore choice. 1285/1285 controller suite
passing.
Task 1.5 of .kiro/specs/xce-test-cli-ux/tasks.md.
Requirements: 1.1, 1.5
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019jaMf9QEwpugH2W9KAuc7f
Captured simulator REPL session findings from bug-1790 verification:
incorrect maxswap resource value display and a suggestion to show
per-worker slot allocation counts in `info worker` output.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019jaMf9QEwpugH2W9KAuc7f
Adds ug1_global_mem to limits.yaml: a permanent, real GLOBAL limit on
"mem" (a per-host resource, not "slots"), capping ug1's total
cluster-wide mem usage at 5GB. This is exactly the scenario bug-1790
fixed but only unit-tested until now -- no limit in the shipped example
config exercised a global cap on a non-slots per-host resource.
Live-verified via a fresh single-node deploy: 3 jobs submitted as user1
(ug1 member) each requesting rusage[mem=2000000000] (2GB) on queue
normal. Scheduler trace confirms ug1_global_mem correctly matches and,
for the first time, computes a real nonzero job-wide-total wanted value:
unsatisfy_ resource 36 total 5000000000.000000 inuse 4000000000.000000
uncomit 0.000000 wanted 2000000000.000000
unsatisfy_ unmet resource 36 (limit=ug1_global_mem) shortfall
1000000000.000000
The 3rd job (4GB inuse + 2GB wanted = 6GB > 5GB cap) correctly PENDed
until an earlier job's mem freed up. Deploy config validated with zero
new warnings.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GLfB5uWRdmx2WiZSFC7Fm7
bug-1743 (gitea#46's original tracking entry) still said Part 1
(dispatch-stops-at-8) was "UNRESOLVED/NOT ACTIONABLE, pending reporter
info" -- stale since the 6-bug limit-plugin cascade (bug-1784 through
bug-1790) fully resolved it without needing that info, and gitea#46 was
just validated live and closed. Updates the entry with the full
resolution chain and the closing live-verification evidence.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GLfB5uWRdmx2WiZSFC7Fm7
Closes the gap bug-1789 explicitly carved out: a GLOBAL limit built on a
per-host resource other than "slots" (e.g. a future absolute global mem
cap) needs ctx->alloc_req.host to carry that resource's job-wide total
want during the global phase, but only "slots" ever got that treatment
(via seqjob/parjob_prepare_allocation()'s own unconditional store).
Adds calc_wanted_host_resval_job_totals() (resreq.c), sharing its loop
body with calc_wanted_global_resvals() via a new static helper
parameterized only by which XCE_RESF_GLOBAL direction to match -- it
computes the SAME job-wide-total formulas (PER_TASK: value*nslots, PER_JOB:
value, PER_HOST: value*nhosts) for non-global resources instead of global
ones. seqjob/parjob_prepare_allocation()'s global-phase branch now calls
it into ctx->alloc_req.host alongside the existing calc_wanted_global_
resvals() call into .shared.
Safety was traced, not assumed: plugin_prepare_allocation() only resets
.host at the top of a per-host call, never during the global phase, and
sched_fill_limit_requests() for glimits reads .host later in the SAME
global-phase invocation -- transferring the value into the limit's
permanent .shared record before any later per-host call ever resets
.host. An earlier candidate fix (reusing calc_wanted_host_resvals()
directly) was rejected during design: its PER_HOST formula and, for
parjob, its per-bucket nslots don't give a job-wide total.
New regression tests in test_seqjob_allocator.c/test_parjob_
combinatorial.c prove a non-"slots" per-host resource ("mem") now gets
correctly populated; parjob's test uses maxTasks=3 specifically to prove
the formula uses the job's whole nslots, not a bucket's share.
Full suite (xce-build.sh all asan --incremental): 92/94, both failures
pre-existing and unrelated (bug-1762, bug-1733's already-documented
xcealloc.c leak). Not live-verified -- no limits.yaml entry exercises
this path yet.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GLfB5uWRdmx2WiZSFC7Fm7
meson/ninja/capnp/Go only exist inside the hermetic nix dev shell, but
xce-build.sh never entered it itself -- the /xce-build skill documented
wrapping every invocation in `nix develop ./src --command ...` by hand,
so a bare `bash src/tools/xce-build.sh ...` (run directly instead of
through the skill) failed opaquely with "meson: command not found". This
was a recurring, previously-logged gap that resurfaced again today mid
bug-1789 verification.
The script now checks IN_NIX_SHELL at the top and re-execs itself under
`nix develop` if unset, so every caller -- the skill, a bare invocation,
CI, a human at a terminal -- gets it automatically. A nested call (already
inside the shell) is a no-op past that check. README.md's daily-develop
section updated to match; the old "or use nix develop --command" example
is now redundant and removed.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GLfB5uWRdmx2WiZSFC7Fm7
sched_fill_limit_requests() used to read a limit's underlying resource's
want from the same vector its own virtual-resource entry gets written to.
That's wrong whenever the two differ in scope -- e.g. a GLOBAL limit built
on top of a per-host resource like "slots" (limits.yaml's
ug1_normal_slots): the limit's own vres entry belongs in alloc_req->shared,
but "slots"'s want is only ever staged into alloc_req->host by
seqjob/parjob_prepare_allocation(), so the old code always read a zero and
silently never enforced the cap.
Now both the read source and write destination are derived independently
from each resource's own XCE_RESF_GLOBAL flag (vres->res for the source,
vres->vres for the destination) -- the same flag
calc_wanted_global_resvals()/calc_wanted_host_resvals() (resreq.c) already
dispatch on, so this is the existing rule applied consistently rather than
a new one. Also drops sched_fill_limit_requests()'s unused xce_scheduler_t*
parameter.
Full scheduler suite: 76/77 (the one failure, test_job_rusage_reconciles_
mem_reservation_against_usage, is bug-1762, pre-existing and unrelated).
Live-verified against a fresh single-node deploy.
Filed bug-1790 to track a known, deliberately out-of-scope residual gap:
a future global limit on a per-host resource other than "slots" would need
calc_wanted_host_resvals() to also run during the global phase for that
resource, which nothing currently does.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GLfB5uWRdmx2WiZSFC7Fm7
While live-verifying gitea#46, found and fixed a cascade of 5 previously
undetected bugs that together made every usergroup-scoped limit in
limits.yaml silently non-functional:
- Named usergroups/hostgroups (users.yaml/hosts.yaml) were never
registered into the scheduler's group managers (groupmgr_add() had zero
production callers), so any limit referencing one by name could never
resolve real membership.
- An unconfigured limit scope (e.g. no "projects:") arrived as an
empty-but-present capnp group, not NULL, so build_consumer() built a
real empty group (matching no one) instead of falling back to "all".
- Three separate call sites conflated key_find()'s negative "not found"
return with a real error, short-circuiting before ever reaching the
"instantiate on first use" logic right below them -- the same defect
class already fixed once before in this codebase (bug-1495).
- Two call sites passed &(sched->core.resmgr) where a plain handle was
expected, one level of indirection too many, causing RTTI's key_find()
to reject it as an invalid handle.
All five are live-verified: fresh cluster deploys now correctly match and
instantiate usage tracking for all 7 limits in limits.yaml on every job
submission, reproduced across multiple independent from-scratch redeploys.
A 6th, architecturally distinct issue remains open (bug-1789, logged, not
fixed): sched_fill_limit_requests() computes a job's consumption of a
slots-scoped global limit by reading the wrong request vector, so the
numeric cap itself still never binds. This needs a design decision on
intended cross-scope semantics, not a mechanical fix, so it's left for a
follow-up.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Hb6Edtj4KbS8CrgEWYdA2E
ControlJob() set xce_jobctrl_t.action to the job_ctrl_type_t action code
(kill/stop/resume/checkpoint), but that field is actually the capnp
JobControl_u_which union discriminant -- a different enum entirely. This
made kill/resume/checkpoint hit request.c's -EINVAL default case, and made
stop collide with the checkpoint discriminant and read through the wrong
union member. Live-verified against a real deployed cluster: kill/stop/
resume/checkpoint now behave correctly with no apiserver crash.
Also additively accept a human-readable job ID ("{cluster}-{apiserver}-
{timestamp}-{seq}") on the job control endpoint, alongside the existing
numeric form xcecli already translates to -- lets a caller hit the REST
API directly without reimplementing xcecli's ID packing. Live-verified via
a direct curl call with the human-readable ID.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Hb6Edtj4KbS8CrgEWYdA2E
modelJobToSubmit() never set job_startinfo_t.execuser when converting
a submitted job to the C struct sent to the controller/worker, so
every job ran as the worker's 'nobody' default and failed to exec
(exit 126). Default execuser to the submitting user via a new
resolveExecUser() pure helper, and free the newly allocated C string.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Hb6Edtj4KbS8CrgEWYdA2E
bug-1554: init_host_attrs() replaces hardcoded placeholder stubs with real
detection -- maxswap from sysinfo()'s totalswap (reusing the same syscall
snapshot already taken for maxmem), maxtmp from a fresh statvfs("/tmp")
total-capacity measurement. No synthetic fallback on detection failure, so
a system with swap genuinely disabled correctly reports 0.
bug-1776: the scheduler simulator's "info worker" assigned-jobs listing now
annotates a job consuming more than one "slots" unit (e.g. "jobid*2"),
using per-host allocation data that was already being walked but discarded.
Falls back to the pre-existing per-job listing when jobs on the same worker
have differing slot counts, since a single suffix on a compressed range
would be ambiguous.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Hb6Edtj4KbS8CrgEWYdA2E
/kiro-validate-impl returned GO: 21/21 requirement ACs covered, zero
boundary violations (parjob_allocator/seqjob_allocator/alloc_cache/
scheduler.c untouched, no revalidation trigger fired), zero blocked
tasks, cross-task integration chain (job_submit_data_t ->
apply_job_task_count() -> xce_primary_resreq_t -> scheduler dispatch
-> controller/worker launch) confirmed real end to end.
Closes two minor documentation gaps the audit found:
- tasks.md Implementation Notes now records tasks 2.1/2.2's colocated
unit tests (in pre-existing test_core_events.c/test_snapshot_save_
load.c) as a deliberate, reviewed File Structure Plan deviation.
- bug-1770's buglog.json entry updated from OPEN/NOT FIXED to FIXED,
referencing this feature's commits and end-to-end verification.
spec.json phase set to implementation-complete.
This closes out all 12 sub-tasks of the resreq-maxtasks-wiring
feature.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XYdtrEWWZfKRRGED7raEYg
Extends xce-test-multihost with a second scenario: a 2-element array
job (jobsub -a 2) where each element independently requests the same
nproc+1 task count as the plain-job scenario. Drives element [0]
through the identical RUN-then-DONE, both-hosts-started proof, and
confirms its jobinfo Slots: field matches the plain job's exactly
(Requirement 5.5). Traced the array-expansion path
(handler.c's sched_on_job_array()/clone_job_submit_data()) to confirm
no array-specific shortcut bypasses apply_job_task_count() -- each
element flows through the same core_build_job() ingest as a
standalone job.
Fixes a real bug (bug-1775) found while building this: an array
element's bracketed jobid (e.g. "<base>[0]") was misparsed by
grep -E's bracket-expression syntax, causing a false negative in the
per-host verification. Added ere_escape(), a no-op for plain
(non-bracketed) jobids.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XYdtrEWWZfKRRGED7raEYg
Drive a real multi-slot parallel job through the actual production
dispatch path -- real sched_init(), real queue/worker/job ingest via
xce_core_push_events(), a real scheduling session (exercising task 5.2's
cache-clear wiring), the real sched_allocator() thread, cache lookup,
parjob_allocator's real my_alloc(), host_iter, and commit -- and confirm
the resulting job allocation genuinely spans 2 hosts with correct
per-host slot counts (Req 4.1, 4.2, 4.3).
Discovered and logged bug-1770: parse_resreq_primary() unconditionally
hardcodes primary->minTasks/maxTasks to 1 regardless of what a job
actually requests, and nothing in the real ingest pipeline ever copies
the job's own submitted task count (correctly threaded from the
apiserver's num_processors/maxnum_processors all the way to
xce_sched_job_t.mintasks/maxtasks) onto the nested xce_primary_resreq_t
fields the allocator dispatch actually reads. This predates the feature
by ~7 months and is out of this spec's scope to fix, but it means
parjob_allocator has zero live production path until a dedicated
follow-up lands. The test compensates with one clearly-labeled patch of
the real, already-ingested resreq's task-count fields immediately after
real parsing; everything else in the pipeline is unmodified production
code.
Also logged bug-1771 (xce_sched_fcfs's fcfs_del_job() dereferences
job->queue->name with no NULL guard) discovered while building this
task's fixture; worked around by registering the job's queue before
push, mirroring the apiserver's own pre-submission queue validation.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XYdtrEWWZfKRRGED7raEYg
Wrap sched_make_primary_alloc_() -- the single choke point all three
primary-resreq shapes (standalone, compound-nested, alter-nested via
compound delegation) already funnel through -- with a cache lookup
before allocation and a cache insert on exhaustion. On a hit, pend the
job immediately via the same make_pendreason()/add_job_preason() path
every exhaustion case already uses, without invoking either allocator
(Req 7.3, 7.4, 7.5).
A nested primary has no real per-primary schedobj, so
sched_primary_cache_obj_() synthesizes one on the stack per dispatch for
cache-key purposes; verified memory-safe since alloc_cache.c's
build_key_() copies the fingerprint/identity by value synchronously
before the stack frame unwinds.
Log bug-1768 (compound/alter-nested primaries never get real slot/rusage
availability checks -- seqjob/parjob's prepare_allocation hooks no-op
whenever ctx->schedobj->tag != XCE_RESREQ_PRIMARY) and bug-1769
(sched_make_alter_allocation() type-confuses xce_compound_schedobj_t*
as xce_sched_obj_t*, a ~112-byte heap over-read, currently untested).
Both are pre-existing and out of this feature's scope; discovered and
confirmed while building this task's dispatch tests.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XYdtrEWWZfKRRGED7raEYg
Extensive requirements review found and fixed a real correctness bug
(host_iter shared across plan buckets instead of re-scanned fresh per
bucket, which would silently drop solvable multi-host allocations),
a self-contradiction around parjob_prepare_allocation's scope, a
plan/host-iterator init calling-convention mismatch, and an inverted
kvtab .cmp polarity that would have made the unsatisfiable-resreq
cache permanently non-functional. brief.md brought back into sync
with requirements.md's corrected architecture.
design.md and tasks.md generated and validated (kiro-validate-design
GO after two fixes; independent task-graph sanity review PASS).
Two pre-existing, out-of-boundary gaps found along the way logged as
bug-1766/bug-1767.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XYdtrEWWZfKRRGED7raEYg
on_scheduler_join()'s full job resync and sched_job_new_fun()'s
incremental per-commit push both hold c->sched.lock for their entire
body, making concurrent delivery of the same jobid structurally
impossible -- confirmed by direct code reading, no live repro needed.
This also fully explains the previously-unexplained "redelivery
storm" (up to 18x per jobid): every scheduler reconnect triggers a
full resync of the whole job set, and the scheduler's connection
already flaps repeatedly under heavy load (found earlier this
session), so N flaps produce N redundant resyncs with no race
involved. All scheduler-side and controller-side push-path candidates
are now exhausted; the actual stale-reader for j->submit remains
unfound after 9 sessions.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XYdtrEWWZfKRRGED7raEYg
Static tracing confirms the resreq/select-expression parser fully
copies/interns every string (no aliasing into the short-lived
job_submit_data_t), and the pend_updates dataq's enqueue/dequeue path
cannot return the same item twice. Neither explains the UAF. Updates
the running tally of ruled-out candidates so future sessions don't
re-chase them; the controller-side HOOK_DETAIL_JOB_NEW trace remains
the sharpest open lead.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XYdtrEWWZfKRRGED7raEYg
An idle scheduler (nothing queued to publish) never noticed a dead
controller connection: sched_needs_rejoin was only ever set as a side
effect of an active client-library call, and an idle round makes none.
After any controller failover with nothing already in flight, jobs
submitted to the new primary stayed PEND indefinitely.
Adds xcecli_is_connection_broken() (libxce) -- a pure, socket-free read
of the transport's already-async-maintained dead/alive flag, set for
free by the existing RDHUP disconnect handler with zero application
calls. sched_check_pending_rejoin() now retries xcecli_join() on either
the existing reactive flag or this new passive signal, so a healthy
idle scheduler still makes zero extra network calls while a genuinely
dead connection self-heals within one ~1s round -- live-verified
against a 3-node HA cluster (rejoin fired ~300ms after new-primary
election with nothing submitted in between).
Also closes out bug-1735 (job memory/CPU usage reporting): confirmed
already fixed on this branch since 2026-08-30, just never marked in
the bug log.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XYdtrEWWZfKRRGED7raEYg
Pure verification, no code changes. Deployed a live single-node
cluster and ran tests/regression/run.sh against a Meson-built xcecli
binary, then again via the still-present Makefile path -- both
produced identical 28 passed/1 failed/1 skipped results. Reviewer
independently reproduced this three times and traced the one
pre-existing failure (jobs submit's job-ID format regex) through
source and git history to a 2026-05-07 commit, four months before
this spec existed -- logged as bug-1765 (not fixed, out of scope).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XYdtrEWWZfKRRGED7raEYg
