Implements repl_fmt_jobid_range() in repl.c (per design.md's "no new
production .c file" commitment), grouping job-array identifiers by base
and compressing contiguous index runs into [lo-hi] ranges. All 5 of task
1.1's RED-phase tests now pass.
Went through one review round: an initial GREEN implementation placed
the function in a new file (repl_jobid_range.c) to sidestep a linker
issue in the lean test target from task 1.1. Review found and verified
a cleaner fix: link the test against the full scheduler_srcs object list
(mirroring the existing sched_scheduler_connect_test precedent), which
resolves the same symbols without a new file. Remediated accordingly;
bug-1762 in buglog.json documents the investigation.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YAWMhfRJFnmmnG8h97yUDd
Starts a real worker (auto-detects xcecd_virtual vs. real xcecd, mirroring
xce-deploy-ha's own detection) + xce_scheduler alongside the controller
cluster, dispatches a genuine job, kills the primary while it's RUN, and
verifies the worker rejoins the new primary and the job recovers to DONE
via real reconciliation -- closing the "no real daemon-to-daemon smoke
test" gap flagged by worker-rejoin-resync's own feature validation.
Live-verified end-to-end multiple times (sequential and chaotic, 2 rounds
each) against a real 3-node cluster.
Also logs two bugs discovered along the way (not fixed, out of scope for
this test-infra change): bug-1759 (scheduler sim-mode dispatch/PEND
inconsistency) and bug-1760 (scheduler has no periodic post-failover
reconnect check, only a reactive one gated on its own next successful
publish -- a chicken-and-egg deadlock, live-confirmed via 60s+ of stuck
PEND with zero scheduler log activity). bug-1760 is worked around in this
harness only by restarting the scheduler process after each new-primary
election; the underlying gap is unfixed.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019ypUeKgbAqLWUkaSJ79poN
Extends task 4.3's post-join gating to resource_sync_thread()'s
independent periodic reporting pthread, closing the Requirement 3.8 gap
where load-indices sends could interleave with an in-flight job-state
reconciliation report. Also fixes two pre-existing latent bugs
(bug-1756, bug-1757) in resource_sync.c that blocked a truthful RED/GREEN
signal for the new tests.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019ypUeKgbAqLWUkaSJ79poN
Closes bug-1755: worker_send_resync_query() hardcoded pktlimit=0 in
its xce_job_state_query_req() call, so the controller's outbound
OPCode_jobStateQuery always sent every non-terminal job ID in one
unbounded page regardless of count - the query direction never
actually exercised the pagination mechanism task 1.4/7.4 proved
correct, unlike the report direction's real, wired
XCECD_RESYNC_REPORT_PKTLIMIT bound.
Add XCE_RESYNC_QUERY_PKTLIMIT=100, mirroring that exact precedent
(same value - a JobStateQuery entry is a bare jobid, smaller than a
JobStateReport entry), and thread it into the one call site. Existing
small-job-count behavior is unchanged; a rejoin exceeding the cap now
genuinely produces multiple wire pages, proven against the real
production call site (not a bypass) with a 250-job/3-page test.
This is the last task in worker-rejoin-resync's implementation plan.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y4M5MJM2zK6nU43da267Ku
Add test_large_job_count_pagination_correctness, proving both
OPCode_jobStateQuery and OPCode_jobStateReport genuinely span many
wire pages (1042 jobs, 11 pages each direction, including a partial
final page) with zero jobs dropped/duplicated/truncated - exact-count
assertions throughout (page continuity, no-duplicate bitmap, exact WAL
delta, exact hook-fire count), extending task 6.2's 2-page proof by an
order of magnitude. Test-only, no production changes.
Logs bug-1755: the underlying query-pagination mechanism this test
proves correct is never exercised in production - worker_send_resync_
query() hardcodes pktlimit=0, so the controller's real query send
always produces one unbounded page regardless of job count, asymmetric
with the report direction's real XCECD_RESYNC_REPORT_PKTLIMIT bound.
No hard transport-layer size cap exists, so this isn't a demonstrated
failure mode, but it contradicts design.md's explicit "both paginated"
claim in this feature's own headline mechanism. Adds task 7.5 to close
it with a small, well-scoped fix before the feature-level gate, rather
than leaving a silently-false design claim in the completed feature.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y4M5MJM2zK6nU43da267Ku
Add test_failover_during_job_recovers_lost_finish, a focused proof of
the feature's own original motivating scenario (bug-1741): a job
dispatched and RUN with no finish fact ever committed anywhere
(modeling a lost fire-and-forget finish notify), recovered to DONE
with the worker-reported finish time - not stuck in RUN - via the
real rejoin/query/report/apply chain. Test-only, no production
changes; reuses task 7.1's helper infrastructure rather than
duplicating its broader four-outcome coverage.
Updates the existing bug-924 (/tmp exhaustion / flaky teardown) entry
with a 5th occurrence hit during validation, unrelated to this task's
own change.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y4M5MJM2zK6nU43da267Ku
Add test_full_rejoin_reconciliation_round_trip proving the whole
chain composes end-to-end in one round, for a mix of still-running,
finished-success, finished-failure, and unrecognized jobs: real
rejoin_worker() -> worker_send_resync_query() (real wire query) ->
hand-built worker answer through the real report codec ->
resync_handle_report_page() -> resync_apply_report(), asserting
correct final state and scheduler notification for each. Test-only,
no production changes.
Logs bug-1754: a worker-reported job failure's exit code is never
durably recorded anywhere in this codebase (distinct from bug-1747's
finish-time gap) - discovered honestly asserted by the new test,
out of scope for this validation-only task.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y4M5MJM2zK6nU43da267Ku
Add OPCode_jobStateReport dispatch in myreq_handler, reassembling a
report across multiple incoming pages before handing it to task 3.2's
resync_apply_report() exactly once - proven via a test-only call
counter, not just end-state equivalence (a double-apply could pass an
end-state check if idempotent).
Standby-redirect investigation (Req 8.1/8.3): confirmed
ha_dispatch_gate already redirects every rejected opcode uniformly, so
no opcode-specific code was needed for that. OPCode_jobStateQuery has
no controller-side receive path at all (only sent, never received)
so needed no gate change either.
That same investigation found a different, more consequential gap:
fixes bug-1753, ha_dispatch_gate's quorum-loss fact-admission allowlist
(OPCode_notify/update/setpreason/clrpreason) was missing
OPCode_jobStateReport, so a report arriving during a transient
quorum-loss window - this feature's own core failover scenario - would
be rejected outright with no retry (worker sends fire-and-forget).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y4M5MJM2zK6nU43da267Ku
Arm a reconciliation round in apply_join_state() the moment a worker
host becomes connected (first join, reconnect, or failover-reconnect -
all routed through the same shared call site, Req 1.1-1.3), then send
the query from on_worker_join() strictly after the join reply and
existing config push (Req 2.1-2.2), verified via a structural test
that reads real wire order off the endpoint queue.
Also closes Req 3.7's config-delivery seam end-to-end: worker_resync_
window_ms now rides the existing Conf4Worker push (clustername
precedent, no new opcode) and the worker applies it to its retention
window on receipt.
Fixes bug-1752: myreq_handler had no OPCode_push dispatch case at all,
so every config push - including the pre-existing clustername field -
was silently discarded. Confirmed harmless until now (clustername was
never read anywhere in src/worker/); closed narrowly for
worker_resync_window_ms only.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y4M5MJM2zK6nU43da267Ku
Recorded as a Do-Not-Repeat: editing buglog.json via json.load/dump
without ensure_ascii=False silently reformats every existing entry's
unicode punctuation into \uXXXX escapes, ballooning the diff. Caught
and fixed forward twice already this session (once by me, once by a
dispatched task-5 implementer) - documenting so future task subagents
that touch buglog.json don't repeat it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y4M5MJM2zK6nU43da267Ku
Task 5's own bug-1751 append re-serialized the whole file with
ensure_ascii=True, turning every existing em-dash/arrow into a \uXXXX
escape across 421 unrelated entries. No content changed - restoring
the literal characters to keep the file's history diffable.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y4M5MJM2zK6nU43da267Ku
Extend the IS_WORKER_UNAVAIL-style candidate-host filter to also skip
a host with XCE_WORKER_RECONCILING set (Req 5.1), naturally
re-including it once the bit clears with no separate mechanism (Req
5.2). Leaves the scheduler's decision-publish code and its
symbol-guard regression test untouched.
Fixes bug-1751: design.md's cited filter site (scheduler.c's
sched_reset_worker_(), via sched_begin_session()) is dead code on both
live drivers - driver.c/sim_loop.c actually call
xce_core_begin_session() -> core_session.c's core_reset_workers(), an
independently-maintained mirror not listed in design.md's File
Structure Plan. Applied the identical disjunct to both sites so the
task's own observable-completion criterion holds in production, not
just on the literally-cited dead path.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y4M5MJM2zK6nU43da267Ku
Add OPCode_jobStateQuery dispatch to myreq_handler with multi-page query
reassembly, routing to task 4.2's xcecd_resync_answer_query() (Req
8.1, 8.3). Gate the worker's resumption of normal post-join operation
on a resync_pending flag until the full report has sent (Req 3.8).
Fixes bug-1749 (xcecd_resync.c was never added to the worker's
production source lists - task 4.2's build only ever exercised it via
the test binary's white-box include).
Round 1 review caught bug-1750: the gate sat as checking_connection()'s
entry guard, so a connection drop mid multi-page query left
resync_pending stuck forever, permanently disabling the worker's only
reconnect mechanism (Req 6.1 violation). Round 2 narrows the gate to
guard only the rejoin action, and resets it from xcecd_on_reconnect()
so a stalled query can never wedge it past one reconnect cycle.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y4M5MJM2zK6nU43da267Ku
Add resync_apply_report()/resync_apply_running_entry()/
resync_apply_finished_entry()/resync_apply_unrecognized_entry() to
resync.c: routes each entry in a worker's job-state report to the
correct existing idempotent path (still-running -> clear from outstanding
set, no fact; finished-success/failure -> record_job_finish_fact_at/
on_job_fail; unrecognized -> record_job_reconcile_pending_fact;
unqueried extra -> record_job_reconcile_assign_fact or no-op), discards
reports for superseded rounds (Req 6.1/6.3), and resolves the round once
its outstanding set empties.
Also fixes bug-1747 (Req 4.2): adds record_job_finish_fact_at(),
additive alongside the unmodified record_job_finish_fact, so a
finished-success reconciliation entry records the WORKER-reported
finish time instead of reconciliation-processing time -- proven via a
real WAL-write + persist_recover() restart-replay test. The FAIL-side
half of the same gap (WAL_JOB_FAIL carries no fail-time wire slot at
all, for any caller) is confirmed pre-existing and systemic, correctly
left out of this task's scope.
Three review rounds surfaced and fixed two real, distinct bugs in the
unqueried-extra-job routing guard (see tasks.md's Implementation Notes
for the full account and the general lesson about re-deriving a full
truth table after a partial boolean-guard fix): round 1 caught the
wrong axis (terminal-vs-non-terminal instead of assignment-status,
Req 4.8); round 2 caught that the first fix's short-circuit clobbered
an already-terminal job's DONE/EXIT back to RUN (Req 4.4), including
confirming the implementer's own test had certified the bug as correct;
round 3 independently re-derived the final three-way guard from scratch
and found no further defect. bug-1748 logged for the guard fix.
Full controller suite: 1239 tests, 0 failures.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y4M5MJM2zK6nU43da267Ku
Add record_job_reconcile_assign_fact(cluster_t*, job_t*, worker_t*,
xce_job_state_entry_t*) to job.c: eagerly sets job->job.state to match
the worker's reported outcome (mirroring dispatch_a_job_'s inline
mutation, minus allocation fields -- there are none to set, job->job.allocs
stays NULL per Requirement 4.8's documented scope). Calls the existing
persist_submit_job_dispatch_fact(..., alloc=NULL) directly, then leaves
the post-unlock persist_notify_job_updated_already_persisted() call to
the caller, same convention as task 2.1.
Fixes bug-1746 along the way: capnp_encode_joballoc() (persist.c, part
of bug-1678's original fix, predates this feature) unconditionally
dereferenced a NULL alloc -- never triggered before since
dispatch_a_job_ (the only prior caller) always passes non-NULL. Fixed
with a minimal guard producing a true zero-length buffer, matching
apply_committed_entry's alloc_len > 0 decode gate exactly. This
directly contradicted design.md's "tested, backward-compatible on both
seams" claim (true only for decode, never actually exercised for
encode) -- corrected in 4 places.
2 tests: applies-running-no-allocs-and-notifies, and a real restart-
replay round trip (write to real disk, fresh persist_recover(), confirm
jobid/host/state/NULL-allocs survive) -- proving this task's own
"durably survives a restart replay" completion criterion literally, not
just the in-memory mutation.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y4M5MJM2zK6nU43da267Ku
Add record_job_reconcile_pending_fact(cluster_t*, job_t*) to job.c:
eagerly applies apply_job_update_transition(job, JOB_STAT_PEND) (real,
live mutation, not a deferred peek -- matching dispatch_a_job_'s
established pattern, not record_job_finish_fact's), releases
job->job.allocs on an applied (non-no-op) transition, then durably
appends via the generic persist_submit_job_fact(WAL_JOB_UPDATE). Caller
holds job's lock throughout and is responsible for calling
persist_notify_job_updated_already_persisted() after unlocking -- this
function deliberately does not call it itself.
Closes bug-1631 at this new call site: a RUN job with a real allocation
reconciled to PEND (Requirement 4.6, worker reports it unrecognized)
would otherwise carry a stale allocation into its next dispatch attempt,
exactly the gap bug-1631 documented as dormant until something re-admits
an already-dispatched job to the scheduler's PEND pool -- this feature
is that path. dispatch_a_job_ itself is unchanged (still correct for a
job's first-ever dispatch, the only case reachable there).
3 tests: allocs release + eager-mutation-before-unlock proof, no-op on
already-pending, and the Requirement 4.4 terminal-state-preservation
proof (rejects overwriting JOB_STAT_DONE).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y4M5MJM2zK6nU43da267Ku
xcecli hosts list showed NUM_RUN/NUM_SSUSP/NUM_USUSP as always 0 --
the fields existed on HostInfo and were displayed, but nothing ever
assigned them. processHostData now derives per-host slot usage from
the live job store (exec_hosts + job_status), counting occupied slots
so the numbers are comparable to MAX_SLOT.
Partial fix for gitea#46 / bug-1743: the separate "dispatch stops at
8/16" question needs the reporter's live limits.yaml/pend-reason to
confirm a usergroup/queue slot limit, not addressed here.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y4M5MJM2zK6nU43da267Ku
xcecli jobs kill/stop/resume/checkpoint failed for every job with an
empty error body. models.JobInfo.JobStatus/.ArrayIdx are plain Go
`int`, but validateJobControl/foundJob asserted them as `int64` via a
bare type assertion, which always panicked; Gin's Recovery()
middleware swallowed the panic and returned an empty 500.
Fixes gitea#45 / bug-1742.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Y4M5MJM2zK6nU43da267Ku
Two root causes, confirmed by direct code reading (previously misattributed
to an overlayfs sandbox fdatasync artifact):
conf_trim_old_versions() sorted config-version files by st_mtime (second
resolution). The test writes 3 versions 15ms apart -- well within one
second, so ties are the expected outcome, not a rare edge case. qsort()
isn't stable, so a tied ordering could push the protected current-pointer
file (skipped on deletion, never compensated) past keep_n, leaving one
extra file on disk ("Expected 2 Was 3"). Fixed by sorting on st_mtim
(nanosecond-resolution struct timespec) instead of st_mtime.
cr_setup() keyed its tmpdir on getpid()+time(NULL) (second resolution),
risking collision with a stale directory left by an earlier interrupted
run (ASAN abort, timeout, SIGKILL -- none reach cr_teardown()'s rm -rf)
reusing the same PID within the same second -- test_conf_get_saved_tag_
no_config then observed that directory as "not actually empty" and read
a leftover tag instead of the expected 0. Fixed with a monotonic counter
guaranteeing a unique directory per cr_setup() call.
TDD: RED reproduced on the first attempt (both tests failed with the
exact historical signature). GREEN confirmed across 16+ repeat runs
after the fix, zero other regressions.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019QxaSzHRB7pmYFp4cVnwkA
Found while chasing bug-1714's crash (root cause still open -- see that
entry): two related, independently-confirmed defects, not proven to be
bug-1714's own cause but real bugs on their own merits.
xce_core_push_events()'s JOBS_PUSH case never checked sched_add_job()'s
return value -- if key_add() failed (duplicate jobid), the freshly-built
xce_sched_job_t was handed to picker_iface->on_job_push() anyway, even
though it was never registered in core->jobs. An orphaned job the
picker knows about but sched_get_job() can never find again. Now checks
the return, frees the orphan (at core_build_job()'s own established
cleanup granularity -- xce_sched_job_t has no complete destructor
anywhere in this codebase, kill_sched_job() only frees ->rusages, so
this intentionally doesn't invent a more thorough one), and skips the
picker call.
This makes it safe to fix (not the other way around): sched_on_job_array()'s
per-element dedup check (handler.c) has a TOCTOU race -- a job is only
added to core->jobs later, by the driver thread, so a redelivered array
push arriving on the request thread before the driver catches up isn't
caught. Documented as a best-effort optimization, not a correctness
boundary -- the actual authoritative uniqueness check is sched_add_job()'s
key_add(), which the JOBS_PUSH fix above now handles correctly.
TDD: new test reproduces the duplicate-jobid path (RED: on_job_push
fired twice, Expected 1 Was 2), GREEN after the fix. Full scheduler
regression: 54/55, only the known bug-1561-adjacent flake.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019QxaSzHRB7pmYFp4cVnwkA
Follow-up to ebe691c3 (HOOK_DETAIL_JOB_START/JOB_EXIT), same gap for job
failures: apply_committed_entry()'s WAL_JOB_FAIL case only ever fired
the generic HOOK_DETAIL_JOB_UPDATE, leaving sched_job_fail_fun (sched.c)
and apiserver_job_fail_fun (apiserver.c) dead -- the apiserver's
OnJobFinished was starved of data for job failures specifically (the
prior fix only closed this for clean finishes).
Fires HOOK_DETAIL_JOB_FAIL only for the WAL_JOB_FAIL_STAGE_FLAG branch,
which already constructs a real job_failinfo_t -- the legacy _pad==0
absolute-overwrite branch has no fail-specific data and must not
fabricate one, mirroring how the WAL_JOB_START fix only fires when
pidinfo was genuinely decoded. Unlike WAL_JOB_START, no gate-widening
was needed: apply_job_fail_transition() always returns
JOB_TRANSITION_APPLIED for a genuine new fail transition (confirmed by
reading it), so the existing result-gated early return already covers
this correctly.
TDD: RED confirmed (fix reverted, test failed "Expected 2 Was 1"),
GREEN after restoring it. Full regression: 1220 tests, only the known
bug-1561 flake.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019QxaSzHRB7pmYFp4cVnwkA
The `worker)` case's meson compile target list omitted xcecd_virtual --
the no-root worker binary deploy-ha.sh/the xce-deploy-ha skill needs
whenever no real systemd manager is present (the common sandbox case).
/xce-build worker alone left it unbuilt, so deploy-ha.sh silently
soft-skipped generating start-worker.sh. Verified: xcecd_virtual now
builds with a fresh mtime, full worker suite still 5/5.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019QxaSzHRB7pmYFp4cVnwkA
Adds the previously-uncommitted spec.json/requirements.md/design.md/research.md
for scheduler-snapshot-job-allocation (feature now fully implemented across
tasks 1.1-4.5) and the in-progress xce-test-cli-ux spec's requirements.md/
spec.json. Updates brief.md, a security.md note on an unrelated deferred RBAC
persistence gap found during this feature's cross-component survey, and syncs
OpenWolf's anatomy/memory/token-ledger/daemon-log bookkeeping.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SSuXfK6nD1Nue5EjjdhjNZ
Task 1.1: new deep-copy for xce_job_alloc_t composed from existing
make_alloc/make_host_alloc/make_job_alloc, explicitly preserving each
allocation's original from/duration rather than accepting make_alloc's
own time(NULL) stamp. TDD: 6 new unit tests (single-host, multi-host,
multi-resource-per-host, shared-resource-pool, independence-after-free,
from/duration fidelity), all passing under ASAN.
Also logs bug-1723 (pre-existing, unrelated leak in two bug-1722 test
fixtures, confirmed via git-stash A/B rebuild to be byte-for-byte
identical before and after this change) -- documentation only, not fixed
here.
Requirements: 1.1, 1.4
