myxce/src/controller/testsuite/test_ha_failover.c
Rongsong Shen a81f2a249c fix(controller-tests): make Unity test-file attribution and counters consistent suite-wide
Only 21 of 86 test_*.c group functions called their own nested
UNITY_BEGIN()/UNITY_END(). Each nested call reset Unity's global
NumberOfTests/TestFailures counters, so controller_test.c's final
`return UNITY_END();` -- the value meson test actually gates on --
only ever reflected whichever small window of tests ran since the
LAST nested reset, silently discarding pass/fail evidence for
everything before it (measured: 16 of 972 total tests in one run).
The same nested-BEGIN calls also caused PASS/FAIL banners to show
the wrong source file for tests in files that don't reset it
themselves (Unity.TestFile just carries over from whichever group
last called UNITY_BEGIN()).

Fix: replace every nested UNITY_BEGIN() with UnitySetTestFile(__FILE__)
(sets file attribution only, no counter reset) and drop the matching
UNITY_END(); add the same UnitySetTestFile(__FILE__) as the first
statement to the other group functions that had neither. The 2
genuinely standalone binaries (test_job_array_sched_push.c,
test_job_array_apiserver_push.c -- each has its own int main(), not
registered via controller_test.c's TEST() macro) are untouched.

Verified: single consolidated summary now reads
"972 Tests 0 Failures 0 Ignored OK", exactly matching the
ground-truth RUN_TEST call-site count across all 83 registered
group files (976 total minus 4 belonging to the 2 standalone
binaries). Every PASS/FAIL banner now names its own true source
file. Full xce-build.sh all regression pass clean (Ok: 9, Fail: 0).

No production code touched -- test-harness plumbing only.
2026-07-17 14:49:12 +00:00

411 lines
15 KiB
C

/*
* test_ha_failover.c — Unit tests for task 9.4: EPOLLRDHUP failover and
* heartbeat timeout vtask.
*
* Tests:
* 1. ha_on_primary_ctrl_fd_rdhup closes fd, sets to -1, transitions to CTRL_ELECTING
* 2. ha_on_primary_ctrl_fd_rdhup calls persist_truncate_wal_above
* 3. ha_arm_heartbeat_timeout_vtask fires failover after silence
* 4. ha_on_heartbeat_received resets the timeout (no failover on heartbeat)
* 5. FSM: CTRL_STANDBY after election → primary_ctrl_fd closed
* 6. INFO log on FSM transition (Req 10.5)
*
* Requirements: 6.2, 6.3, 6.4, 6.8, 10.5
*/
#define _GNU_SOURCE
#include <errno.h>
#include <pthread.h>
#include <stdatomic.h>
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
#include <sys/socket.h>
#include <time.h>
#include <unistd.h>
#include <unity/unity.h>
#include "ha.h"
#include "xce/cluster_def.h" /* full cluster_t layout for task-5.2 tests */
#include "myconf.h" /* myconf_t for task-5.2 tests */
/* ── Forward declarations — function-under-test (not yet implemented) ────── */
/*
* ha_on_primary_ctrl_fd_rdhup: EPOLLRDHUP event handler for primary_ctrl_fd.
*
* Steps (Req 6.2, 6.3):
* 1. Close and null ha->primary_ctrl_fd
* 2. Transition ha role to CTRL_ELECTING
* 3. Call persist_truncate_wal_above(ha->last_known_committed_lsn) via cluster
* 4. Log INFO: FSM transition (Req 10.5)
*
* Pass c == NULL to skip persist_truncate and am_i_primary_quorum (unit test mode).
*/
extern void ha_on_primary_ctrl_fd_rdhup(ha_state_t *ha, cluster_t *c);
/*
* ha_arm_heartbeat_timeout_vtask: start background thread monitoring heartbeat
* silence on primary_ctrl_fd (Req 6.3, 6.4).
*
* The thread sleeps for election_timeout_ms + rand_jitter. If no heartbeat
* is received (ha_on_heartbeat_received not called) within that window,
* it fires ha_on_primary_ctrl_fd_rdhup.
*
* Subsequent calls re-arm the timeout (same thread, reset deadline).
* Calling ha_on_heartbeat_received() resets the deadline.
*/
extern void ha_arm_heartbeat_timeout_vtask(ha_state_t *ha, cluster_t *c);
/*
* ha_on_heartbeat_received: reset the heartbeat timeout deadline.
* Called whenever a heartbeat arrives on primary_ctrl_fd (Req 6.3).
*/
extern void ha_on_heartbeat_received(ha_state_t *ha);
/*
* ha_disarm_heartbeat_timeout_vtask: stop the heartbeat timeout thread.
* Called when transitioning away from CTRL_STANDBY.
*/
extern void ha_disarm_heartbeat_timeout_vtask(ha_state_t *ha);
/* ── Helpers ─────────────────────────────────────────────────────────────── */
static ha_config_t g_cfg = {
.heartbeat_interval_ms = 3000,
.heartbeat_timeout_ms = 10000,
.election_timeout_ms = 500, /* minimum allowed by ha_init validation */
.probe_connect_timeout_ms = 50,
.max_promotion_retries = 3,
.election_jitter_max_ms = 0, /* no jitter: deterministic timeout */
.election_priority_step_ms = 500,
};
/* Config with short heartbeat_timeout_ms for watchdog-fires tests */
static ha_config_t g_fast_cfg = {
.heartbeat_interval_ms = 2000,
.heartbeat_timeout_ms = 2000, /* minimum valid: == heartbeat_interval_ms */
.election_timeout_ms = 500,
.probe_connect_timeout_ms = 50,
.max_promotion_retries = 3,
.election_jitter_max_ms = 0,
.election_priority_step_ms = 500,
};
/* ── Test 1: RDHUP closes fd and sets primary_ctrl_fd = -1 ─────────────── */
static void test_rdhup_closes_and_nulls_fd(void)
{
ha_state_t ha;
TEST_ASSERT_EQUAL_INT(0, ha_init(&ha, &g_cfg, 1));
/* Set up a socketpair as the "primary_ctrl_fd" */
int sv[2];
TEST_ASSERT_EQUAL_INT(0, socketpair(AF_UNIX, SOCK_STREAM, 0, sv));
ha.primary_ctrl_fd = sv[0];
/* Fire RDHUP with NULL cluster (unit test mode — skips persist/election) */
ha_on_primary_ctrl_fd_rdhup(&ha, NULL);
/* fd must be closed and set to -1 */
TEST_ASSERT_EQUAL_INT(-1, ha.primary_ctrl_fd);
/* Verify sv[0] is really closed by trying to write to it */
ssize_t n = write(sv[0], "x", 1);
TEST_ASSERT_LESS_THAN_INT(0, (int)n);
TEST_ASSERT_EQUAL_INT(EBADF, errno);
close(sv[1]);
ha_fini(&ha);
printf("test_rdhup_closes_and_nulls_fd: PASS\n");
}
/* ── Test 2: RDHUP transitions role to CTRL_ELECTING ───────────────────── */
static void test_rdhup_transitions_to_ctrl_electing(void)
{
ha_state_t ha;
TEST_ASSERT_EQUAL_INT(0, ha_init(&ha, &g_cfg, 1));
/* Start as CTRL_STANDBY */
ha_do_demote(&ha);
TEST_ASSERT_EQUAL_INT(CTRL_STANDBY, (int)atomic_load(&ha.role));
/* Simulate having a primary fd */
int sv[2];
TEST_ASSERT_EQUAL_INT(0, socketpair(AF_UNIX, SOCK_STREAM, 0, sv));
ha.primary_ctrl_fd = sv[0];
ha_on_primary_ctrl_fd_rdhup(&ha, NULL);
/* Must transition to CTRL_ELECTING */
TEST_ASSERT_EQUAL_INT(CTRL_ELECTING, (int)atomic_load(&ha.role));
close(sv[1]);
ha_fini(&ha);
printf("test_rdhup_transitions_to_ctrl_electing: PASS\n");
}
/* ── Test 3: heartbeat received before timeout → no failover ───────────── */
static void test_heartbeat_received_resets_timeout(void)
{
ha_state_t ha;
TEST_ASSERT_EQUAL_INT(0, ha_init(&ha, &g_cfg, 1));
ha_do_demote(&ha);
int sv[2];
TEST_ASSERT_EQUAL_INT(0, socketpair(AF_UNIX, SOCK_STREAM, 0, sv));
ha.primary_ctrl_fd = sv[0];
/* Arm the timeout (200ms + jitter=0) */
ha_arm_heartbeat_timeout_vtask(&ha, NULL);
/* Immediately receive heartbeat to reset the deadline */
ha_on_heartbeat_received(&ha);
/* Wait briefly — less than one full election_timeout_ms */
struct timespec ts = { .tv_sec = 0, .tv_nsec = 50 * 1000000L };
nanosleep(&ts, NULL);
/* Role must still be CTRL_STANDBY (no failover yet) */
TEST_ASSERT_EQUAL_INT(CTRL_STANDBY, (int)atomic_load(&ha.role));
TEST_ASSERT_NOT_EQUAL(-1, ha.primary_ctrl_fd);
ha_disarm_heartbeat_timeout_vtask(&ha);
close(sv[0]);
close(sv[1]);
ha.primary_ctrl_fd = -1;
ha_fini(&ha);
printf("test_heartbeat_received_resets_timeout: PASS\n");
}
/* ── Test 4: heartbeat timeout fires failover ───────────────────────────── */
/*
* liveness_poll_ctx_t and liveness_poll_fn_test_entry: XCE_TESTING seam from ha.c.
* Replicate the typedef here to construct a ctx directly.
*/
typedef struct {
ha_state_t *ha;
cluster_t *c;
_Atomic int cancelled;
} liveness_poll_ctx_t_failover;
extern void liveness_poll_fn_test_entry(liveness_poll_ctx_t_failover *ctx);
static void test_heartbeat_timeout_fires_failover(void)
{
ha_state_t ha;
/* Use fast config: heartbeat_timeout_ms=2000ms */
TEST_ASSERT_EQUAL_INT(0, ha_init(&ha, &g_fast_cfg, 1));
ha_do_demote(&ha);
int sv[2];
TEST_ASSERT_EQUAL_INT(0, socketpair(AF_UNIX, SOCK_STREAM, 0, sv));
ha.primary_ctrl_fd = sv[0];
/* Set last_activity to beyond the timeout (simulate silence) */
struct timespec ts;
clock_gettime(CLOCK_MONOTONIC, &ts);
ha.last_activity = ts.tv_sec - (time_t)(g_fast_cfg.heartbeat_timeout_ms / 1000) - 5;
/* Invoke the liveness poll fn directly (no delaymgr needed) */
liveness_poll_ctx_t_failover ctx;
memset(&ctx, 0, sizeof(ctx));
ctx.ha = &ha;
ctx.c = NULL; /* NULL cluster — unit test mode */
atomic_init(&ctx.cancelled, 0);
liveness_poll_fn_test_entry(&ctx);
/* Failover must have fired: role = CTRL_ELECTING, fd = -1 */
TEST_ASSERT_EQUAL_INT(CTRL_ELECTING, (int)atomic_load(&ha.role));
TEST_ASSERT_EQUAL_INT(-1, ha.primary_ctrl_fd);
close(sv[1]); /* sv[0] was closed by failover handler */
ha_fini(&ha);
printf("test_heartbeat_timeout_fires_failover: PASS\n");
}
/* ── Test 5: ha_on_primary_ctrl_fd_rdhup on already-closed fd is safe ───── */
static void test_rdhup_on_minus_one_fd_is_safe(void)
{
ha_state_t ha;
TEST_ASSERT_EQUAL_INT(0, ha_init(&ha, &g_cfg, 1));
ha.primary_ctrl_fd = -1;
/* Should not crash or abort */
ha_on_primary_ctrl_fd_rdhup(&ha, NULL);
TEST_ASSERT_EQUAL_INT(-1, ha.primary_ctrl_fd);
ha_fini(&ha);
printf("test_rdhup_on_minus_one_fd_is_safe: PASS\n");
}
/* ── Task 5.2: RDHUP → CTRL_ELECTING → ha_start_election_async ─────────── */
/*
* ha_rdhup_election_hook: XCE_TESTING seam — set in ha.c under XCE_TESTING.
* When non-NULL, ha_on_primary_ctrl_fd_rdhup calls this instead of the real
* ha_start_election_async. We use it to verify the RDHUP path triggers
* async re-election (Req 6.3, 6.5, 9.3).
*/
extern void (*ha_rdhup_election_hook)(ha_state_t *ha, cluster_t *c,
int n_peers, xce_candidate_t **peers,
uint64_t my_config_tag, uint64_t my_lsn,
const char *my_name);
/* Counters set by the hook so the test can inspect the call */
static int g_rdhup_hook_called = 0;
static int g_rdhup_hook_n_peers = -1;
static ha_state_t *g_rdhup_hook_ha = NULL;
static void rdhup_election_spy(ha_state_t *ha, cluster_t *c,
int n_peers, xce_candidate_t **peers,
uint64_t my_config_tag, uint64_t my_lsn,
const char *my_name)
{
(void)c; (void)peers; (void)my_config_tag; (void)my_lsn; (void)my_name;
g_rdhup_hook_called++;
g_rdhup_hook_n_peers = n_peers;
g_rdhup_hook_ha = ha;
}
/*
* test_rdhup_calls_start_election_async:
* Req 6.3: heartbeat timeout → ELECTING → async election fires.
* Req 9.3: RDHUP path uses ha_start_election_async (not am_i_primary_quorum).
*
* We supply a minimal cluster_t with 2 candidates so the RDHUP handler
* builds a peer array and calls ha_start_election_async via the hook.
* The test also verifies role is CTRL_ELECTING after the handler.
*
* myconf_t.name is char* — use a string literal.
* myhost == NULL → self-name compare falls back to "" → both candidates are
* included in peer_ptrs (np == 2). That is fine for verifying the hook fires.
*/
static void test_rdhup_calls_start_election_async(void)
{
/* Minimal myconf with 2 candidates (self + 1 peer).
* myconf_t.name is char* — point at a static string. */
myconf_t myconf;
memset(&myconf, 0, sizeof(myconf));
myconf.name = "ctrl-a";
/* Configured node: a real (nonzero) config tag so the no-config voter-only
* RDHUP guard does NOT trip — this test exercises the legitimate "a
* CONFIGURED node re-elects after RDHUP" path (ha-config-bootstrap Req 2.8).
* Without a tag, config_version_tag==0 with candidates_count>1 would (post
* election-safety fix) keep the node a passive voter (CTRL_STANDBY) and the
* election hook would never fire — that was the buggy condition this test
* incidentally relied on. */
myconf.config_version_tag = 0x1234;
myconf.peers_cfg.candidates_count = 2;
snprintf(myconf.peers_cfg.candidates[0].name,
sizeof(myconf.peers_cfg.candidates[0].name), "ctrl-a");
myconf.peers_cfg.candidates[0].port = 7001;
snprintf(myconf.peers_cfg.candidates[1].name,
sizeof(myconf.peers_cfg.candidates[1].name), "ctrl-b");
myconf.peers_cfg.candidates[1].port = 7002;
/* Minimal cluster_t — ha embedded, myhost NULL (unit test mode) */
cluster_t c;
memset(&c, 0, sizeof(c));
c.myconf = &myconf;
/* Initialise the embedded ha_state_t directly */
TEST_ASSERT_EQUAL_INT(0, ha_init(&c.ha, &g_cfg, 0 /* priority=0 */));
ha_do_demote(&c.ha);
/* Mark phase2 done — simulates a surviving standby after first election */
c.ha.phase2_done = 1;
/* Set up a socketpair as the "primary_ctrl_fd" */
int sv[2];
TEST_ASSERT_EQUAL_INT(0, socketpair(AF_UNIX, SOCK_STREAM, 0, sv));
c.ha.primary_ctrl_fd = sv[0];
/* Install spy hook */
g_rdhup_hook_called = 0;
g_rdhup_hook_n_peers = -1;
g_rdhup_hook_ha = NULL;
ha_rdhup_election_hook = rdhup_election_spy;
/* Fire RDHUP with the stub cluster */
ha_on_primary_ctrl_fd_rdhup(&c.ha, &c);
/* Restore hook */
ha_rdhup_election_hook = NULL;
/* Verify: role must be CTRL_ELECTING */
TEST_ASSERT_EQUAL_INT(CTRL_ELECTING, (int)atomic_load(&c.ha.role));
/* Verify: fd must be closed and set to -1 */
TEST_ASSERT_EQUAL_INT(-1, c.ha.primary_ctrl_fd);
/* Verify: ha_start_election_async (hook) was called exactly once */
TEST_ASSERT_EQUAL_INT(1, g_rdhup_hook_called);
/* Verify: n_peers > 0 (loop ran; myhost==NULL so both candidates included) */
TEST_ASSERT_GREATER_THAN_INT(0, g_rdhup_hook_n_peers);
close(sv[1]); /* sv[0] was closed by the RDHUP handler */
ha_fini(&c.ha);
printf("test_rdhup_calls_start_election_async: PASS\n");
}
/*
* test_rdhup_phase2_done_preserved:
* Req 9.3: phase2_done flag must remain 1 after RDHUP so ha_elect_evaluate_and_signal
* skips cluster_init_phase2 on the failover election.
*/
static void test_rdhup_phase2_done_preserved(void)
{
ha_state_t ha;
TEST_ASSERT_EQUAL_INT(0, ha_init(&ha, &g_cfg, 0));
ha_do_demote(&ha);
ha.phase2_done = 1; /* set by first-boot election */
/* Fire RDHUP in NULL-cluster mode (unit-test shortcircuit) */
ha_on_primary_ctrl_fd_rdhup(&ha, NULL);
/* phase2_done must still be 1 — RDHUP does NOT reset it */
TEST_ASSERT_EQUAL_INT(1, ha.phase2_done);
ha_fini(&ha);
printf("test_rdhup_phase2_done_preserved: PASS\n");
}
/* ── Test 6: symbol existence check ─────────────────────────────────────── */
static void test_ha_failover_symbols_exist(void)
{
typedef void (*rdhup_fn)(ha_state_t *, cluster_t *);
typedef void (*arm_fn)(ha_state_t *, cluster_t *);
typedef void (*hb_fn)(ha_state_t *);
typedef void (*disarm_fn)(ha_state_t *);
rdhup_fn f1 = ha_on_primary_ctrl_fd_rdhup;
arm_fn f2 = ha_arm_heartbeat_timeout_vtask;
hb_fn f3 = ha_on_heartbeat_received;
disarm_fn f4 = ha_disarm_heartbeat_timeout_vtask;
TEST_ASSERT_NOT_NULL((void*)f1);
TEST_ASSERT_NOT_NULL((void*)f2);
TEST_ASSERT_NOT_NULL((void*)f3);
TEST_ASSERT_NOT_NULL((void*)f4);
printf("test_ha_failover_symbols_exist: PASS\n");
}
/* ── Suite entry point ──────────────────────────────────────────────────── */
void test_ha_failover(void)
{
UnitySetTestFile(__FILE__);
RUN_TEST(test_rdhup_closes_and_nulls_fd);
RUN_TEST(test_rdhup_transitions_to_ctrl_electing);
RUN_TEST(test_heartbeat_received_resets_timeout);
RUN_TEST(test_heartbeat_timeout_fires_failover);
RUN_TEST(test_rdhup_on_minus_one_fd_is_safe);
RUN_TEST(test_ha_failover_symbols_exist);
RUN_TEST(test_rdhup_calls_start_election_async);
RUN_TEST(test_rdhup_phase2_done_preserved);
}