myxce/.kiro/specs/admin-config-tool/tasks.md

Implementation Plan

• 1. Foundation: package scaffolding, shared errors, build/toolchain integration

• 1.1 Set up the xceadmin Python package skeleton

  • Editable install registers a real xceadmin console-script entry point backed by an empty, working click group (no subcommands yet — config build/config push are added by task 4.1, not this task)
  • xcecommon is importable as a standalone package independent of xceadmin's CLI
  • Observable: running the entry point after an editable install prints usage/help text without error, showing zero commands
  • Requirements: 5.4

• 1.2 Establish a shared error-handling foundation

  • One common base exception type carries a human-readable message
  • Every specific failure mode (schema not found, validation failure, reserved name, duplicate entry, connection timeout, corrupt reply, too many redirects, no primary available) has its own subclass
  • Observable: raising any of these subclasses and catching the common base type recovers the message
  • Requirements: 7.1, 7.2, 7.3, 7.4

• 1.3 Wire xceadmin into the project's build and dev-shell tooling

  • Nix dev shell provides the Python interpreter and all dependencies needed to build and test xceadmin
  • Running the build command for xceadmin performs an editable install by default and a pinned non-editable install under the release profile, running the test suite after whichever install just happened
  • The build step keeps the packaged copies of the wire-protocol schema and the validation schemas in sync with their source locations elsewhere in the repo, and packages both correctly under either install mode
  • Build/test command documentation, permission allowlist entries, and automatic formatting/linting on Python file edits all exist for the new component
  • Observable: running the build command for this component from a clean checkout succeeds and reports test pass/fail
  • Requirements: 5.5, 8.1, 8.2, 8.6

• 2. Core: xcecommon shared library

• 2.1 (P) Validate operator-authored YAML against the bundled schemas

  • Each of the seven config file types can be checked against its own bundled validation schema, independent of anything the operator supplies
  • Reserved queue/host names are rejected even when otherwise schema-valid
  • Duplicate names within a single file/section are rejected
  • Cross-references to undefined groups or resources are flagged as warnings without blocking the build
  • Observable: validating a config directory with no schema files present anywhere in it still succeeds
  • Requirements: 4.1, 4.2, 4.3, 4.4, 4.5, 5.5
  • Boundary: xcecommon.validation

• 2.2 (P) Load the cluster wire-protocol schema

  • The wire-protocol schema loads once per process and exposes every message type xceadmin needs to build or decode
  • Loading works identically whether xceadmin was installed in editable or pinned mode
  • A missing or corrupted schema copy produces a clear, actionable error rather than a crash
  • Observable: loading the schema under a pinned (non-editable) install still resolves the bundled copy correctly
  • Requirements: 5.1, 5.5, 7.4
  • Boundary: xcecommon.schema

• 2.3 (P) Map validated YAML into cluster configuration fields

  • Every field the cluster configuration binary format defines is either populated from validated YAML or deliberately left untouched, with no field silently dropped
  • List-based sections preserve the exact order they appeared in the YAML
  • No timestamp, hostname, or username value ever enters the mapped output
  • Building the same input twice produces identical output
  • Requirements: 1.1, 1.7, 1.8, 1.9, 1.10, 1.11, 1.12, 5.3, 9.1, 9.2, 9.3
  • Boundary: xcecommon.mapping
  • Depends: 2.2

• 2.4 (P) Establish the TLS connection and wire framing to the controller

  • A single request can be sent and a single reply received over a TLS connection using the cluster's existing certificate trust model
  • Message framing matches the controller's own byte-for-byte, verified against known-good byte sequences
  • The connection always closes cleanly, including on error or interruption
  • Requirements: 2.1, 2.3, 2.4, 5.2, 6.1, 7.1, 7.3, 7.6
  • Boundary: xcecommon.wire
  • Depends: 2.2

• 3. Core: xceadmin CLI orchestration

• 3.1 (P) Compile a configs directory into a deployable cluster binary

  • Running the build command against a directory of YAML files produces a binary output file with a printed checksum
  • A missing individual YAML file is treated as an empty section, not an error
  • Unrecognized-but-valid YAML fields produce a warning, not a failure
  • Output can be directed to a specific path or to standard output
  • Requirements: 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.9, 8.3, 8.4
  • Boundary: xceadmin.build
  • Depends: 2.1, 2.3

• 3.2 (P) Follow controller redirects to find the primary

  • A reply pointing at a different host/port is followed automatically, up to a bounded number of hops
  • Exceeding the hop limit or waiting past the connection timeout produces a clear error naming the last host contacted
  • Observable: a chain of up to three redirects resolves to a final destination without operator intervention
  • Requirements: 3.1, 3.2, 3.3, 3.4
  • Boundary: xceadmin.discovery
  • Depends: 2.4

• 3.3 Push a cluster binary to the controller, with a dry-run mode

  • A real push reports the assigned configuration version, acknowledgement count, and any error, exiting non-zero on failure
  • A dry-run reports whether the controller would accept the config without ever committing it
  • Every connection failure, protocol-level rejection, corrupt input, or missing schema maps to a specific, distinct error
  • Requirements: 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 6.1, 6.2, 6.3, 7.1, 7.2, 7.3, 7.4, 7.5, 7.6
  • Boundary: xceadmin.push
  • Depends: 2.4, 3.2

• 4. Integration: wire the CLI entry point and hook xceadmin into cluster deployment

• 4.1 Expose config build and config push as a single command-line tool

  • xceadmin config build and xceadmin config push (with --dry-run) are both reachable from one installed command
  • Any failure surfaces as a specific, human-readable message with a non-zero exit code, not a raw traceback
  • Interrupting a push mid-flight leaves no dangling connection and reports a clean cancellation
  • Requirements: 1.2, 1.3, 2.2, 2.4, 7.1, 7.2, 7.3, 7.4, 7.5, 7.6, 8.1, 8.2
  • Boundary: xceadmin.cli
  • Depends: 3.1, 3.3

• 4.2 Build cluster configuration automatically during HA deployment

  • Deploying a cluster with the build-config option produces a fresh binary from the current YAML before startup
  • Deploying with no binary present and no flag still produces one automatically
  • Deploying with an existing binary and no flag leaves it untouched, matching prior behavior
  • Requirements: 8.3, 8.4, 8.5
  • Boundary: deploy-ha.sh
  • Depends: 4.1

• 5. Validation: test coverage across build, push, and packaging

• 5.1 (P) Unit test the field-mapping logic in isolation

  • Both mapper shapes (list sections and the scalar section) are verified against in-memory input with no file I/O
  • The one file that feeds two separate output fields is verified explicitly
  • Requirements: 1.1, 1.7, 1.8, 1.9, 1.10, 1.11, 1.12, 5.3, 9.1, 9.2, 9.3
  • Boundary: xcecommon.mapping
  • Depends: 2.3

• 5.2 (P) Unit test wire framing

  • Framing round-trips correctly against a fixed, known byte sequence and against a local loopback connection
  • Requirements: 2.1
  • Boundary: xcecommon.wire
  • Depends: 2.4

• 5.3 (P) Verify bundled schemas resolve under every install mode

  • Both the wire-protocol schema and the validation schemas resolve to real, parseable files under the currently active install
  • A deliberately corrupted or absent packaged schema produces the expected installation-hint error rather than a crash
  • Meaningful confirmation of the pinned install path requires running this under the release build profile
  • Requirements: 5.5, 7.4
  • Boundary: xcecommon.schema, xcecommon.validation
  • Depends: 2.1, 2.2, 1.3

• 5.4 (P) Golden-file test config build determinism

  • Building from a minimal fixture, a full fixture covering all seven file types, and a set of intentionally invalid fixtures each produce the expected result
  • Building the same fixture twice produces byte-identical output and an identical checksum
  • Requirements: 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8, 1.9, 1.10, 1.11, 1.12, 9.1, 9.2, 9.3
  • Boundary: xceadmin.build
  • Depends: 3.1

• 5.5 (P) Test every YAML validation failure mode

  • Each invalid-fixture case (schema violation, reserved name, duplicate name including a cross-type collision, undefined reference) produces the documented outcome — hard failure or warning, matching the requirement
  • Requirements: 4.1, 4.2, 4.3, 4.4, 4.5
  • Boundary: xcecommon.validation
  • Depends: 2.1

• 5.6 (P) Test config push and dry-run against a mock controller

  • A mock TLS server standing in for the controller confirms the full push flow: successful push, redirect-following, and every documented error path
  • The same mock confirms dry-run reports both an accepted and a rejected outcome correctly
  • Requirements: 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 3.1, 3.2, 3.3, 3.4, 6.1, 6.2, 6.3, 7.1, 7.2, 7.3
  • Boundary: xceadmin.push, xceadmin.discovery
  • Depends: 3.3

Implementation Notes

• 1.3: nix's bare python3 does not put pip on PATH — python3Packages.pip had to be added to nativeBuildInputs alongside the packages design.md's Technology Stack table lists; not a spec gap, just an operational dependency the table didn't need to spell out.

• 1.3: Claude Code PostToolUse hooks receive tool input via stdin JSON (tool_input.file_path), not a $FILE_PATH env var — brief.md's ruff-hook sketch used the env-var form, which would have silently no-op'd. The actual hooks added to .claude/settings.json follow this repo's existing .wolf/hooks/post-write.js stdin-JSON convention instead. Any future hook work in this repo should follow the same pattern, not brief.md's original sketch.

• 1.3: src/xceadmin/src/xcecommon/schema_files/ (synced capnp + JSON schema copies) is a build artifact, regenerated every xce-build.sh xceadmin run — never hand-edit it, never commit it (src/xceadmin/.gitignore excludes it).

• 2.1: check_undefined_refs deliberately does not parse resource names out of res_req/gpu_req free-form LSF-style expression strings (e.g. "mem>1000 rusage[mem=1000]") — design.md's xcecommon.validation component scopes this check to queue→host-group and limit→group/resname only. limits.yaml's projects field and scaler.yaml name collisions are likewise out of scope — no projects.yaml catalog exists among the 7 config types, and Requirement 4.3 only enumerates queue/host/resource/group/limit names. src/configs/hosts.yaml has 2 pre-existing undefined refs (resource mg, host h3) that now surface as warnings — expected, not a regression; fixing the example fixture is outside this task's boundary.

• 2.2: The real controller.capnp names its reply struct RequestReply, not Reply as design.md's postcondition states — an inexact design pseudo-type, corrected empirically (verified directly against src/schema/controller.capnp, not assumed). pycapnp 2.0.0/capnproto 1.2.0 abort the whole process (uncaught C++ exception, not a Python exception) on a missing cross-file import or malformed .capnp content passed to capnp.load() — a bare try/except cannot catch this. xcecommon.schema.load_schema() works around it by pre-validating in an isolated subprocess before ever calling capnp.load() in the caller's own process, converting any abort into a clean SchemaNotFoundError. Any future code that calls capnp.load() directly (bypassing this loader) reintroduces the crash risk — always go through xcecommon.schema.load_schema().

• 2.3: map_all_sections() (a SECTION_MAP-driven orchestrator, not explicitly named in design.md's Service Interface but consistent with its Contracts) is the single call xceadmin.build (task 3.1) needs — it treats a missing YAML file identically to a present-but-empty section (byte-for-byte), satisfying Requirement 1.5 structurally. target.init(field, 0) and never touching an empty/absent list field produce different serialized bytes for the same logical "nothing here" value (verified empirically) — the mapper always picks "never touch" for byte-determinism (9.1). Calling .to_bytes() twice on the same capnp builder triggers a spurious "message already written" UserWarning even when no field was mutated between calls — capture the bytes once and reuse them rather than calling .to_bytes() again.

• 2.4: errors.py's exception subclasses (task 1.2) all take message as an explicit first constructor argument in addition to their structured fields (e.g. ConnectionTimeoutError(message, host, port), ReplyDecodeError(message, reason)) — design.md's abbreviated Service Interface type stubs (class ConnectionTimeoutError(XceAdminError): host: str; port: int) read as if only the structured fields were needed; always check the real constructor in errors.py, not the design doc's shorthand. xcecommon.wire is deliberately opcode-agnostic — send_request/send_frame/recv_frame move raw bytes only and never import a capnp type; callers own .to_bytes()/.from_bytes(). Reused ha/data/xce.crt/xce.key (the repo's existing dev cert pair, same one deploy-ha.sh already copies for controller TLS) as the test fixture for both the TLS test server and the client cert_dir — no synthetic cert generation needed.

• 3.1: Requirement 1.7's "unrecognized-but-schema-valid field" warning is real and fires on essentially every real build using src/configs/resources.yaml — resources.yaml's type key is required by resources.schema.json (required: [name, type]) but has no ClusterConfig destination (per xcecommon.mapping's documented decision not to guess the valtype/ordtype/flags integer encoding), so every valid resource entry triggers a "field 'type' ... ignored" warning unconditionally, not just for unusual input. This is a disclosed spec tradeoff, not a bug — flagged here so a future pass over xceadmin.build's warning UX (e.g. only warning once per field-name per run instead of once per item) knows the noise is expected, not a regression. xceadmin.build's unmapped-field table (_UNMAPPED_BUT_VALID_ITEM_KEYS) was derived by cross-referencing xcecommon.mapping's per-item builder functions against the real src/configs/schema/*.schema.json property lists directly (not from prose alone) to avoid drift.

• 3.2: design.md's Dependencies list for xceadmin.discovery names only xcecommon.wire, but decoding a reply to inspect RequestReply.redirectHost/.redirectPort genuinely requires xcecommon.schema too (verified real field names against controller.capnp:594-595, which matched design.md exactly this time — unlike task 2.2's Reply/RequestReply struct-name slip). Treated as a design-doc omission, not license to hand-roll capnp decoding. follow_redirects's cert_dir parameter is accepted for signature parity with design.md but unused internally — all I/O, including TLS setup, is delegated to the caller's send_fn closure, which is expected to already carry its own cert_dir. A connection timeout to any hop (including a non-initial one reached via redirect) raises NoPrimaryError naming that specific hop, not the original target.

• bug-1461 (out-of-band, between 3.2 and 3.3): controller.capnp had a real, confirmed schema bug — a locally-declared struct Data (an OPCode_get query-result tagged union) shadowed Cap'n Proto's builtin Data blob type for every later : Data field in the file, miscompiling UpgradeConfigRequest.sha256/.bytes (and 5 other fields across ReplConfigReply/ReplConfigPushRequest/ReplEnvelope/SnapshotTransfer/WalCatchupEntry/CtrlHelloRequest, several HA-critical) as a struct-pointer type instead of a byte blob — blocking push_config() from constructing a valid request via pycapnp. Fixed at the root (renamed the local struct to XceData, $C.mapname("xce_data_t") unchanged so the C typedef is stable) across 20 files spanning controller/lib/scheduler/Go — see commit e53c086 and .wolf/buglog.json bug-1461 for the full investigation and fix. This was NOT an admin-config-tool-boundary change; it's a pre-existing, cross-component schema defect that happened to block this task. push_config()'s real controller counterpart remains untested live — a separate, already-documented dispatch-gate defect (ha_dispatch_gate()/cluster.c, spec.json blocked_on) still blocks that independently of bug-1461.

• 3.3: probe_config() does NOT go through xceadmin.discovery.follow_redirects — ProbeConfigTagReply is a direct struct with only configTag, no redirectHost/.Port fields exist on it at all, so there is no redirect signal for follow_redirects (which unconditionally decodes replies as RequestReply) to read; only push_config()'s Request/RequestReply-wrapped exchange supports redirects. ProbeConfigTagReply also carries no accept/reject signal — DryRunResult.accepted is a client-side inference (true on any successful round-trip), matching the real C reference client (config_repl.c's xce_probe_config_tag, which also always sends an empty name and returns only a bare tag). pycapnp union field assignment for Void/Text-typed variants (e.g. reply.data.nodata = None, reply.data.debugmsg = "...") must use direct assignment, not .init(name) — .init() without a size is only valid for struct/list/data-typed variants, confirmed via KjException: init() without a size is only valid for struct and object fields.

• 4.1: xcecommon.wire.connect() deliberately lets ConnectionRefusedError/other bare OSErrors propagate unwrapped (documented in wire.py's own module docstring) — xceadmin.cli is the layer that catches OSError and formats it per Requirement 7.1, alongside its except XceAdminError dispatch surface; a task 4.1 implementer must not assume XceAdminError alone covers every network failure mode. click 8.3.1's CliRunner no longer accepts mix_stderr=; result.stdout/.stderr are separated by default, but CliRunner's output capture decodes as text and is lossy for arbitrary binary (confirmed: bytes(range(256)) does not round-trip through the captured .output string) — do not assert exact byte content of a -o - binary write through CliRunner; that's already covered at the write_output() unit level (task 3.1's test_config_build.py). A CLI test that omits -o falls through to the real default (cluster.bin, relative to CWD) — always pass an explicit -o <tmp_path> in tests that reach the write step, or the test will write a stray artifact into the actual repo working directory (caught via git status before commit, not by the test itself).

• 4.2: deploy-ha.sh resolves both xceadmin ($SCRIPT_DIR/../xceadmin/.venv/bin/xceadmin) and the YAML configs source ($SCRIPT_DIR/../configs) relative to the script's own location ($(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)), not the caller's CWD — matches the project's other relative-path scripts and keeps the deploy working regardless of where it's invoked from. --build-config is parsed out of "$@" before positional-arg assignment so it can appear anywhere in the argument list, not just a fixed position. Verified live against the real xceadmin build and src/configs/: missing cluster.bin auto-builds (8.4), an existing one with no flag is left byte-for-byte untouched — same mtime, same SHA (8.5), and --build-config against an existing cluster.bin forces a rebuild that reproduces byte-identical content (8.3, confirming 9.1's determinism guarantee holds through this path too).

• 5.1, 5.2: Already fully satisfied by task 2.3's test_mapping.py and task 2.4's test_wire.py respectively — same requirement lists, same acceptance bullets (in-memory-only mapper coverage + the explicit two-field case for 5.1; a fixed known byte sequence + real loopback round-trips for 5.2). No new tests written; would have been pure duplication.

• 5.3: Found and fixed a real gap while writing test_schema_bundling.py — xcecommon.validation.validate_yaml()'s json.loads(schema_path.read_text()) call (loading the bundled JSON validation schema itself, not the operator's YAML) had no error handling, so a corrupted bundled JSON schema crashed with a raw json.JSONDecodeError instead of a clean ValidationError — the same "crash vs. clean error" class of bug task 2.2 already fixed for controller.capnp, just on the JSON-schema side, and not caught by task 2.1 since that task's tests only exercised operator-YAML failure modes, never a corrupted schema file. Fixed by wrapping it and raising ValidationError(..., constraint="schema-corrupted"), matching the existing missing-schema handling's pattern one function above it. Gotcha for any future task touching xcecommon/xceadmin source: editing a source file does NOT propagate to a running .venv until reinstalled — always re-run xce-build.sh xceadmin after a source edit before trusting a bare .venv/bin/python -m pytest result; a stale venv (especially one left in release/pinned mode by a prior profile run) will silently test the old code and produce a false failure (or false pass) that looks like a real bug.

• 5.4: tests/fixtures/{minimal,full}/configs/*.yaml + checked-in expected.bin golden files added to test_config_build.py (not a new file — design.md's File Structure Plan lists the SAME requirement set for test_config_build.py under both 3.1 and 5.4). full/configs/*.yaml is a byte-for-byte copy of src/configs/*.yaml; its golden SHA (860cfd4f59ef...) independently matches the tag deploy-ha.sh produced in task 4.2's live verification against the same source files — an unplanned but welcome additional confirmation of Requirement 9's cross-context determinism guarantee. Golden-file tests catch representation drift (bytes change even though decoded content is still semantically correct) that purely structural/decode-based assertions elsewhere in the suite cannot detect; regenerate expected.bin deliberately (via build_cluster_config(), sanity-checked by decoding it back) whenever a real, intentional field-mapping change lands — never hand-edit the binary.

• 5.5: Already fully satisfied by task 2.1's test_validation.py — every sub-case (schema violation, reserved name, cross-type duplicate collision via test_check_duplicates_allows_limit_name_to_collide_with_queue_name, undefined reference) already has an explicit test with the exact same requirement list. No new tests written.

• 5.6: probe_config()'s dry-run has no reachable accepted=False path — ProbeConfigTagReply genuinely carries no rejection signal on the wire (see task 3.3's note). 5.6's bullet asking for both an accepted and a rejected outcome cannot be satisfied without inventing undocumented client-side rejection logic; instead added test_probe_config_has_no_wire_level_rejection_signal_by_design (parametrized over several configTag values) that locks in and documents the limitation explicitly rather than leaving it silently uncovered. Added two new end-to-end propagation tests through push_config's real composition with xceadmin.discovery (not just discovery.py's own unit tests): a real 4-mock-server redirect chain proving TooManyRedirectsError surfaces correctly, and a NoPrimaryError-on-timeout test that monkeypatches xcecommon.wire.connect to raise ConnectionTimeoutError immediately rather than waiting out a real 30s socket timeout.

• Post-implementation, out-of-band (2026-07-22): reopened and reversed the 2026-07-21 "not wired into meson" Design Review correction — see design.md's File Structure Plan Amendment for full rationale and verification. Summary: added src/xceadmin/meson.build (custom_target(), stamp-file output, build_always_stale: true) + src/xceadmin/meson-build.sh (out-of-tree install+test, repo-mirror/ symlink staging so src/configs/, src/schema/, ha/data/ relative-path test assumptions still resolve from a copied location); src/meson.build gained subdir('xceadmin'); src/tools/xce-build.sh's xceadmin) case now delegates to meson compile -C "$BUILD_DIR" xceadmin instead of its own pip/venv logic. Verified both meson compile (165/165 passed against a real dev checkout with certs present) and nix build --option sandbox false .#xcecore_debug (128 passed / 37 skipped — cert-dependent tests correctly skip under nix's git-tracked-only hermetic source, since ha/data/xce.crt/.key are intentionally not committed). AppImage bundling (README 3.5) explicitly deferred, not part of this change. Net effect on Requirement 8: the editable-vs-pinned distinction (8.1 vs. 8.2) collapses — every xce-build.sh xceadmin run is now the pinned/meson-driven path, a strictly stronger guarantee than the old default.

• Post-implementation, out-of-band (2026-07-22, second pass): meson-build.sh/meson-install.sh no longer resolve python3 via a bare PATH lookup — meson.build now pins it once via import('python').find_installation('python3') (same mechanism as find_program('go')/capnp/packcc elsewhere in this build, visible at meson setup time as Program python3 found: YES (/nix/store/...)) and threads the resolved path into both scripts explicitly. Verified: meson setup prints the pinned interpreter, rebuild stays 165/165 green, and the built venv's own python3 resolves through to that exact store path.

• Post-implementation, out-of-band (2026-07-22, third pass — removes ha/data/ entirely): deploy-ha.sh no longer takes a <data-dir> argument at all (--build-config flag also removed) — every invocation now generates a fresh self-signed TLS cert/key (openssl req -x509 -newkey rsa:2048 -nodes -days 3650, 10y validity) directly into the deploy dir's certs/, and builds cluster.bin directly into controller/ctrl-1/conf/ via xceadmin, with no intermediate staging directory. run-ha-soak.sh (/xce-test-ha) updated to match: dropped its own XCE_HA_DATADIR-based precondition entirely, since deploy-ha.sh now handles both cert and config generation itself. Updated 4 callers (run-ha-soak.sh, test-heartbeat-tolerance.sh, test-commit-durability.sh, plus both xce-deploy-ha/xce-test-ha SKILL.md docs) to the new 3-arg signature. ha/data/{xce.crt,cluster.bin} removed from git tracking (cluster.bin was already gitignored from the prior pass; the certs were a real checked-in TLS private key, now gone from history going forward).

  Investigating this surfaced a real, independent finding: xcecommon.wire.connect() was loading a client-side TLS cert (context.load_cert_chain(...) on the PROTOCOL_TLS_CLIENT context) — verified against the actual reference implementation (netio.c's create_ssl_context()) that the real client presents no certificate at all when cert_file/key_file are NULL (bare TLS_client_method(), no SSL_CTX_use_certificate_chain_file/SSL_CTX_use_PrivateKey_file call). xceadmin's client diverged from the reference client it's meant to mirror. Fixed: connect() no longer loads a client cert or takes a cert_dir parameter at all. Since nothing else consumed cert_dir (no CA verification happens either — verify_mode=CERT_NONE throughout), removed it end-to-end: xceadmin.discovery.follow_redirects()'s cert_dir param (already dead/noqa'd — signature-parity leftover), xceadmin.push.push_config()/probe_config(), and the --cert-dir CLI flag on config push. Server-side cert loading (the mock TLS servers in test_wire.py/test_cli.py/test_config_push_mock.py) is unaffected and still needed — moved into a shared session-scoped tls_certs fixture in a new tests/conftest.py (openssl-generated, same approach as deploy-ha.sh), replacing 3 duplicated module-level REPO_HA_DATA_DIR/pytest.mark.skipif(not ha/data/xce.crt...) blocks. Net result: those 3 files' TLS-dependent tests no longer skip under a hermetic nix build sandbox (which never had ha/data/ in its git-tracked-only source) — verified 165/165 passed, 0 skipped, both via meson compile and via a full nix build --option sandbox false .#xcecore_debug rebuild (previously 128 passed / 37 skipped there). Requirements 2.3/2.4 and 8.3/8.4/8.5 marked superseded in requirements.md with dated correction notes rather than silently rewritten.